Vibration Institute - Discussion Zone

[ Home | Contents | Post ]

CONTENTS

Note: you may need to reload this page to see the most recent additions.

Sentinel Condition Monitor bj@ptadaro.com 5/10/05

SCHENCK VIBRO PORT 30 FOR SALE rudi1@mts.net 5/2/05

A new board is started Arne 5/2/05

Re: A new board is started Craig H 5/3/05

Shock Pulse Method Sumit 5/1/05

Re: Shock Pulse Method Arne 5/2/05

Re: Shock Pulse Method Gerard 5/4/05

Very Urgent JONE 5/1/05

New board is up Arne 5/1/05

Business Opportunity!! Ramdas 4/28/05

IRD 885 Power Supply Voltages/Pins - Can you help? Trimetric 4/27/05

Phase Readings (How) RAYG 4/26/05

Re: Phase Readings (How) Arne 4/26/05

Shaft Riders Phil Miller pmiller@cinergy.com 4/26/05

Re: Shaft Riders 5/2/05

Re: Shaft Riders 5/2/05

Re: Shaft Riders 5/2/05

Key length calculator Bill Schmitt 4/24/05

Re: Key length calculator RUDI ENGEL 5/2/05

Re: Key length calculator Arne 4/24/05

VI has a new board up Arne 4/22/05

Re: VI has a new board up shawn 4/25/05

Vertical fan-vibration rudy@mace-inc.com 4/22/05

Re: Vertical fan-vibration valentino.gambini@dolphinenergy.com 4/23/05

Re: Vertical fan-vibration valentino.gambini@dolphinenergy.com 4/23/05

Cracked Roll Journals Randle 4/21/05

Re: Cracked Roll Journals Trimetric 4/21/05

Re: Cracked Roll Journals Doug 4/21/05

Re: Cracked Roll Journals Arne 4/21/05

Re: Cracked Roll Journals Randle 4/22/05

Re: Cracked Roll Journals Arne 4/22/05

Re: Cracked Roll Journals Alan 4/26/05

agitator gholam ali radaee 4/21/05

Article 8177 4/21/05

Article 8176 4/21/05

Article 8175 4/21/05

ODS Analysis Dennis Swanepoel 4/21/05

Re: ODS Analysis Rob 4/21/05

Re: ODS Analysis David Eason 4/28/05

Re: ODS Analysis MachineryWatch 4/21/05

Re: ODS Analysis Arne 4/21/05

Re: ODS Analysis Roy Gariepy 4/21/05

Vibration/OPTICAL/Speed SAMISM 4/21/05

Re: Vibration/OPTICAL/Speed Steve Schultheis 4/21/05

Re: Vibration/OPTICAL/Speed SAMISM 4/23/05

Re: Vibration/OPTICAL/Speed Steve Schultheis 4/25/05

Philadelphia Gear info Stumped 4/20/05

Re: Philadelphia Gear info 4/21/05

Abnormal Knocking Sound in Agitator vessel and agitator shaft heavy wobbling . dc_chauhan62@yahoo.co.in 4/20/05

Re: Abnormal Knocking Sound in Agitator vessel and agitator shaft... Shawn 4/20/05

Sideband activity in spectrum Jim P 4/19/05

Re: Sideband activity in spectrum Dennis Swanepoel (ABB SA) 4/21/05

Re: Sideband activity in spectrum Jim P 4/21/05

Re: Sideband activity in spectrum Arne 4/21/05

Re: Sideband activity in spectrum Jim P 4/21/05

Job Descriptions Tim Bowden 4/19/05

Dynamic range Gevenag 4/18/05

Re: Dynamic range MachineryWatch 4/18/05

Re: Dynamic range Eduardo Murphy 4/18/05

Spectral Appearance of Offset Misalignment 4/17/05

Re: Spectral Appearance of Offset Misalignment Trimetric 4/21/05

SCHENCK VIBRO PORT BALANCING MACHINE rudi1@mts,net 4/17/05

Motor Test Equipment for Electrical Workshop SSK 4/17/05

Re: Motor Test Equipment for Electrical Workshop Dave G. 4/21/05

Re: Motor Test Equipment for Electrical Workshop MachineryWatch 4/18/05

Re: Motor Test Equipment for Electrical Workshop Jim P 4/18/05

Re: Motor Test Equipment for Electrical Workshop arie mol, NL 4/18/05

ATLAS COPCO 160W PACK - VIBRATION FRECUENCIES COMPRESSOR MAN 4/16/05

motor problem shawn 4/14/05

Re: motor problem dparker 4/15/05

Re: motor problem shawn 4/15/05

Re: motor problem vibrant 4/15/05

Re: motor problem Shawn 4/15/05

Re: motor problem John 4/14/05

Re: motor problem MachineryWatch 4/14/05

Re: motor problem 4/14/05

Re: motor problem Shawn 4/15/05

Re: motor problem vibrant 4/15/05

Problem with the amplitude of shaft frequency D.A. 4/13/05

Re: Problem with the amplitude of shaft frequency Let me make a guess 4/13/05

Re: Problem with the amplitude of shaft frequency D.A 4/14/05

Re: Problem with the amplitude of shaft frequency Arne 4/14/05

Wireless data collection Kevin 4/12/05

Re: Wireless data collection 4/18/05

Re: Wireless data collection Alan F 4/18/05

Re: Wireless data collection Mark 4/13/05

Vibratory Conveyors Bill Schmitt 4/12/05

Re: Vibratory Conveyors Shawn 4/13/05

Re: Vibratory Conveyors Steve 4/12/05

CT Steve R 4/12/05

Re: CT abdul charmi 4/12/05

Cat II Exam - another question Steve C. 4/12/05

Re: Cat II Exam - another question Steve Schulthies 4/12/05

Re: Cat II Exam - another question Steve Schultheis 4/12/05

The Moreton Effect marktaylor007@bigpond.com 4/11/05

Re: The Moreton Effect Steve Schultheis 4/12/05

Re: The Moreton Effect 4/13/05

Re: The Moreton Effect Steve Schultheis 4/14/05

Re: The Moreton Effect Mark D 4/14/05

Re: The Moreton Effect Steve Schultheis 4/16/05

Re: The Moreton Effect M 4/14/05

Rotary Piston Hydraulic Pumps Bill Schmitt 4/11/05

Re: Rotary Piston Hydraulic Pumps dparker 4/11/05

Re: Rotary Piston Hydraulic Pumps Bill Schmitt 4/12/05

What is the best Rotor kit for the price John Graves 4/10/05

Re: What is the best Rotor kit for the price Arne 4/11/05

Re: What is the best Rotor kit for the price Dave G. www.reliabilitydirect,.com 4/10/05

Re: What is the best Rotor kit for the price 4/10/05

Re: What is the best Rotor kit for the price Michael Titone 4/11/05

queries on shaft alignment & runout measurement jignesh_gandhi@ril.com 4/10/05

runup & coastdown testing, part 2 arie mol, NL 4/9/05

Re: runup & coastdown testing, part 2 Arne 4/9/05

Re: runup & coastdown testing, part 2 Michael Titone 4/9/05

Re: runup & coastdown testing, part 2 Arne 4/9/05

BUSCO ANALISTA VIBRACIONES MEXICO MARTIN VAZQUEZ 4/8/05

Re: Mexico! Arne 4/9/05

Re: BUSCO ANALISTA VIBRACIONES MEXICO Eduardo Murphy 4/8/05

Re: BUSCO ANALISTA VIBRACIONES MEXICO VNUNEZ 4/8/05

Yankee dryer chatter marks Rodney 4/8/05

Yankee dryer chatter marks Rodney 4/8/05

Re: Yankee dryer chatter marks Mark D 4/14/05

Re: Yankee dryer chatter marks Arne 4/8/05

Re: Yankee dryer chatter marks Rodney 4/8/05

hot motor Iulian 4/8/05

Re: hot motor 4/9/05

Re: hot motor 4/9/05

Re: hot motor 4/11/05

Re: hot motor 4/9/05

Re: hot motor Arne 4/8/05

ISO 2372 Viki 4/8/05

Re: ISO 2372 Arne 4/8/05

Employment Opportunities Greg M. 4/7/05

Re: Employment Opportunities dparker 4/11/05

Re: Employment Opportunities 4/8/05

Re: Semi anonymus board, what is the hidden agenda here? Arne 4/8/05

Re: Semi anonymus board, what is the hidden agenda here? 4/8/05

New board in NY, U.S.A. Arne 4/9/05

Re: New board in NY, U.S.A. tony 4/9/05

Re: New board in NY, U.S.A. Arne 4/11/05

Portable Vib Analysis Equipment Steve B 4/7/05

Re: Portable Vib Analysis Equipment Dave 4/26/05

Re: Portable Vib Analysis Equipment Dave 4/26/05

Re: Portable Vib Analysis Equipment Shawn 4/7/05

Re: Portable Vib Analysis Equipment Dave G. www.reliabilitydirect.com 4/7/05

Re: Portable Vib Analysis Equipment arie mol, NL 4/7/05

Re: Portable Vib Analysis Equipment I Nolte 4/7/05

Shaft alignment & shaft runout measurement jignesh gandhi 4/6/05

Narrow Band Envelope Alarms Vibrant 4/6/05

Re: Narrow Band Envelope Alarms shawn 4/6/05

Most common problem with 3X and 4XRPM Vibrant 4/6/05

Re: Most common problem with 3X and 4XRPM rudi@midwesteng.mb.ca 4/6/05

Re: Most common problem with 3X and 4XRPM rudi@midwesteng.mb.ca 4/6/05

Re: Most common problem with 3X and 4XRPM rudi@midwesteng.mb.ca 4/6/05

Re: Most common problem with 3X and 4XRPM rudi@midwesteng.mb.ca 4/6/05

Re: Most common problem with 3X and 4XRPM 4/7/05

Crest Factor Alan 4/5/05

Re: Crest Factor Dave G. www.reliabilitydirect.com 4/5/05

Re: Crest Factor Dave G. 4/5/05

Re: Crest Factor vibrant 4/5/05

Re: Crest Factor dnk 4/11/05

Re: Crest Factor Alan 4/12/05

Re: Crest Factor Keith 4/12/05

Re: Crest Factor dnk 4/12/05

Re: Crest Factor MachineryWatch 4/5/05

Re: Crest Factor Alan 4/7/05

API617-July 2002 Hosseini 4/5/05

Re: API617-July 2002 Thomas Kurian 4/5/05

Re: API617-July 2002 Hosseini 4/13/05

Re: API617-July 2002 Arne 4/5/05

Runup & Coastdown testing Robert 4/4/05

Re: Runup & Coastdown testing Robert 4/6/05

Re: Runup & Coastdown testing Michael Titone 4/6/05

Re: Runup & Coastdown testing WCFoiles 4/4/05

Re: Runup & Coastdown testing 4/4/05

Re: Runup & Coastdown testing Arne 4/4/05

how to detect speaker rattling/fan rattling hnx2000 4/4/05

Re: how to detect speaker rattling/fan rattling Arne 4/4/05

Re: how to detect speaker rattling/fan rattling Arne 4/4/05

Re: how to detect speaker rattling/fan rattling 4/5/05

Re: how to detect speaker rattling/fan rattling Rodjer 4/6/05

Re: how to detect speaker rattling/fan rattling Arne 4/5/05

Re: how to detect speaker rattling/fan rattling Phil 4/29/05

Motor bearing life Gevenag 4/3/05

Re: Motor bearing life arie mol, NL 4/9/05

Re: Motor bearing life lawrencep 4/4/05

Re: Motor bearing life Arne 4/4/05

Re: Motor bearing life Thomas Kurian 4/5/05

Motor solo run Gevenag 4/3/05

Re: Motor solo run 4/10/05

Re: Motor solo run 4/10/05

Re: Motor solo run 4/10/05

Re: Motor solo run 4/10/05

Re: Motor solo run Arne 4/4/05

Re: Motor solo run viki 4/4/05

Re: Motor solo run vibrant 4/5/05

DIESEL ENGINE SPECTRUM TARIQ hafiz_tariq@yahoo.com 4/3/05

Re: DIESEL ENGINE SPECTRUM Arne 4/3/05

Re: DIESEL ENGINE SPECTRUM Sumit 4/7/05

Re: DIESEL ENGINE SPECTRUM TARIQ 4/5/05

Re: DIESEL ENGINE SPECTRUM Shane 5/6/05

Category II Exam - prerequisite Steve C. 4/2/05

Re: Category II Exam - prerequisite Kiran Toram 4/3/05

Re: Category II Exam - prerequisite Greg M. 4/7/05

Greg.... Steve C. 4/8/05

Re: Category II Exam - prerequisite Greg... 4/8/05

Kiran, another question.. Steve C. 4/3/05

Re: Kiran, another question.. Kiran Toram 4/4/05

Screen Vibration Dom 4/1/05

Re: Screen Vibration Arne 4/1/05

Re: Screen Vibration 4/21/05

Questions to enlighten your routines Arne 4/1/05

Re: Questions to enlighten your routines Sumit 4/7/05

Re: Questions to enlighten your routines Arne 4/10/05

Arne Craig H 3/31/05

Re: Arne Arne 4/1/05

Re: Arne Craig H 4/1/05

Newspaper printers reggab2001Yahoo.com 3/31/05

Magnetic Couplings Rob 3/31/05

Re: Magnetic Couplings rob - Techno Fysica 4/19/05

Re: Magnetic Couplings arie mol, NL 4/1/05

Re: Magnetic Couplings Arne 4/1/05

Peak Amplitude in axial direction of centrifugal pump jonos (electrical@styrindo.co.id) 3/30/05

Re: Peak Amplitude in axial direction of centrifugal pump 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump Jim P 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump Jim P 4/4/05

Re: Peak Amplitude in axial direction of centrifugal pump jonos 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump Arne 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump J-Marc 3/31/05

Re: Peak Amplitude in axial direction of centrifugal pump Arne 3/31/05

Wanted Interested 3/30/05

Re: Wanted Dave G. www.reliabilitydirect.com 3/30/05

IMPACT TEST SAH 3/30/05

Re: IMPACT TEST Eduardo Murphy 3/31/05

Re: IMPACT TEST Arne 3/30/05

Re: IMPACT TEST SAH 3/30/05

Re: IMPACT TEST Arne 3/31/05

Re: IMPACT TEST MachineryWatch 3/30/05

Re: IMPACT TEST MachineryWatch 3/30/05

CSI 2120-2 for sale DavL 3/29/05

airport runway LF ground vibrations arie mol, NL 3/29/05

Re: airport runway LF ground vibrations ron hartlen 4/4/05

Re: airport runway LF ground vibrations arie mol, NL 4/9/05

Re: airport runway LF ground vibrations Gerard 4/20/05

Re: airport runway LF ground vibrations Gerard 3/30/05

Re: airport runway LF ground vibrations Steven Schultheis 3/31/05

Re: airport runway LF ground vibrations Gerard 3/31/05

Re: airport runway LF ground vibrations Arne 3/29/05

Re: airport runway LF ground vibrations ron hartlen 3/29/05

Impeller Position relative to volute Behar 3/29/05

Re: Impeller Position relative to volute Thomas Kurian 3/30/05

Re: Impeller Position relative to volute Arne 3/29/05

Questions about Machine Diagnostics for a master thesis Lone G. Arnholtz, student at Copenhagen Business School 3/29/05

Re: Questions about Machine Diagnostics for a master thesis Alan F 3/30/05

Re: Questions about Machine Diagnostics for a master thesis Duncan Carter 3/29/05

Re: Questions about Machine Diagnostics for a master thesis Steven Schultheis 3/29/05

Odd frequency in vertically mounted motor Drew 3/29/05

Re: Odd frequency in vertically mounted motor rudi1@mts.net 3/29/05

Re: Odd frequency in vertically mounted motor MachineryWatch 3/29/05

Re: Odd frequency in vertically mounted motor Drew 3/29/05

Vibration in TDBFP Subramanyakumar@ntpc.co.in 3/29/05

Re: Vibration in TDBFP Steve Schultheis 3/29/05

Re: Vibration in TDBFP 3/30/05

Cardan Shaft bearing vibrations Mark D 3/28/05

Re: Cardan Shaft bearing vibrations Arne 3/28/05

Re: Cardan Shaft bearing vibrations Alec 3/28/05

Re: Cardan Shaft bearing vibrations Arne 3/28/05

VIBRO PORT 30 SCHENK BALANCING MACHINE rudi1@mts.net 3/28/05

VIBRO PORT 30 SCHENK BALANCING MACHINE rudi1@mts.net 3/28/05

VIBRO PORT 30 SCHENK BALANCING MACHINE rudi1@mts.net 3/28/05

Sidebands and Natural Frequency Mike 3/25/05

Re: Sidebands and Natural Frequency Arne 3/25/05

Sidebands and Natural Frequency Mike 3/25/05

Re: Sidebands and Natural Frequency 3/28/05

Dear anonymus Arne 3/29/05

Vertical motor 1x vibration increases with voltage.help! Todd W. Branch 3/24/05

Re: Vertical motor 1x vibration increases with voltage.help! Dave Ditchfield 4/1/05

We need your help, Todd, so we can help you: Arne 3/24/05

Re: We need your help, Todd, so we can help you: Todd 3/24/05

Re: We need your help, Todd, so we can help you: arie mol, NL 3/24/05

Balancing of rotors and inertial mechanics. JU.Zhivotov 3/24/05

Arne I now have almost every 7200 Monitor Bently made Craig H 3/23/05

Re: Arne I now have almost every 7200 Monitor Bently made Arne 3/24/05

Problem: 1x increase with voltage, not rpm... help Todd W. Branch 3/23/05

Re: Problem: 1x increase with voltage, not rpm... help arie mol, NL 3/23/05

Re: Problem: 1x increase with voltage, not rpm... help Mark 3/23/05

Re: Problem: 1x increase with voltage, not rpm... help Eduardo Murphy 3/23/05

Re: Problem: 1x increase with voltage, not rpm... help Arne 3/23/05

1x vibration increases with voltage increase Todd W. Branch 3/23/05

1x vibration increases with voltage increase Todd W. Branch 3/23/05

1x vibration increases with voltage increase Todd W. Branch 3/23/05

high speed shaft sheared (knife cutting) aali@midom.com.eg 3/22/05

Or: How to shear a shaft running on critical speed Arne 3/22/05

Re: Or: How to shear a shaft running on critical speed Shawn 3/22/05

Re: Or: How to shear a shaft running on critical speed arie mol, NL 3/24/05

Re: Or: How to shear a shaft running on critical speed Gerard 3/22/05

Re: Or: How to shear a shaft running on critical speed Arne 3/22/05

Re: Or: How to shear a shaft running on critical speed Thomas Kurian 3/22/05

Re: Or: How to shear a shaft running on critical speed Arne 3/23/05

Re: Or: How to shear a shaft running on critical speed Mark D 4/14/05

Re: Or: How to shear a shaft running on critical speed Thomas Kurian 3/23/05

Fan Shaft Wear RGF 3/21/05

Re: Fan Shaft Wear RGF 3/29/05

Re: Fan Shaft Wear andy 4/7/05

Re: Fan Shaft Wear Cluffy 3/28/05

Re: Fan Shaft Wear Arne 3/21/05

Integral Gearbox Centrifugal Blower Mike Jones - Dominion Generation 3/21/05

Re: Integral Gearbox Centrifugal Blower arie mol, NL 3/21/05

Re: Integral Gearbox Centrifugal Blower MachineryWatch 3/21/05

8MB SRAM Card for CSI 2120 Analyzer taher@computersndconcepts.com 3/18/05

Re: 8MB SRAM Card for CSI 2120 Analyzer Joe Gurney 3/19/05

*MB SRAM Card for CSI 2120 Analyzer taher@computersndconcepts.com 3/18/05

Alert and Fault levels for parameters Vibrant 3/18/05

Re: Alert and Fault levels for parameters Arne 3/18/05

Re: Alert and Fault levels for parameters vibrant 3/19/05

Re: Alert and Fault levels for parameters Arne and mail from Jens K. 3/20/05

Re: Alert and Fault levels for parameters Arne 3/20/05

Re: Alert and Fault levels for parameters vibrant 3/20/05

Re: Alert and Fault levels for parameters Arne 3/20/05

Re: Alert and Fault levels for parameters Thomas Kurian 3/21/05

Re: Alert and Fault levels for parameters Thomas Kurian 3/21/05

Re: Alert and Fault levels for parameters Arne 3/21/05

Re: Alert and Fault levels for parameters MachineryWatch 3/21/05

Competitors to BRAUN or JAQUET? John 3/18/05

Re: Competitors to BRAUN or JAQUET? steve.davies@dei-ltd.co.uk 3/30/05

Re: Competitors to BRAUN or JAQUET? steve.davies@dei-ltd.co.uk 3/30/05

Re: Competitors to BRAUN or JAQUET? 3/30/05

Re: Competitors to BRAUN or JAQUET? Dave G. www.reliabilitydirect.com 3/19/05

Re: Competitors to BRAUN or JAQUET? 3/18/05

Re: Competitors to BRAUN or JAQUET? John 3/28/05

Re: Competitors to BRAUN or JAQUET? John 3/28/05

Vibration analysis in Textile Industry vibrant 3/17/05

Re: Vibration analysis in Textile Industry Arne 3/17/05

Re: Vibration analysis in Textile Industry arie mol, NL 3/18/05

Lomakin Effect & spiralled grooved impeller rings Mahabs 3/17/05

Re: Lomakin Effect & spiralled grooved impeller rings Hunter 3/17/05

Discussion Zone in Spanish Ciro Martinez 3/17/05

Re: Discussion Zone in Spanish Arne 3/17/05

Re: Discussion Zone in Spanish Ciro 3/17/05

Re: Discussion Zone in Spanish vibrotec@amauta.rcp.net.pe 3/17/05

off-topic help wanted oakbas@superonline.com 3/17/05

Lubrication of Swing Gear (open gear) darmawan@conocophillips.com 3/16/05

Unexpected decrease in waveform levels VIMMAN 3/16/05

Re: Unexpected decrease in waveform levels shawn 3/16/05

Re: Unexpected decrease in waveform levels Duncan Carter 3/16/05

parameter setting vibrant 3/16/05

Re: parameter setting vibrant 3/16/05

Re: parameter setting vibrant 3/16/05

Rotor Bar Pass Freq. Sidebands RayG 3/16/05

Re: Rotor Bar Pass Freq. Sidebands arie mol, NL 3/16/05

Re: Rotor Bar Pass Freq. Sidebands Dave 3/16/05

Re: Rotor Bar Pass Freq. Sidebands arie mol, NL 3/17/05

Re: Rotor Bar Pass Freq. Sidebands MachineryWatch 3/16/05

Re: Rotor Bar Pass Freq. Sidebands RAYG 3/16/05

Re: Rotor Bar Pass Freq. Sidebands MachineryWatch 3/16/05

Re: Rotor Bar Pass Freq. Sidebands Shawn 3/16/05

Re: Rotor Bar Pass Freq. Sidebands vibrant 3/16/05

Re: Rotor Bar Pass Freq. Sidebands RayG 3/16/05

Re: Rotor Bar Pass Freq. Sidebands Steve 3/16/05

Re: Rotor Bar Pass Freq. Sidebands RAYG 3/16/05

Re: Rotor Bar Pass Freq. Sidebands Jim P 4/28/05

Re: Rotor Bar Pass Freq. Sidebands Steve 3/17/05

Instrumentation for vibration analysis Thomas Kurian 3/14/05

Re: Instrumentation for vibration analysis Safety monitor or diagnostic tools? 3/14/05

Re: Instrumentation for vibration analysis Thomas Kurian 3/15/05

Re: Instrumentation for vibration analysis Shawn 3/16/05

Re: Instrumentation for vibration analysis Shawn 3/15/05

Re: Instrumentation for vibration analysis Shawn 3/15/05

In My Honest Opinion Arne 3/15/05

Re: Instrumentation for vibration analysis Shawn 3/14/05

High Speed Blowers Maximum vibration limit mnraja@se.com.sa 3/14/05

Re: High Speed Blowers Maximum vibration limit Arne 3/14/05

Re: High Speed Blowers Maximum vibration limit Moe 3/14/05

Re: High Speed Blowers Maximum vibration limit Thomas Kurian 3/14/05

Bently/GE-Help Me Link Craig Hundley 3/12/05

Re: Bently/GE-Help Me Link 3/12/05

how detect key wear for rotational machines ? zzlinks@hotmail.com 3/11/05

Re: how detect key wear for rotational machines ? Don P 3/15/05

Re: how detect key wear for rotational machines ? Steve 3/15/05

Re: how detect key wear for rotational machines ? vibrant 3/14/05

Re: how detect key wear for rotational machines ? 3/11/05

Re: how detect key wear for rotational machines ? zzlinks@hotmail.com 3/12/05

Re: how detect key wear for rotational machines ? Arne 3/12/05

Re: how detect key wear for rotational machines ? vibeguy 3/12/05

Re: how detect key wear for rotational machines ? Arne 3/13/05

Re: how detect key wear for rotational machines ? vibeguy 3/13/05

Any kits available for rent to measure Natural Frequency? NewVibeMan 3/10/05

Re: Any kits available for rent to measure Natural Frequency? Tom Irvine, tomirvine@aol.com 3/23/05

Re: Any kits available for rent to measure Natural Frequency? 3/11/05

2800KW motor AAC 3/9/05

Re: 2800KW motor Arne 3/9/05

Gse Measurments Keith 3/7/05

Re: Gse Measurments vibrant 3/8/05

Re: Gse Measurments Mike 3/7/05

Gears Vibration Problem Mike 3/6/05

Re: Gears Vibration Problem Arne 3/6/05

Re: Gears Vibration Problem Mike 3/6/05

Re: Gears Vibration Problem 3/6/05

Re: Gears Vibration Problem Arne 3/7/05

Submersible Pumps Hector hectorluque@hotmail.com 3/4/05

Re: Submersible Pumps Arne 3/5/05

Re: Submersible Pumps Hector 3/8/05

Re: Submersible Pumps Arne 3/9/05

Fun pics "VM for dummies" Andy @ Tutrin.com 3/4/05

Root blowers ACC Plant 3/4/05

Re: Root blowers MachineryWatch 3/4/05

Re: Root blowers shawn 3/4/05

Article 7789 3/4/05

Employment Opportunity KSL Recruiting LLC 3/3/05

How to distinguish cavitation and rolling element bearing damage in pumps. prasada.rao@gasco.ae 3/3/05

Re: How to distinguish cavitation and rolling element bearing dam... Alan F 3/4/05

Re: How to distinguish cavitation and rolling element bearing dam... shawn 3/3/05

Re: How to distinguish cavitation and rolling element bearing... prasada.rao@gasco.ae 3/4/05

Re: How to distinguish cavitation and rolling element bearing... shawn 3/4/05

How to distinguish cavitation and rolling element bearing damage in pumps. 3/3/05

RCM mahabs 3/2/05

Re: RCM 3/6/05

Re: RCM mahabs 3/7/05

Re: RCM Mike 3/7/05

spare pump philosophy mahabs 3/2/05

Re: spare pump philosophy Gerard 3/2/05

Re: spare pump philosophy Thomas Kurian 3/3/05

Re: spare pump philosophy shawn 3/3/05

SCR Firing Freq in across-the-line motors? Dave A. 3/1/05

Re: SCR Firing Freq in across-the-line motors? Eduardo Murphy 3/2/05

low speed machinery vibration akhil agarwal ad1969@rediffmail.com 2/28/05

Re: low speed machinery vibration MachineryWatch 3/1/05

Re: low speed machinery vibration deshpandevishal@indiatimes.com 3/1/05

Re: low speed machinery vibration vibrant 3/1/05

IRD 890 battery tension Depauws 2/28/05

1X VIBRATION AND IMPACT ENERGY SAH 2/28/05

Re: 1X VIBRATION AND IMPACT ENERGY arie mol 2/28/05

Re: 1X VIBRATION AND IMPACT ENERGY 3/1/05

Hot and Cold Alignment Guest 2/27/05

Re: Hot and Cold Alignment Jim P 3/1/05

Re: Hot and Cold Alignment Thomas Kurian 2/28/05

FOR SALE ENTEK IRD DATAPAC 1500 with accessorier slicata@bex.net 2/26/05

FOR SALE ENTEK IRD DATAPAC 1500 with accessorier Slicata@bex.net 2/26/05

Atlas Copco Compressor Details T.Peacock 2/25/05

Re: Atlas Copco Compressor Details Hao 2/27/05

Proactive Maintenance Syed Nasir Ali Naqvi 2/25/05

Re: Proactive Maintenance Rob 3/9/05

Re: Proactive Maintenance Thomas Kurian 2/27/05

Re: Proactive Maintenance Arne 2/25/05

Re: Proactive Maintenance shawn 2/25/05

Re: Proactive Maintenance Arne 2/25/05

Re: Proactive Maintenance Syed Nasir Ali Naqvi 2/26/05

Re: Proactive Maintenance Arne 2/26/05

Aura Power Shakers/ Transducers/Active Vibration Testing oshea4@mindspring.com 2/24/05

Good Good Good Good Vibrations Keith Bluestein 2/23/05

Re: Good Good Good Good Vibrations Guest 2/24/05

Alignment question Mike 2/23/05

Re: Alignment question Shawn 2/23/05

Business Opportunity - Vibration Monitoring Services Ramdas (admin@sherman-india.com) 2/23/05

Re: Business Opportunity - Vibration Monitoring Services Craig 3/12/05

Re: Business Opportunity - Vibration Monitoring Services Craig 3/12/05

Re: Business Opportunity - Vibration Monitoring Services Hao 2/25/05

Re: Business Opportunity - Vibration Monitoring Services Keith Bluestein 2/23/05

EDM on bearings Dave 2/22/05

Re: EDM on bearings Arne 2/26/05

Missing 1X frequency in spectrum David 2/22/05

Re: Missing 1X frequency in spectrum Alan F 2/24/05

Re: Missing 1X frequency in spectrum Alan F 2/24/05

Re: Missing 1X frequency in spectrum David 2/27/05

Re: Missing 1X frequency in spectrum arie mol 2/28/05

Bearing Freq Keith 2/22/05

lease 2120 BBender 2/22/05

Re: lease 2120 Arne 2/23/05

Re: lease 2120 2/23/05

BALANCING EQUIPMENT rudi1@mts.net 2/22/05

BALANCING EQUIPMENT rudi1@mts.net 2/22/05

BALANCING EQUIPMENT rudi1@mts.net 2/22/05

relocated Reliability magazine ABV forum Duncan Carter 2/21/05

Re: relocated Reliability magazine ABV forum update Duncan Carter 2/21/05

Re: relocated Reliability magazine ABV forum update oops 2/21/05

Re: relocated Reliability magazine ABV forum Walt Strong 2/21/05

Meaningful Vibration Alarming RBagley 2/21/05

Re: Meaningful Vibration Alarming Alan F 2/24/05

Meaningful Vibration Alarming RBagley 2/21/05

Re: Meaningful Vibration Alarming shawn 2/22/05

Re: Meaningful Vibration Alarming robert 2/22/05

Re: Meaningful Vibration Alarming shawn 2/23/05

174-PH Grade Steel Dave A. 2/20/05

Re: 174-PH Grade Steel Steve Schultheis 2/21/05

Re: 174-PH Grade Steel Jim P 2/22/05

Re: 174-PH Grade Steel Steve Schultheis 2/24/05

Re: 174-PH Grade Steel DA 2/24/05

174-PH Grade Steel Dave A. 2/20/05

Virtual study group for Category IV exam Michael Titone 2/20/05

Re: Virtual study group for Category IV exam Mike 2/23/05

Re: Virtual study group for Category IV exam Michael Titone 2/24/05

Bearing Failure Gavin Adam 2/18/05

Re: Bearing Failure J-Marc 2/21/05

Re: Bearing Failure J-Marc 2/21/05

Re: Bearing Failure Dave G. www.reliabilitydirect.com 2/20/05

Re: Bearing Failure Steve 2/20/05

Re: Bearing Failure Arne 2/18/05

rotor stability mahabs 2/18/05

Re: rotor stability Arne 2/18/05

locked coupling vibes 2/17/05

Re: locked coupling vijay bansal 5/5/05

Re: locked coupling Walt 2/17/05

Max Temp Jon 2/17/05

Vee Notching behar 2/17/05

Re: Vee Notching Walt 2/17/05

Predictive Maintenance software User Interfaces, Good Design / Bad Design? Mr. Philip Higgs 2/17/05

Bently 7200's Craig Hundley 2/16/05

Rotor Stability behar 2/16/05

Re: Rotor Stability Arne 2/17/05

Re: Rotor Stability mahabs 2/18/05

Vee Notching behar 2/16/05

Re: Vee Notching Walt 2/16/05

Re: Vee Notching behar 2/17/05

Re: Vee Notching Walt 2/17/05

Re: Vee Notching Arne 2/17/05

Re: Vee Notching shawn 2/17/05

INDUSTRY BEST PRACTICE FOR CM GROUP MAHABS 2/16/05

PERSONNEL FOR VIBRATION GROUP MAHABS 2/16/05

Re:Personell for CBM group Arne 2/17/05

OPERATORS TAKING DAILY VIBRATION READINGS MAHABS 2/16/05

Re: Operators taking readings daily Arne 2/17/05

Re: OPERATORS TAKING DAILY VIBRATION READINGS Arne 2/17/05

Re: OPERATORS TAKING DAILY VIBRATION READINGS 2/16/05

4X vibration peak on mill motor B Bender 2/16/05

Re: 4X vibration peak on mill motor Alan F 2/17/05

Re: 4X vibration peak on mill motor B Bender 2/18/05

Re: 4X vibration peak on mill motor B Bender 2/18/05

Vibration changes from temperature change Dave C. 2/15/05

Vibration Dampening Factors Eric Grimes 2/15/05

Pumpkin Head matt_manwiller@ifmefector.com 2/14/05

2130 Tach Cable Mohd Arif, Petronas Malaysia 2/13/05

Re: 2130 Tach Cable Manoj Chandrasekharan 2/14/05

6 pole alternator sincgle bearing vibration Larry 2/11/05

Re: 6 pole alternator sincgle bearing vibration Dana 3/3/05

Re: 6 pole alternator sincgle bearing vibration Dana 3/3/05

Re: 6 pole alternator sincgle bearing vibration Arne 2/13/05

Re: 6 pole alternator sincgle bearing vibration Eduardo Murphy 2/12/05

Infrared and Vibration Analysis Keith 2/11/05

Re: Infrared and Vibration Analysis Rich Wurzbach, Maintenance Reliability Group 2/12/05

Centrifugal Compressor - startup Jose 2/11/05

Re: Centrifugal Compressor - startup Thomas Kurian 2/13/05

Re: Centrifugal Compressor - startup Thomas Kurian 2/22/05

Re: Centrifugal Compressor - startup Eduardo Murphy 2/12/05

Re: Centrifugal Compressor - startup vc 2/11/05

Re: Centrifugal Compressor - startup Alex J 2/14/05

RCM Consultant Florian Walchak - TRAX International 2/10/05

Re: RCM Consultant Dave G., www.reliabilitydirect.com 2/10/05

Re: RCM Consultant Florian Walchak 2/12/05

v/w/finger phil 2/9/05

Re: v/w/finger Walt 2/9/05

Magnetic Center Jon 2/9/05

Re: Magnetic Center Shawn 2/10/05

Re: Magnetic Center Ron Stiemsma 2/15/05

Re: Magnetic Center Jon 2/11/05

Re: Magnetic Center arie mol, nl 2/11/05

Re: Magnetic Center Shawn 2/11/05

Re: Magnetic Center Viki 2/10/05

Re: Magnetic Center Eduardo Murphy 2/9/05

Re: Magnetic Center Walt 2/9/05

Vibration Analyzer smoothshaker 2/9/05

Vibration Analyzer smoothshaker 2/9/05

Vibration Monitoring Mark Buckingham 2/9/05

Fan balancing Bill 2/8/05

Re: Fan balancing Dennis Swanepoel 2/18/05

Taking Mils Readings Keith 2/8/05

Re: Taking Mils Readings Steve 2/14/05

interested in ird 880 and a balancer machine used carlos_luna14@yahoo.com.mx 2/8/05

Re: interested in ird 880 and a balancer machine used richgrounds@magnetech.com 2/9/05

Re: interested in ird 880 and a balancer machine used Eduardo Murphy 2/8/05

Re: interested in ird 880 and a balancer machine used Dave G. www.reliabilitydirect.com 2/8/05

Vibration change with load at constant speed. Thomas Kurian 2/6/05

Re: Vibration change with load at constant speed. Viki 2/6/05

Re: Vibration change with load at constant speed. MachineryWatch 2/6/05

Re: Vibration change with load at constant speed. Thomas Kurian 2/8/05

Re: Vibration change with load at constant speed. 2/8/05

20Hz in a Velocity spectrum Mario 2/5/05

Re: 20Hz in a Velocity spectrum Arne 2/5/05

Re: 20Hz in a Velocity spectrum arie mol, nl 2/6/05

Re: 20Hz in a Velocity spectrum Mario 2/6/05

vibration@hotPOP.com Sorry vibration@hotPOP.com 2/5/05

Re: vibration@hotPOP.com 2/9/05

propeller shaft testing rig --design and development rkceg@yahoo.co.in 2/4/05

Roots blowers Neil Clough 2/2/05

Re: Roots blowers Thomas Kurian 2/3/05

Re: Roots blowers_Additional Thomas Kurian 2/3/05

IRD 885 Software Trimetric Engineering 2/2/05

IRD 885 Software Trimetric Engineering 2/2/05

IRD 885 Software 2/2/05

Questions on Vib. Software abbottjim 2/2/05

ROTALIGN PRO - Shaft alignment system for sale !!! JCTERMO 2/1/05

Re: ROTALIGN PRO - Shaft alignment system for sale !!! JRI 3/23/05

Bearing Defect Frequency Syed Nasir Ali Naqvi 1/31/05

Re: Bearing Defect Frequency Dennis Swanepoel 2/2/05

Re: Bearing Defect Frequency motaz1st@hotmail.com 2/9/05

Re: Bearing Defect Frequency 2/1/05

Re: Bearing Defect Frequency Arne 2/3/05

VPF Harmonics Lu 1/31/05

Re: VPF Harmonics MachineryWatch 2/1/05

Sample Reports Joseph 1/31/05

AC motor Axial vibrations at 0,5 x rpm and 0.75 rpm Gajus 1/31/05

Re: AC motor Axial vibrations at 0,5 x rpm and 0.75 rpm arie mol. NL 1/31/05

Re: AC motor Axial vibrations at 0,5 x rpm and 0.75 rpm Gajus 2/1/05

AC motor Axial vibrations at 0,4 x rpm Gajus 1/31/05

plane searation smhcf6@hotmail.com 1/30/05

Re: plane separation Arne 2/3/05

10Hz vibration kooichong-malysia 1/30/05

Re: 10Hz vibration steve 1/31/05

Re: 10Hz vibration 2/1/05

Re: 10Hz vibration kooichong 1/31/05

mil smhcf6@hotmail.com 1/30/05

Re: mil Arne 1/30/05

Career opportunity – Vibration Specialist HR Consultant 1/29/05

Re: Career opportunity – Vibration Specialist 2/2/05

OOPS vibration@hotPOP.com vibration@hotPOP.com 2/5/05

Re: Career opportunity – Vibration Specialist 2/2/05

Career opportunity – Vibration Specialist HR Consultant 1/29/05

Article 7552 1/29/05

Re: Article 7552 2/2/05

Re: Article 7552 2/2/05

Re: Article 7552 2/2/05

Career opportunity – Vibration Specialist HR Consultant 1/29/05

Re: Career opportunity – Vibration Specialist 2/2/05

Helicopter rotor balancing instrument jmarkwolf@yahoo.com 1/28/05

Re: Helicopter rotor balancing instrument 3/13/05

Re: Helicopter rotor balancing instrument Dave G. www.reliabilitydirect.com 1/28/05

Vib Training -Large Steam Turbine/Generators Dave G 1/28/05

Re: Vib Training -Large Steam Turbine/Generators 2/2/05

Re: Vib Training -Large Steam Turbine/Generators CMD Global 1/30/05

Re: Vib Training -Large Steam Turbine/Generators CMD Global 1/30/05

Re: Vib Training -Large Steam Turbine/Generators CMD Global 1/30/05

Re: Vib Training -Large Steam Turbine/Generators CMD Global 1/30/05

Hydrolic system in mixing equipment sy_kwon@ap.irco.com 1/28/05

VIBRATION MONITORING SYSTEMS [ON-LINE] Dr Ken , jjamvant@yahoo.com 1/28/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] Javier Murcia - SKF Colombia 4/20/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] 4/20/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] william carrillo 3/7/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] 3/1/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] zzlinks@hotmail.com 2/24/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] b.salomon@epro.de 2/11/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] Ken 2/14/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] Mike 2/4/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] Ken 2/8/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] 2/9/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] guest 1/31/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] Dave G. www.reliabilitydirect.com 1/28/05

Re: VIBRATION MONITORING SYSTEMS [ON-LINE] vibratek@vibratek.com.tr 1/28/05

API Between bearing, double suction pump vibration problem jli@cpcpumps.com 1/26/05

Re: API Between bearing, double suction pump vibration problem Viki 1/27/05

Re: API Between bearing, double suction pump vibration problem SAH 1/26/05

aceleration levels chart iecingenieria4@hotmail.com 1/26/05

Re: aceleration levels chart Arne 1/26/05

Re: aceleration levels chart wgarcia62@hotmail.com 3/3/05

instruction for BENTLY NEVADA 3500 czvi@iec.co.il 1/26/05

Re: instruction for BENTLY NEVADA 3500 1/26/05

CSI 2120 Vendo parrahugo@hotmail.com 1/25/05

very slow speed gear boxes Craig 1/25/05

Re: very slow speed gear boxes 2/9/05

Re: very slow speed gear boxes Arne 1/25/05

Re: very slow speed gear boxes Craig 1/25/05

Re: very slow speed gear boxes Jim Crowe 1/27/05

Re: very slow speed gear boxes Craig 1/27/05

Motor amplitude pulses @7200 (peakvue) & repeat Stan 1/24/05

Motor amplitude pulses @7200 (peakvue) & repeat Stan 1/24/05

Re: Motor amplitude pulses @7200 (peakvue) & repeat David Eason 1/25/05

Re: Motor amplitude pulses @7200 (peakvue) & repeat Stan 1/25/05

Re: Motor amplitude pulses @7200 (peakvue) & repeat Arne 1/24/05

Fast track - stand alone or PM Power only? Colin 1/23/05

alancing 1/23/05

Re: alancing Arne 1/23/05

Daniel Bravo Brad Bender 1/21/05

Daniel Bravo 1/21/05

Daniel Bravo 1/21/05

Daniel Bravo 1/21/05

Daniel Bravo 1/21/05

Article 7508 Brad Bender 1/21/05

Frequency component - generator M.&L. 1/21/05

Re: Frequency component - generator Walt 1/21/05

Re: Frequency component - generator Arne 1/21/05

Torsional Vibration - Instrument Ciro - vibrotec@amauta.rcp.net.pe 1/20/05

Re: Torsional Vibration - Instrument rmooij at technofysica.nl 2/3/05

Re: Torsional Vibration - Instrument Thomas Kurian 1/26/05

Re: Torsional Vibration - Instrument arie mol, NL 1/23/05

Re: Torsional Vibration - Instrument Walt 1/21/05

Re: Torsional Vibration - Instrument Arne 1/21/05

Re: Torsional Vibration - Instrument MachineryWatch 1/20/05

Gear Pump Peter 1/20/05

Re: Gear Pump Arne 1/20/05

Natural Frequency of Cantilever Beam with Mass Helen 1/20/05

Re: Natural Frequency of Cantilever Beam with Mass Ravi Putrevu 4/21/05

Re: Natural Frequency of Cantilever Beam with Mass Sumit 4/20/05

Re: Natural Frequency of Cantilever Beam with Mass Arne 1/20/05

trial weight smhcf6@hotmail.com 1/20/05

trial weight for calibration smhcf6@hotmail.com 1/20/05

trial weight for calibration smhcf6@hotmail.com 1/20/05

trial weight for calibration smhcf6@hotmail.com 1/20/05

trial weight or calibration smhcf6@hotmail.com 1/20/05

balancing method smhcf6@hotmail.com 1/20/05

Re: balancing method Alec 1/21/05

AFBMA code in CSI data base Shameer 1/19/05

Re: AFBMA code in CSI data base Arne 1/19/05

2120 lease Brad Bender 1/18/05

2120 lease Brad Bender 1/18/05

Re: 2120 lease Arne 1/18/05

2120 rental, lease, or purchase 1/18/05

2120 rental, lease, or purchase 1/18/05

2120 rental, lease, or purchase 1/18/05

vibration on a motor generator set rick 1/18/05

Re: vibration on a motor generator set Rick 1/20/05

Re: vibration on a motor generator set arie mol, NL 1/20/05

Re: vibration on a motor generator set arie mol, NL 1/19/05

Re: vibration on a motor generator set Arne 1/18/05

Pump Curves mill 1/18/05

Re: Pump Curves Thomas Kurian 1/18/05

Re: Pump Curves Viki 1/18/05

Re: Pump Curves behar 2/14/05

schenck analyzer and balancing machine rudi engel rudi1@mts.net 1/17/05

Re: schenck analyzer and balancing machine Emmanuel Fiati (efiati@anglogoldashanti.com.gh ) 3/26/05

Conversion from FPM to RPM sam scott 1/16/05

Re: Conversion from FPM to RPM Eduardo Murphy 1/17/05

Re: Conversion from FPM to RPM Arne 1/17/05

Trying to find out how many inches is 6.2mm?? amievaz@aol.com 1/16/05

Trying to find out how many inches is 6.2mm?? Amie 1/16/05

Re: Trying to find out how many inches is 6.2mm?? Arne 1/16/05

Moving Machinery vibration Lu 1/16/05

DESIGN REQUEST MAIGNANAMOORTHY_K@YAHOO.COM 1/16/05

HT MOTOR BEARING HAS ERRATIC TEMP. CHANGE rugvedkj@rediffmail.com 1/15/05

Re: HT MOTOR BEARING HAS ERRATIC TEMP. CHANGE Viki 1/16/05

Re: HT MOTOR BEARING HAS ERRATIC TEMP. CHANGE Steve 1/15/05

Mechanalysis IRD 818 andyburge2002@yahoo.com 1/14/05

Re: Mechanalysis IRD 818 Dave G. www.reliabilitydirect.com 1/15/05

recommended course for Cat. III roy gariepy 1/14/05

Article 7449 1/14/05

New Modeling Vibration Softwares Mike 1/12/05

Spectrum from axial thrust probe Viki 1/11/05

Re: Spectrum from axial thrust probe William C. Foiles 1/14/05

Re: Spectrum from axial thrust probe Steven Schultheis 1/13/05

Re: Spectrum from axial thrust probe Arne 1/12/05

impact test Lu 1/11/05

Re: impact test Leo 1/12/05

Number of Averages Hector 1/10/05

Re: Number of Averages MachineryWatch 1/11/05

Re: Number of Averages Arne 1/11/05

Re: Number of Averages 1/11/05

Two Shafts Gas Turbine Yal 1/10/05

Re: Two Shafts Gas Turbine Arne 1/10/05

Re: Two Shafts Gas Turbine Yal 1/12/05

Re: Two Shafts Gas Turbine Arne 1/12/05

Simple Reports Keith 1/8/05

Re: Simple Reports MM 1/16/05

Re: Simple Reports 1/16/05

Re: Simple Reports Steve 1/11/05

Re: Simple Reports Joseph 1/18/05

Re: Simple Reports Keith 1/12/05

Re: Simple Reports Chip Frailey 1/13/05

Re: Simple Reports 1/11/05

Re: Simple Reports Yal 1/12/05

Re: Simple Reports Jesús Ignacio 1/13/05

what is the difference between threshold speed and critical speed rkceg@yahoo.co.in 1/8/05

Re: what is the difference between threshold speed and critical s... Steven Schultheis 1/13/05

Re: what is the difference between threshold speed and critical s... Kiran Toram 1/9/05

threshold speed 2/10/05

Re: what is the difference between threshold speed and critic... rkceg@yahoo.co.in 2/4/05

Re: what is the difference between threshold speed and critic... Arne 1/10/05

Re: what is the difference between threshold speed and critic... Kiran Toram 1/11/05

Re: what is the difference between threshold speed and critic... rkceg@yahoo.co.in 2/4/05

Re: what is the difference between threshold speed and critic... 2/4/05

Re: what is the difference between threshold speed and critic... Thomas Kurian 1/17/05

Basics: Bearing Failure Modes Haytham 1/8/05

Re: Basics: Bearing Failure Modes Dave G. 1/8/05

High slot frequency on AC motor dnk 1/7/05

rewinding small carbon brush armeture - Arne wafa12@yahoo.com 1/7/05

Re: rewinding small carbon brush armeture - Arne wafa 4/22/05

Re: rewinding small carbon brush armeture - Arne Arne 1/7/05

Subsyncronous frecuencies Hector 1/6/05

Re: Subsyncronous frecuencies Steve Schultheis 1/13/05

Re: Subsyncronous frecuencies MachineryWatch 1/6/05

Vibration Training and Meter Recommendation Rick Robinson 1/6/05

Re: Vibration Training and Meter Recommendation Dave Gallagher 1/8/05

Vibration Training Rick Robinson 1/6/05

Re: Vibration Training Gary Peterson 1/9/05

Two Plane, Multi-Speed Balance Equations mattgadella@prodigy.net 1/5/05

PCMCIA FOR DATAPAC RHW2ND@IDSSPROACTIVE.COM 1/5/05

Re: PCMCIA FOR DATAPAC Dana 1/22/05

Re: PCMCIA FOR DATAPAC dnk 1/7/05

Intermittent Modulating 1X vibration on Gas Compressor Kevin 1/5/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Tim Blockinger 1/14/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Kevin 1/15/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Svend 1/8/05

Re: Intermittent Modulating 1X vibration on Gas Compressor MachineryWatch 1/6/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Steve Schultheis 1/5/05

Re: Intermittent Modulating 1X vibration on Gas Compressor SAH 1/6/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Arne 1/5/05

Re: Intermittent Modulating 1X vibration on Gas Compressor Kevin 1/7/05

Re: Intermittent Modulating 1X vibration on Gas Compressor mvc 1/8/05

0.15X vibration on a gascompressor Svend 1/4/05

Re: 0.15X vibration on a gascompressor Kevin 1/5/05

Re: 0.15X vibration on a gascompressor-info Svend 1/4/05

Re: 0.15X vibration on a gascompressor-info Hunter 1/4/05

What can cause vibration of a distillation column? Tom R. 1/4/05

Re: What can cause vibration of a distillation column? Arne 1/4/05

free vibration of aircraft wings mohamed kaheal 1/4/05

fan motor vibrating at stator slot pass freq ituanra 1/4/05

Re: fan motor vibrating at stator slot pass freq ituanra 1/4/05

Motor Abnormal Sound Problem er_siddu@yahoo.com 1/4/05

Re: Motor Abnormal Sound Problem bchapman@brightstareng.com 1/4/05

Re: Motor Abnormal Sound Problem er_siddu@yahoo.com 1/4/05

Meter setup for orbit capture? globelives@hotmail.com 1/3/05

Re: Meter setup for orbit capture? Steve Schultheis 1/4/05

Re: Meter setup for orbit capture? Keith 1/4/05

want to buy ird 350 used carlos_luna14@yahoo.com.mx 1/3/05

I have what you want MLeader@Houston.RR.COM 1/8/05

Re: want to buy ird 350 used Eduardo Murphy emurphya@aol.com 1/6/05

Re: want to buy ird 350 used Steve Schultheis 1/5/05

Electro Motor Tests? koomesh 1/3/05

Re: Electro Motor Tests? Arne 1/3/05

bad sound at start of 3kv motor koomesh 1/1/05

Re: bad sound at start of 3kv motor Joe Gurney 1/3/05

Re: bad sound at start of 3kv motor Ron Hartlen 1/4/05

Looking for Armature Balancing Machine for small armature Anthony Yuen 12/30/04

Re: Looking for Armature Balancing Machine for small armature Arne 12/31/04

Accelerometer Specifications Vijay Gajjar 12/30/04

Re: Accelerometer Specifications and more Arne 12/31/04

Re: Accelerometer Specifications and more Vijay Gajjar 1/8/05

Electrical motors (DC) - Line frequency 12/30/04

Re: Electrical motors (DC) - Line frequency Arne 12/30/04

Why the Elec. Faults are at 100 Hz or 120 Hz? Ashraf 12/29/04

Re: Why the Elec. Faults are at 100 Hz or 120 Hz? Arne 12/29/04

Looking for manufacture of Viscous damper for diesel engine pkuimp@dhiltd.co.kr 12/28/04

Vibration and speed Bob Salem 12/25/04

Re: Vibration and speed bob salem 12/26/04

Re: Vibration and speed Spleen 12/28/04

Re: Vibration and speed bob salem 12/26/04

Re: Vibration and speed Steve Schultheis 12/26/04

Re: Vibration and speed Mr Novice 12/25/04

Three point vector diagram balancing method Falguni Datta Roy 12/23/04

Re: Three point vector diagram balancing method viktor718 12/27/04

Re: Three point vector diagram balancing method Arne 12/23/04

What makes a good CBM user interface? Phil 12/22/04

Input and Output pressure of Pump SAM 12/22/04

Re: Input and Output pressure of Pump jasonyu1001@hotmail.com 1/1/05

Re: Input and Output pressure of Pump Eduardo Murphy 12/22/04

Re: Input and Output pressure of Pump Jason 1/1/05

Re: Input and Output pressure of Pump Jason 1/1/05

Pump Question oakbas@superonline.com 12/21/04

Re: Pump Question SAM Ismail 12/21/04

Re: Pump Question oakbas@superonline.com 12/21/04

Re: Pump Question Alex J 12/21/04

Re: Pump Question Alex J 12/21/04

High Noise without Vibrations Ashraf 12/20/04

Re: High Noise without Vibrations 12/21/04

Re: High Noise without Vibrations SAM 12/20/04

Re: High Noise without Vibrations Ashraf 12/21/04

Re: High Noise without Vibrations SAM Ismail 12/21/04

Re: High Noise without Vibrations 12/21/04

Re: High Noise without Vibrations Arie Mol, NL 12/20/04

Re: High Noise without Vibrations Ashraf 12/21/04

Re: High Noise without Vibrations squid 12/20/04

Inlet Pressure Sameeh 12/19/04

High vibration on FD Fan !!!!!!! Falguni Datta Roy 12/19/04

Latching Mechanism Debraj Dey 12/17/04

scale in prism 4 1.35 burck 12/17/04

Re: scale in prism 4 1.35 Mike D Weber (SKF Condition Monitoring) 12/17/04

Re: scale in prism 4 1.35 David G. www.reliabilitydirect.com 12/17/04

Variable Frequency Drives Ron 12/17/04

Variable Frequency Drives Ron 12/17/04

Orbit measurment pali.no@seznam.cz 12/17/04

Mark space differential expansion monitor Michael Titone 12/16/04

Re: Mark space differential expansion monitor Dave G. 12/16/04

ME scope Mike 12/16/04

Re: ME scope Cory Burns 12/21/04

Re: ME scope squid 12/16/04

Re: ME scope Squid 12/16/04

Re: ME scope 12/16/04

Re: ME scope Squid 12/16/04

Horizontal vibration Falguni Datta Roy 12/16/04

Re: Horizontal vibration Muthu 12/17/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent !!!!!!!!! Falguni Datta Roy 12/16/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... muthu 12/24/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... 12/24/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... Falguni Datta Roy 12/17/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... Falguni Datta Roy 12/16/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... 4/13/05

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... richard 12/17/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... jmc 12/17/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... Arie Mol, NL 12/17/04

Re: URGENT !!!! Horizontal vibration of FD Fan - most urgent ... Rob 1/14/05

FD FAN MOTOR VIBRATIONS SAH 12/15/04

Re: FD FAN MOTOR VIBRATIONS Arie Mol, NL 12/17/04

Re: FD FAN MOTOR VIBRATIONS 12/17/04

Re: FD FAN MOTOR VIBRATIONS Muthu 12/17/04

Re: FD FAN MOTOR VIBRATIONS 12/17/04

Re: FD FAN MOTOR VIBRATIONS Alan 12/16/04

Re: FD FAN MOTOR VIBRATIONS 12/17/04

Re: FD FAN MOTOR VIBRATIONS Alan 12/20/04

Re: FD FAN MOTOR VIBRATIONS rafael 12/16/04

Re: FD FAN MOTOR VIBRATIONS 12/16/04

Motor current severity chart CWinder 12/15/04

Re: Motor current severity chart Gerard 12/15/04

Skip: How was it determined that there was water in the oil with Spike Energy? Steve C. 12/14/04

Re: Skip: How was it determined that there was water in the oil w... squid 12/16/04

Re: Skip: How was it determined that there was water in the oil w... Steve 12/15/04

Re: Skip: How was it determined that there was water in the oil w... Shawn 12/15/04

Re: Skip: How was it determined that there was water in the o... Ali 12/15/04

Electrical frequency tomwirsing@yahoo.com 12/14/04

Re: Electrical frequency Dave Ditchfield, Shotton, UK 12/16/04

Journal bearings with accelerometers? Steve C. 12/14/04

Re: Journal bearings with accelerometers? Michael Titone 12/15/04

Re: Journal bearings with accelerometers? Jim P 12/15/04

Re: Journal bearings with accelerometers? Dennis Swanepoel 12/15/04

Re: Journal bearings with accelerometers? MachineryWatch 12/14/04

Re: Journal bearings with accelerometers? William C. Foiles 12/17/04

Skip: Thanks for the response Steve C. 12/14/04

Re: Skip: Thanks for the response MachineryWatch 12/14/04

Re: Skip: Thanks for the response Steve C. 12/16/04

Re: Skip: Thanks for the response mike 12/16/04

Electrical damage to bearings Dave Ditchfield, Shotton Paper Co, UK 12/14/04

Re: Electrical damage to bearings Arie Mol, NL 12/17/04

Re: Electrical damage to bearings roy gariepy 12/17/04

Re: Electrical damage to bearings Arie Mol, NL 12/18/04

Re: Electrical damage to bearings Steve 12/14/04

Re: Electrical damage to bearings Dave Ditchfield, Shotton Paper, UK 12/15/04

Re: Electrical damage to bearings Steve 12/15/04

Re: Electrical damage to bearings Dave Ditchfield, Shotton Paper, UK 12/16/04

Re: Electrical damage to bearings Alan 12/16/04

High in horizontal and axial vibrations marc 12/14/04

Re: High in horizontal and axial vibrations Santa 12/15/04

Re: High in horizontal and axial vibrations marc 12/16/04

Re: High in horizontal and axial vibrations Santa 12/16/04

Re: High in horizontal and axial vibrations Santa 12/16/04

Re: High in horizontal and axial vibrations dkesler@technicalassociates.net 12/16/04

Re: High in horizontal and axial vibrations MachineryWatch 12/16/04

Re: High in horizontal and axial vibrations Santa 12/16/04

Re: High in horizontal and axial vibrations Santa's sorry 12/16/04

Re: High in horizontal and axial vibrations Falguni Datta Roy 12/16/04

Re: High in horizontal and axial vibrations marc 12/16/04

Re: High in horizontal and axial vibrations MachineryWatch 12/14/04

Re: High in horizontal and axial vibrations jim p 12/14/04

Re: High in horizontal and axial vibrations 12/14/04

Dry coupling symptoms in spectral plot data. BDavidso@krauthelectric.com 12/13/04

Motor Current Severity Chart & Analysis Carlos Winder 12/13/04

Article 7186 Carlos Winder 12/13/04

Information on Atlas Copco ZR-250 Screw Compressor Vijay Gajjar 12/13/04

Re: Information on Atlas Copco ZR-250 Screw Compressor Ali 12/15/04

Want to buy Bently Nevada Schematics Craig H 12/12/04

Re: Want to buy Bently Nevada Schematics Arie Mol, NL 12/20/04

Re: Want to buy Bently Nevada Schematics Arie Mol, NL 12/20/04

Re: Want to buy Bently Nevada Schematics Craig Hundley www.bentlynevadaproductsupport.com 2/24/05

Permissible temperatures Carlos Winder 12/11/04

Re: Permissible temperatures Jim P 12/13/04

Impacting RF 12/11/04

Re: Impacting mvc 12/14/04

Re: Impacting Arne 12/11/04

Piedmont Chapter quarterly meeting roy gariepy 12/11/04

Re: Piedmont Chapter quarterly meeting 12/11/04

Turbine JR 12/10/04

Re: Turbine Dennis Swanepoel 12/15/04

Re: Turbine Mike 12/13/04

Re: Turbine 1/4/05

Re: Turbine Steve 12/10/04

odyssey software directsale@excite.com 12/10/04

Re: odyssey software CWinder 12/11/04

bearings Bill 12/9/04

Re: bearings 12/10/04

Re: bearings 12/11/04

Re: bearings Arne 12/10/04

Phase measurement on MicrologCMVA60 Burk 12/9/04

Re: Phase measurement on MicrologCMVA60 prasada.rao@gasco.ae 12/9/04

Re: Phase measurement on MicrologCMVA60 mario 12/10/04

Re: Phase measurement on MicrologCMVA60 12/9/04

coupling problem Mario 12/9/04

Re: coupling problem Shawn 12/9/04

Re: coupling problem Arie Mol, NL 12/9/04

Re: coupling problem Mario 12/10/04

Re: coupling problem Arie Mol, NL 12/13/04

Re: coupling problem Mario 12/14/04

RCM BOOK 12/9/04

Re: RCM BOOK Dave G 12/9/04

Piping vibration Larry Hopkins 12/8/04

Re: Piping vibration Ron Hartlen 12/10/04

Re: Piping vibration Steve 12/10/04

orbit measurements with Enpac 1200 Rad 12/8/04

Boat vibration analysis fpm@eaugallieboatworks.com 12/8/04

Re: Boat vibration analysis Vibration Solutions, Inc. 12/10/04

Re: Boat vibration analysis Vibration Solutions, Inc. 12/10/04

New Guy dayos 12/7/04

Re: New Guy Steve 12/8/04

Sentus Remote Monitoring Control Matters 12/7/04

Re: Sentus Remote Monitoring 12/7/04

Re: Sentus Remote Monitoring 12/31/04

Acceptable Limit shaft vibration Falguni Datta Roy 12/7/04

Re: Acceptable Limit shaft vibration Mike 12/13/04

Re: Acceptable Limit shaft vibration Mario 12/10/04

Re: Acceptable Limit shaft vibration Mario 12/10/04

UNKNOWN FREQUENCY RAY 12/6/04

Re: UNKNOWN FREQUENCY Steve 12/7/04

Re: UNKNOWN FREQUENCY Steve 12/7/04

Re: UNKNOWN FREQUENCY RAY 12/7/04

Re: UNKNOWN FREQUENCY Shawn 12/6/04

Brg. frequencies dnk 12/6/04

Re: Brg. frequencies Eduardo Murphy 12/8/04

Re: Brg. frequencies Dana 12/6/04

Re: Brg. frequencies Alan 12/7/04

Re: Brg. frequencies 12/6/04

Gearbox frequency formula. Pete.O 12/6/04

Re: Gearbox frequency formula. Steve 12/7/04

Spec. Sheet for Bently Nevada Seismosprobe 16699 Anh 12/3/04

Re: Spec. Sheet for Bently Nevada Seismosprobe 16699 Dave G. www.reliabilitydirect.com 12/4/04

Spec. Sheet for Bently Nevada Seismosprobe 16699 Anh 12/3/04

rewinding small carbon brush armature wafa 12/3/04

Re: rewinding small carbon brush armature Arne 12/3/04

Low pass filter and frequency span David 12/2/04

Re: Low pass filter and frequency span MVC 12/3/04

Re: Low pass filter and frequency span Arne 12/3/04

Re: Low pass filter and frequency span mvc 12/5/04

Re: Low pass filter and frequency span Arie Mol, NL 12/3/04

Bently Nevada Balance Master anhntran@pacbell.net 12/2/04

Re: Bently Nevada Balance Master Craig Hundley www.bentlynavadaproductsupport.com 2/24/05

Re: Bently Nevada Balance Master William C. Foiles 12/5/04

Re: Bently Nevada Balance Master Steve Schultheis 12/3/04

Re: Bently Nevada Balance Master Anh 12/8/04

Re: Bently Nevada Balance Master Steve Schultheis 12/9/04

Re: Bently Nevada Balance Master Anh 12/9/04

Re: Bently Nevada Balance Master Steve Schultheis 12/6/04

Re: Bently Nevada Balance Master Anh 12/3/04

Re: Bently Nevada Balance Master Anh 12/3/04

Re: Bently Nevada Balance Master Arne 12/2/04

Re: Bently Nevada Balance Master 12/3/04

Re: Bently Nevada Balance Master Arne 12/3/04

Vitek probe Vadim 12/2/04

Velocity Pickups Sameeh Ismail 12/2/04

Re: Velocity Pickups MVC 12/2/04

Re: Velocity Pickups Arne 12/2/04

Balancing method Bill Molyneaux 12/1/04

Re: Balancing method Gerard 12/4/04

Re: Balancing method Arne 12/2/04

Re: Balancing method Arne 12/2/04

Re: Balancing method Anh Tran 12/2/04

Re: Balancing method Arne 12/2/04

Re: Balancing method Anh Tran 12/2/04

Balancing method Bill Molyneaux 12/1/04

Coupling Analysis Jon 12/1/04

Re: Coupling Analysis Shawn 12/1/04

Re: Coupling Analysis Alan 12/3/04

blade and rotor balance software mcgawjames@yahoo.com 11/30/04

Re: blade and rotor balance software Gerard 12/4/04

Pressure Gauge Failure Jon 11/30/04

Re: Pressure Gauge Failure Arne 11/30/04

Re: Pressure Gauge Failure Jon 12/2/04

Vibration analysis of reciprocating compressor Mike Schackel 11/30/04

Re: Vibration analysis of reciprocating compressor Dave 12/27/04

Re: Vibration analysis of reciprocating compressor 12/27/04

Re: Vibration analysis of reciprocating compressor Dave 12/27/04

Re: Vibration analysis of reciprocating compressor 12/27/04

Vibration of Crack Retaining Ring of Generator Tarwaji-Indonesia Power 11/30/04

Re: Vibration of Crack Retaining Ring of Generator MVC 11/30/04

Re: Vibration of Crack Retaining Ring of Generator tarwaji@yahoo.com 12/1/04

Re: Vibration of Crack Retaining Ring of Generator MVC 12/2/04

Re: Vibration of Crack Retaining Ring of Generator tarwaji@yahoo.com 12/2/04

Re: Vibration of Crack Retaining Ring of Generator Arne 12/1/04

Re: Vibration of Crack Retaining Ring of Generator Arne 11/30/04

Vibration of Crack Retaining Ring of Generator Tarwaji 11/30/04

Toyota Hoosier 11/29/04

Re: Toyota Dan Rains 12/6/04

Re: Toyota Donald Nice, Jr. 11/30/04

Vibration Data Collection / Analysis Device hkitowsk@ford.com 11/29/04

Re: Vibration Data Collection / Analysis Device Dave G. www.reliabilitydirect.com 11/30/04

Re: Vibration Data Collection / Analysis Device Shawn 11/29/04

Re: Vibration Data Collection / Analysis Device Marty Wilkins 11/29/04

Gearbox damages Johannes 11/29/04

Re: Gearbox damages Shawn 11/29/04

vibration in building of high amplitude nareshroxy@yahoo.co.in 11/27/04

High temperature on impeller casing Darmawan@conocophillips.com 11/26/04

Re: High temperature on impeller casing CWinder 12/3/04

Re: High temperature on impeller casing Arne 11/26/04

RUIGERINNI MOTO-PUMP HIGH VIBRATION wgarcia62@hotmail.com 11/25/04

Re: RUIGERINNI MOTO-PUMP HIGH VIBRATION Arne 11/25/04

Re: RUGGERINI Arne 11/26/04

Re: RUGGERINI wgarcia62@hotmail.com 12/23/04

hai ganeshmech2001@yahoo.co.in 11/25/04

RMS reading vesus Frequency Range Leo 11/25/04

Re: RMS reading vesus Frequency Range Ron Hartlen 11/26/04

Re: RMS reading versus Frequency Range Arne 11/26/04

Re: RMS reading versus Frequency Range Ron Hartlen 11/27/04

Re: RMS reading versus Frequency Range Mario 12/10/04

Re: RMS reading vesus Frequency Range Arne 11/25/04

Re: RMS reading vesus Frequency Range Leo 11/26/04

DUAL CHANNEL Vs Single channel pc.kishan@gail.co.in 11/24/04

Re: DUAL CHANNEL Vs Single channel Silverado 11/24/04

Re: DUAL CHANNEL Vs Single channel Dennis Swanepoel 11/24/04

2X AC Line Frrequency..... Puji (electrical@styrindo.co.id) 11/23/04

Re: 2X AC Line Frrequency..... Dave 12/28/04

Re: 2X AC Line Frrequency..... Jim P 11/24/04

Re: 2X AC Line Frrequency..... Shawn 11/24/04

Re: 2X AC Line Frrequency..... darmawan@conocophillips.con 11/24/04

Re: 2X AC Line Frrequency..... 11/24/04

Re: 2X AC Line Frrequency..... Arie Mol, NL 11/24/04

Re: 2X AC Line Frrequency..... Arie Mol, NL 11/24/04

Re: 2X AC Line Frrequency..... puji (electrical@styrindo.co.id) 11/24/04

Re: 2X AC Line Frrequency..... Arie Mol, NL 11/28/04

Help with vibration device BW 11/23/04

IRD 7090 software Daniel 11/23/04

Best Vibration Instruments CWinder 11/22/04

Re: Best Vibration Instruments Arne 11/23/04

universal file format Abdul qader 11/21/04

1 X in veleocity spectrum Mario 11/21/04

Re: 1 X in veleocity spectrum 11/23/04

Re: 1 X in veleocity spectrum rafael 11/23/04

Re: 1 X in veleocity spectrum Arie Mol, NL 11/22/04

Re: 1 X in veleocity spectrum 11/23/04

Re: 1 X in veleocity spectrum Arie Mol,NL 11/23/04

Re: 1 X in veleocity spectrum Arne 11/24/04

Re: 1 X in veleocity spectrum Arie Mol, NL 11/24/04

Re: 1 X in veleocity spectrum Leo 11/22/04

Re: 1 X in veleocity spectrum Mario 12/10/04

Re: 1 X in veleocity spectrum Arne 11/21/04

Re: 1 X in veleocity spectrum 11/21/04

Control Valve Vibrations Abdulaziz 11/21/04

Re: Control Valve Vibrations Arne 11/21/04

Ultrasonic sensor Luca M. 11/19/04

Transmissibility Ratio Sordep 11/18/04

Re: Transmissibility Ratio William C. Foiles 11/19/04

SELF EXCITED FLOW SURGE Fabiano Almeida. 11/18/04

Re: SELF EXCITED FLOW SURGE Arne 11/18/04

Steam Turbine Balancing Silverado 11/18/04

Re: Steam Turbine Balancing William C. Foiles 11/18/04

Re: Steam Turbine Balancing William C. 11/18/04

Ken pC/psi scale factor 11/17/04

Re: Ken Arne 11/17/04

Re: Ken WCFoiles 11/21/04

Sorry I putted name in the wrong place Ken 11/22/04

Re: Sorry I putted name in the wrong place schultheis 11/22/04

vibration energy index oakbas@superonline.com 11/17/04

Re: vibration energy index Walt Strong 11/17/04

Re: Unbalance vs Speed Leo 11/18/04

Re: Unbalance vs Speed Alex J 11/17/04

Re: Unbalance vs Speed Ali 11/18/04

Re: Unbalance vs Speed Eduardo Murphy 11/17/04

Re: Unbalance vs Speed Kiran Toram 11/17/04

Service Center Pump Design Engineer needed richard@baymark.net 11/11/04

Synchronised counter-rotating shaft vibration men1drk@leeds.ac.uk 11/10/04

Re: Synchronised counter-rotating shaft vibration William C. Foiles 11/17/04

Re: Synchronised counter-rotating shaft vibration Steve Schultheis 11/11/04

Re: Synchronised counter-rotating shaft vibration Dave 11/11/04

Re: Synchronised counter-rotating shaft vibration 11/11/04

Re: Synchronised counter-rotating shaft vibration Arie Mol, NL 11/11/04

analyser Claude 11/10/04

IRD Mechanalysis Model 810 B.Ingenthron@comcast.net 11/9/04

Electrospindle balancing ##cbar74@yahoo.es 11/9/04

Re: Electrospindle balancing Arne 11/9/04

Re: Electrospindle balancing ##cbar74@yahoo.es 11/12/04

Bently Nevada RVXYII Craig Hundley 11/9/04

Produced Water Pump Steve 11/9/04

Re: Produced Water Pump Don Z 11/13/04

Re: Produced Water Pump Steve 11/14/04

High vib on vetrical pump allinagrac@yahoo.com 11/9/04

Re: High axial vib on vertical pump Arne 11/9/04

Two plane trim balancing, need help on formula Adnan 11/8/04

Re: Two plane trim balancing, need help on formula Arne 11/8/04

Re: Two plane trim balancing, need help on formula Adnan 11/9/04

Re: Two plane trim balancing, need help on formula Arne 11/9/04

Re: Two plane trim balancing, need help on formula 11/18/04

Pump vibration problem Mike 11/8/04

Re: Pump vibration problem Scott 11/9/04

Re: Pump vibration problem Mike 11/9/04

Re: Pump vibration problem Scott 11/9/04

Re: Pump vibration problem rafael 11/8/04

Re: Pump vibration problem Mike 11/8/04

Re: Pump vibration problem Doug 11/8/04

Re: Pump vibration problem Greg 11/9/04

Re: Pump vibration problem Mike 11/9/04

Pump Blade Band Frequency Bob 11/7/04

Re: Pump Blade Band Frequency Mike 11/8/04

Re: Pump Blade Band Frequency Arne 11/7/04

Re: Pump Blade Band Frequency Bob 11/7/04

Re: Pump Blade Band Frequency Arne 11/8/04

Pump Blade Band Frequency Bob 11/7/04

Help with creating diagnostic vibration device BW 11/3/04

Re: Help with creating diagnostic vibration device Walt Strong 11/4/04

Re: Help with creating diagnostic vibration device JEFF S 11/4/04

Vertical Pump with Variable Speed Rafael Guerrero jguerrero@cespm.gob.mx 11/3/04

Re: Vertical Pump with Variable Speed Roberto Mtz. 11/8/04

cooporation n_3abdrabou@ hotmail.com 11/3/04

Flame Instability (humming) in F-series GTs CStavrou 11/3/04

Re: Flame Instability (humming) in F-series GTs Mike 11/8/04

balancing job with only one accelerometer ? zzlinks@hotmail.com 11/3/04

Re: balancing job with only one accelerometer ? zzlinks@hotmail.com 11/8/04

Re: balancing job with only one accelerometer ? Arie Mol, NL 11/3/04

Re: balancing job with only one accelerometer ? zzlinks@hotmail.com 11/3/04

Re: balancing job with only one accelerometer ? Arie Mol, NL 11/4/04

Re: balancing job with only one accelerometer ? Arne 11/3/04

Weight removal chart source Joe Ferrerio 11/3/04

Re: Weight removal chart source 11/3/04

BNC snapshot and System1 David 11/1/04

Re: BNC snapshot and System1 Sree 11/5/04

Re: BNC snapshot and System1 Mark Jordan imd.us 11/10/04

compound planetary gears fakher (fa_attt@yahoo.fr) 10/30/04

Re: compound planetary gears 11/1/04

Re: compound planetary gears fakher 11/1/04

Re: compound planetary gears Arne 10/30/04

PSD Computation D. Caletka 10/29/04

Re: PSD Computation Eduardo Murphy 10/31/04

Re: PSD Computation Walt Strong 10/29/04

Bearing defect Hans 10/29/04

Re: Bearing defect rafael 11/5/04

Re: Bearing defect Arne 10/29/04

balancing claude schwendenmann 10/29/04

Re: balancing 10/29/04

Re: balancing Claude Schwendenmann 10/29/04

Re: balancing 10/29/04

Re: balancing claude 11/2/04

Re: balancing 10/29/04

Re: balancing MVC 10/29/04

Re: balancing claude schwendenmann 10/29/04

Re: balancing Arne 10/29/04

Re: balancing 10/29/04

Re: balancing Arne 10/29/04

Re: balancing Claude 11/2/04

Re: balancing Arne 11/2/04

Stator Slots and Rotor bars Jon 10/28/04

Re: Stator Slots and Rotor bars Arie Mol, NL 10/30/04

Re: Stator Slots and Rotor bars Shawn 10/29/04

Re: Stator Slots and Rotor bars Alan F 10/28/04

Re: Stator Slots and Rotor bars Jon 11/1/04

Acquiring Orbits from Bently Cabniet with CSI 2120 Rick 10/28/04

Re: Acquiring Orbits from Bently Cabniet with CSI 2120 R. Jagessar 11/6/04

Rotor kit for student use Svend (023482@student.hit.no) 10/28/04

Re: Rotor kit for student use wgarcia62@hotmail.com 12/23/04

Re: Rotor kit for student use B Bott 12/13/04

Re: Rotor kit for student use Arne 10/28/04

Acceptance protocol for vertical motor / pump assemblies Manuel Vergara 10/26/04

Re: Acceptance protocol for vertical motor / pump assemblies Arne 10/26/04

Large rolling element bearings. D. Garnas (dean.garnas@coors.com) 10/26/04

Re: Large rolling element bearings. MachineryWatch 10/26/04

fluid column natural frequencies Frank Testa 10/25/04

Re: fluid column natural frequencies Ron Hartlen 10/25/04

Re: fluid column natural frequencies Arne 10/26/04

failure analyses Johannes 10/25/04

Re: failure analyses Arne 10/25/04

Re: failure analyses Shawn 10/25/04

Re: failure analyses 10/25/04

Reciprocating compressor cylinder vibration mjmaq@hotmail.com 10/24/04

Re: Reciprocating compressor cylinder vibration Steven Schultheis 10/28/04

Re: Reciprocating compressor cylinder vibration Kent Felkins 12/4/04

LDS-Dactron Photon II signal analyzer Tom 10/21/04

hammer testing claude schwendenmann 10/21/04

Re: hammer testing Arne 10/21/04

Re: hammer testing MVC 10/22/04

Re: hammer testing Arne 10/22/04

High 1x after startup???? Sajeev Koshy, Equate 10/21/04

Re: High 1x after startup???? Arne 10/25/04

Re: High 1x after startup???? Sajeev 10/27/04

Re: High 1x after startup???? MVC 10/22/04

Re: High 1x after startup???? Sajeev 10/24/04

Re: High 1x after startup???? Arne 10/21/04

Vibration of Diesel Generator Set Wayne Davis 10/20/04

Re: Vibration of Diesel Generator Set Arne 10/20/04

Re: Vibration of Diesel Generator Set Wayne Davis 10/21/04

Re: Vibration of Diesel Generator Set Arne 10/22/04

Re: Vibration of Diesel Generator Set Wayne Davis 10/21/04

What are acceptable vibration levels in G's for roller bearings Steve C. 10/20/04

Re: What are acceptable vibration levels in G's for roller bearings Arne 10/20/04

Head for Balancing Bench Gemtech@digicom.qc.ca 10/19/04

Re: Head for Balancing Bench Arne 10/19/04

vibration training course in Europe claude schwendenmann 10/19/04

Re: vibration training course in Europe Arne 10/19/04

Do you have some vibration data collected from failure bearing and/or pump? thanks ny_abc2000@yahoo.com 10/18/04

Re: Do you have some vibration data collected from failure bearin... sumit 10/29/04

Re: Do you have some vibration data collected from failure be... Rodrigo (rippmx1@hotmail.com) 2/3/05

do u have bearing vibration data? ny_2000@yahoo.com 10/18/04

do u have bearing vibration data? ny_2000@yahoo.com 10/18/04

AC/DC Electric motors Brian 10/18/04

Re: AC/DC Electric motors Arie Mol, NL 10/20/04

Re: AC/DC Electric motors Brian 10/20/04

Re: AC/DC Electric motors Arie Mol, NL 10/21/04

Re: AC/DC Electric motors Arne 10/18/04

Re: AC/DC Electric motors Brian 10/19/04

Re: AC/DC Electric motors Arne 10/19/04

Re: AC/DC Electric motors Shawn Vail 10/20/04

Vibration in Machines that its fuction is to vribate Hector Luque hluque@star.com.pe 10/17/04

Re: Vibration in Machines when its function is to vibrate Arne 10/17/04

Re: Vibration in Machines when its function is to vibrate 10/19/04

Gear Type Question oakbas@superonline.com 10/14/04

Re: Gear Type Question 10/19/04

crack of blade at steam turbine rafael 10/12/04

Re: crack of blade at steam turbine MachineryWatch 10/14/04

Re: crack of blade at steam turbine Arne 10/14/04

Re: crack of blade at steam turbine abdul charmi 10/14/04

Re: crack of blade at steam turbine Arne 10/13/04

Re: crack of blade at steam turbine Dave G. www.reliabilitydirect.com 10/13/04

Re: crack of blade at steam turbine Arne 10/14/04

Re: crack of blade at steam turbine rafael 10/13/04

Re: crack of blade at steam turbine Arne 10/15/04

Re: crack of blade at steam turbine rafael 10/17/04

Re: crack of blade at steam turbine Slahadin Ashair 3/31/05

Re: crack of blade at steam turbine 10/14/04

Re: crack of blade at steam turbine Arne 10/14/04

Re: crack of blade at steam turbine 10/15/04

Re: crack of blade at steam turbine Arne 10/15/04

Re: crack of blade at steam turbine abdul charmi 10/15/04

ODS with Microlog Roberto Jimenez 10/11/04

Re: ODS with Microlog Dave G. www,reliabilitydirect.com 10/12/04

Savings by vibration level reduction Roberto Jimenez 10/11/04

Re: Savings by vibration level reduction Shawn 10/12/04

high rpm passive balancing device BWM 10/11/04

Re: high rpm passive balancing device O. Wenisch 10/12/04

AutoStat Dale 10/11/04

Re: AutoStat Jim Crowe 10/11/04

Analysing vacuum pump Manni 10/8/04

Re: Analysing vacuum pump Arne 10/10/04

Re:Analysis of vacuum pump Manni 10/8/04

AC Induction / AC Synchronous Motors Ray G 10/7/04

Re: AC Induction / AC Synchronous Motors Arne 10/7/04

Re: AC Induction / AC Synchronous Motors 10/11/04

Synchronous Generator airgap reduction at one end Prem Kumar, C "prem@bhelrnd.co.in" 10/7/04

Re: Synchronous Generator airgap reduction at one end Arne 10/7/04

Re: Synchronous Generator airgap reduction at one end Prem 10/8/04

Re: Synchronous Generator airgap reduction at one end Arne 10/8/04

Re: Synchronous Generator airgap reduction at one end Prem 10/9/04

3 Fans on a Single Shaft Cory 10/6/04

Re: 3 Fans on a Single Shaft Arne 10/6/04

Gearbox Vibrations RF 10/6/04

Re: Gearbox Vibrations Arne 10/6/04

Coolong Tower Fan Balance Jon 10/6/04

Re: Coolong Tower Fan Balance Jim P 10/7/04

Re: Coolong Tower Fan Balance Jim P 10/7/04

Re: Coolong Tower Fan Balance Jon 10/14/04

Axial vibration Centifugal Fan sirj7s@sidor.com 10/5/04

informacion de ird 880 centro de cervicio en mexico felipegarcia20@msn.com 10/4/04

Re: informacion de ird 880 centro de cervicio en mexico Dave G. www.reliabilitydirect.com 10/5/04

Re: informacion de ird 880 centro de cervicio en mexico Arne 10/5/04

Need help in analysing in vibration signature from a pump Lilo 10/4/04

Re: Need help in analysing in vibration signature from a pump Arne 10/4/04

Motor Bearings Ray G 10/4/04

Re: Motor Bearings Shawn 10/4/04

Re: Motor Bearings Ray G 10/5/04

Re: Motor Bearings Shawn 10/5/04

Balance in low RPM Carlos Winder 10/4/04

Re: Balance in low RPM Arne 10/4/04

Starting vibration analysis for machine tools richards_tool@hotmail.com Richard Lynch 10/3/04

Re: Starting vibration analysis for machine tools MVC 10/4/04

Re: Starting vibration analysis for machine tools Arne 10/4/04

Orbit Shape Ian 10/1/04

Re: Orbit Shape Ian 10/5/04

Re: Orbit Shape MVC 10/4/04

Re: Orbit Shape Steven Schultheis 10/1/04

Re: Orbit Shape Arne 10/1/04

interchangeability of reliability product rafael.rajagukguk@kpc.co.id 9/30/04

Re: interchangeability of reliability product MVC 10/1/04

Re: interchangeability of reliability product rafael 10/12/04

Question for consultants and experts about Proximity Probes Eric 9/30/04

Re: Question for consultants and experts about Proximity Probes Steven Schultheis 10/1/04

Re: Question for consultants and experts about Proximity Probes MVC 10/1/04

Re: Question for consultants and experts about Proximity Probes Arne 10/1/04

lock out & tag out for testing rhw2nd@idssproactive.com 9/29/04

Re: lock out & tag out for testing MVC 10/4/04

Time to Archive this page and restart? Arne 9/29/04

I agree completely (NT) Steve C. 9/29/04

Re: Time to Archive this page and restart? plawrence 9/29/04

Re: Time to Archive this page and restart? Arne 9/29/04

Condition Based Maintenance / Monitoring Systems Phil. 9/29/04

Re: Condition Based Maintenance / Monitoring Systems Arne 9/29/04

Condition Based Maintenance / Monitoiring Systems Phil. 9/29/04

Condition Based Maintenance / Monitoiring Systems Phil. 9/29/04

Vibration Analysts Wanted Reliability Careers 9/28/04

Re: Vibration Analysts Wanted tellez_embobinados@yahoo.com.mx 10/1/04

Employment Opportunity Engelhard Corporation 9/27/04

Gearbox High Gs Eric 9/27/04

Re: Gearbox High Gs Arne 9/28/04

Re: Gearbox High Gs Eric 9/30/04

Re: Gearbox High Gs Alex J 9/27/04

IRD 7090 SOFTWARE directsale@excite.com;pisarn2001@yahoo.com 9/26/04

Conversion Formula Help dave.thornton@dvncl.com 9/26/04

Re: Conversion Formula Help Walt Strong 9/27/04

Conversion Formula Help - free conversion program Alan F 9/27/04

Re: Conversion Formula Help MVC 9/26/04

Re: Conversion Formula Help Michael Titone 9/26/04

Pto Generator Gearbox BigO 9/25/04

Re: Pto Generator Gearbox Arne 9/29/04

Sleeve bearings, proximity probes and non-ferrous materials Steve C. 9/24/04

Re: Sleeve bearings, proximity probes and non-ferrous materials 9/27/04

Re: Sleeve bearings, proximity probes and non-ferrous materials Alex J 9/26/04

how detect bending shaft for unbalanced machine ? zzlinks@hotmail.com 9/24/04

Re: how detect bending shaft for unbalanced machine ? Gary K 10/18/04

Re: how detect bending shaft for unbalanced machine ? MVC 9/25/04

Re: how detect bending shaft for unbalanced machine ? zzlinks@hotmail.com 9/25/04

Re: how detect bending shaft for unbalanced machine ? Alex J 9/26/04

Humming sound from generator MVC 9/24/04

Re: Humming sound from generator walter.kusaywa@ps.ge.com 10/6/04

Re: Humming sound from generator Alex J 9/26/04

Re: Humming sound from generator MVC 9/26/04

Re: Humming sound from generator Arie Mol, NL 9/28/04

Re: Humming sound from generator Arie Mol, NL 9/25/04

Strange Gearbox Vibration Characteristics John Glaister 9/23/04

Re: Strange Gearbox Vibration Characteristics Arie Mol, NL 9/25/04

Re: Strange Gearbox Vibration Characteristics John G 9/27/04

Re: Strange Gearbox Vibration Characteristics Leo 9/23/04

Re: Strange Gearbox Vibration Characteristics John G 9/24/04

Re: Strange Gearbox Vibration Characteristics Leo 9/24/04

Re: Strange Gearbox Vibration Characteristics C Winder 9/23/04

Re: Strange Gearbox Vibration Characteristics C Winder 9/23/04

Re: Strange Gearbox Vibration Characteristics Leo 9/23/04

Re: Strange Gearbox Vibration Characteristics John G 9/23/04

Re: Strange Gearbox Vibration Characteristics Mike 9/27/04

Re: Strange Gearbox Vibration Characteristics John G 9/29/04

Re: Strange Gearbox Vibration Characteristics Eric 9/30/04

Re: Strange Gearbox Vibration Characteristics John G 10/20/04

Re: Strange Gearbox Vibration Characteristics John G 10/20/04

Re: Strange Gearbox Vibration Characteristics John G 10/20/04

Re: Strange Gearbox Vibration Characteristics John G 10/20/04

Paper refiner Alan 9/22/04

Re: Paper refiner Johannes 10/25/04

Re: Paper refiner Dave G. www.reliabilitydirect.com 9/22/04

Pump with vibration problem Leo 9/22/04

Re: Pump with vibration problem Michael Titone 9/24/04

Re: Pump with vibration problem Leo 9/22/04

Re: Pump with vibration problem Leo 9/22/04

Re: Pump with vibration problem Walt Strong 9/22/04

Re: Pump with vibration problem Leo 9/22/04

Re: Pump with vibration problem Walt Strong 9/22/04

Re: Pump with vibration problem Leo 9/23/04

Re: Pump with vibration problem Walt Strong 9/23/04

Ballscrew repair Ed Mitchell 9/21/04

Looking for Bently Nevada 7200 8 P rack with 115 VAC Supply Craig Hundley 9/21/04

New 2130 with weird default measure New vib guy 9/20/04

Re: New 2130 with weird default measure Jim Crowe 9/23/04

Re: New 2130 with weird default measure Patrick Lawrence 9/21/04

Re: New 2130 with weird default measure Steven Schultheis 9/21/04

Employment Opportunity vibsnd@singnet.com.sg 9/20/04

Re: Employment Opportunity 9/21/04

Employment Opportunity vibsnd@singnet.com.sg 9/20/04

Employment Opportunity vibsnd@singnet.com.sg 9/20/04

CSI 2115 , 2120 or IRD 350 needed george_cmi@hotmail.com 9/18/04

Article 6614 9/18/04

Generator vibration juliobaez@codetel.net.do 9/18/04

Re: Generator vibration mheijd@technofysica.nl 9/22/04

Re: Generator vibration Arie Mol, NL 9/21/04

Re: Generator vibration Alex J 9/20/04

Re: Generator vibration juliobaez@codetel.net.do 9/20/04

Re: Generator vibration arf2072@yahoo.com 9/18/04

Displacement sensors thomas.w.moritz@usace.army.mil 9/17/04

Re: Displacement sensors Walt Strong 9/17/04

Re: Displacement sensors Shawn 9/17/04

Re: Displacement sensors Alan 9/21/04

Some suggestion are needed for diagnosis of low speed amchinery fanxf@yahoo.com 9/17/04

Re: Some suggestion are needed for diagnosis of low speed amchinery Stuart Courtney 9/21/04

Re: Some suggestion are needed for diagnosis of low speed amc... Theo 9/22/04

Re: Some suggestion are needed for diagnosis of low speed amchinery Arne 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Re: Some suggestion are needed for diagnosis of low speed amc... fanxf@yahoo.com 9/18/04

Subsync Vibration Increases with Time patrickluo@yahoo.ca 9/16/04

Re: Subsync Vibration Increases with Time Arne 9/17/04

Re: Subsync Vibration Increases with Time Patrick 9/19/04

IRD Fast Track software (818) woodsta 9/16/04

Slow roll larger than full speed vibration level colin.malecki@peebles-uk.com 9/16/04

Re: Slow roll larger than full speed vibration level Steve Schultheis 9/16/04

BALL BEARING PARAVIS1@AOL.COM 9/15/04

Re: BALL BEARING Theo 9/23/04

Product Manager Sharon Baker 9/15/04

Re: Product Manager Red 9/27/04

Product Development Manager needed Gregg Anderle 9/15/04

Re: Product Development Manager needed 9/27/04

Re: Product Development Manager needed gregganderle 9/28/04

Re: Product Development Manager needed gregganderle 9/28/04

Severity Chart in Low RPM C Winder 9/15/04

Re: Severity Chart in Low RPM Arne 9/15/04

Maintenance Performance Indicators Byron.Martin@MechEng.Adelaide.edu.au 9/14/04

Re: Maintenance Performance Indicators Dave G, www,reliabilitydirect.com 9/16/04

Gearbox vibration ahurtado 9/13/04

I WANTED CSI 2115 or 2120 LIMA PERU 9/13/04

I Wanted csi 2115 or 2120 Lima Peru 9/13/04

Gearbox vibration ahurtado 9/13/04

Re: Gearbox vibration mheijd@technofysica.nl 9/22/04

Re: Gearbox vibration mheijd@technofysica.nl 9/22/04

Re: Gearbox vibration Arne 9/13/04

Re: Gearbox vibration ahurtado 9/13/04

Re: Gearbox vibration Arne 9/13/04

Prevention of Chronic Failures Susovan 9/10/04

Re: Prevention of Chronic Failures 9/13/04

Re: Prevention of Chronic Failures 9/13/04

SKF Machine Analyst vs. VCI MAX JAY 9/10/04

gear natural frequency testing roy.gariepy@dorlastan.com 9/10/04

gSE vs. Acceleration C Winder 9/9/04

Re: gSE vs. Acceleration MachineryWatch 9/10/04

high speed blancing ala abas 9/9/04

Re: high speed blancing Arne 9/9/04

BALANCING OF FLEXIBLE ROTORS Ashok Bhogle (ashokb@batelco.com.bh) 9/8/04

Re: BALANCING OF FLEXIBLE ROTORS RAJANI 9/10/04

Re: BALANCING OF FLEXIBLE ROTORS Shawn Vail 9/9/04

Re: BALANCING OF FLEXIBLE ROTORS MVC 9/9/04

Re: BALANCING OF FLEXIBLE ROTORS Terry Tomlinson 9/8/04

roller bearing defect shakerfarouk@yahoo.com 9/8/04

Re: roller bearing defect sumit 9/11/04

Re: roller bearing defect Arne 9/12/04

Re: roller bearing defect Sumit 9/11/04

Re: roller bearing defect Sumit 9/11/04

Re: roller bearing defect Arne 9/9/04

Re: roller bearing defect MVC 9/9/04

Contracting out an existing CBM program concerned 9/8/04

Re: Contracting out an existing CBM program 9/10/04

Re: Contracting out an existing CBM program Arne 9/9/04

Contract Work for Engineer vibsnd@singnet.com.sg 9/8/04

PdM Equipment Albert Kluttz 9/7/04

Re: PdM Equipment Arne 9/9/04

Vibration & Thermal Growth Eddy- BrAZIL 9/6/04

Re: Vibration & Thermal Growth MVC 9/9/04

Re: Vibration & Thermal Growth lule 9/7/04

Vibration Standard of electric motors darmawan@conocophillips.com 9/4/04

Re: Vibration Standard of electric motors sumit 9/11/04

Re: Vibration Standard of electric motors Shawn Vail 9/7/04

Re: Vibration Standard of electric motors Arne 9/4/04

Fault finding in fluid film bearings justcurious 9/2/04

Re: Fault finding in fluid film bearings William C. Foiles 9/10/04

Re: Fault finding in fluid film bearings mcdm 9/8/04

Re: Fault finding in fluid film bearings Steve Schultheis 9/7/04

Re: Fault finding in fluid film bearings arun kulkarni 9/5/04

Re: Fault finding in fluid film bearings MachineryWatch 9/2/04

Re: Fault finding in fluid film bearings Arne 9/3/04

DC to 5Hz frequency - Vibration Danny Tang 9/1/04

Re: DC to 5Hz frequency - Vibration MachineryWatch 9/2/04

Re: DC to 5Hz frequency - Vibration Walt Strong 9/2/04

Re: DC to 5Hz frequency - Vibration Dave Gallagher 9/1/04

Utilization of Analysis Dan The Man 8/30/04

Re: Utilization of Analysis MachineryWatch 9/1/04

Re: Utilization of Analysis Willem 9/8/04

Re: Utilization of Analysis Shawn Vail 8/31/04

Re: Utilization of Analysis Arne 8/30/04

OverSpeed Protection Mike 8/27/04

Re: OverSpeed Protection Steve Grundy 9/8/04

Re: OverSpeed Protection Dave Gallagher, www.reliabilitydirect.com 8/27/04

Re: OverSpeed Protection Steve Schultheis 8/27/04

Vertical alignment Sumit 8/27/04

Re: Vertical alignment jorgemauricio@netcabo.pt 8/30/04

Re: Vertical alignment Arne 8/27/04

Beware the sneaky machine Alan 8/27/04

Re: Beware the sneaky machine MachineryWatch 9/1/04

Re: Beware the sneaky machine Shawn Vail 9/1/04

Re: Beware the sneaky machine Shawn 8/27/04

Re: Beware the sneaky machine Arne 8/27/04

Test of unloaded motor Marc 8/25/04

Re: Test of unloaded motor arie mol, nl 8/30/04

Re: Test of unloaded motor Arne 8/25/04

Re: Test of unloaded motor David 8/31/04

help in some equpiments Simple 8/25/04

Balancing Centrifugal Fan Rudolf 8/25/04

Bypassing securities 8/24/04

Cylindrical Bearing Failure havenpls@telus.net 8/24/04

Power turbine vibration Willard 8/23/04

Re: Power turbine vibration Steven Schultheis 8/24/04

Pwer turbine vibration Willard 8/23/04

Changing phase angle Stan Dalziel 8/23/04

Re: Changing phase angle Antonio 8/23/04

High vibration in 800hp turbine Antonio; roan2323@tricom.net 8/21/04

Re: High vibration in 800hp turbine Alex J 8/23/04

Re: High vibration in 800hp turbine Arne 8/22/04

Re: High vibration in 800hp turbine Antonio 8/23/04

Nash Vacuum Pump K. Watkins email watkins@ewklein.com 8/20/04

IRD FAST TRACK AND IRD 890 PISARN (directsale@excite.com) 8/20/04

Re: IRD FAST TRACK AND IRD 890 woodsta 9/16/04

Re: IRD FAST TRACK AND IRD 890 C Winder 9/15/04

Vibration spectral analysis & Statistics Evelyn 8/19/04

Re: Vibration spectral analysis & Statistics Jim 8/20/04

Re: Vibration spectral analysis & Statistics Evelyn 8/23/04

Re: Vibration spectral analysis & Statistics MachineryWatch 8/26/04

Collecting your own data vs Alternative Jeremy W. Cole 8/19/04

Re: Collecting your own data vs Alternative Brian 9/2/04

Re: Collecting your own data vs Alternative Alan 8/20/04

Re: Collecting your own data vs Alternative Charles Wright 8/20/04

Re: Collecting your own data vs Alternative Shawn 8/20/04

Re: Collecting your own data vs Alternative Arne 8/19/04

Re: Collecting your own data vs Alternative Mike Cooney 8/19/04

vibration at suction end of air compressor- motor driven ankireauqe@hotmail.com 8/19/04

Pump Casing Material and Vibration Thomas Kurian 8/18/04

Re: Pump Casing Material and Vibration Arne 8/19/04

Re: Pump Casing Material and Vibration Shawn 8/19/04

Re: Pump Casing Material and Vibration Ron Hartlen 8/19/04

Jack oil arrangement Falguni Datta Roy 8/18/04

Re: Jack oil arrangement Eduardo Murphy 8/19/04

ird pm power software nd IQ2000 PISARN (directsale&excite.com) 8/18/04

Re: ird pm power software nd IQ2000 pisarn 8/20/04

Re: ird pm power software nd IQ2000 Dave G www.reliabilitydirect.com 8/20/04

Re: ird pm power software nd IQ2000 Dave G. www.ReliabilityDirect.com 8/18/04

Axial Fan: Rigid body modes Andres 8/18/04

Re: Axial Fan: Rigid body modes Sarh K 8/19/04

Re: Axial Fan: Rigid body modes Andres 8/19/04

Re: Axial Fan: Rigid body modes Arne 8/19/04

Multistage Pumps How Would Cavitation look in spectrum Jeff S 8/16/04

Re: Multistage Pumps How Would Cavitation look in spectrum William 8/18/04

Re: Multistage Pumps How Would Cavitation look in spectrum 10/7/04

Re: Multistage Pumps How Would Cavitation look in spectrum MVC 8/18/04

Re: Multistage Pumps How Would Cavitation look in spectrum pk 8/17/04

Re: Multistage Pumps How Would Cavitation look in spectrum Alex J 8/18/04

Re: Multistage Pumps How Would Cavitation look in spectrum Ron Hartlen 8/18/04

Re: Multistage Pumps How Would Cavitation look in spectrum jeff s 8/17/04

API 617 Gianni 8/10/04

Re: API 617 Giridhar 9/10/04

Re: API 617-July 2002 v.hosseini@petroiran.com 4/5/05

Shaft & Bearing Assembly useing glue Falguni Datta Roy 8/10/04

Re: Shaft & Bearing Assembly useing glue 8/13/04

Re: Shaft & Bearing Assembly useing glue Shawn 8/10/04

Testing Unloaded Motors Jon 8/9/04

Re: Testing Unloaded Motors john 8/12/04

Re: Testing Unloaded Motors Shawn 8/9/04

Belt RPM Mark 8/9/04

Re: Belt RPM Eduardo Murphy 8/10/04

Re: Belt RPM Shawn 8/9/04

Re: Belt RPM Arne 8/9/04

why all machines vibrate vpavan1981@yahoo.co.in 8/8/04

Re: why all machines vibrate MVC 8/9/04

electrical diagrams of TK-8 instrument arie mol 8/7/04

Thrust Vibration irfan_ahmed_sheikh@hotmail.com 8/7/04

Re: Thrust Vibration Steven Schultheis 8/9/04

Re: Thrust Vibration 10/7/04

Re: Thrust Vibration MVC 8/7/04

Re: Thrust Vibration 8/8/04

Re: Thrust Vibration abdul charmi 8/9/04

Re: Thrust Vibration irfan_ahmed_sheikh@hotmail.com 8/11/04

Re: Thrust Vibration Abdul Charmi 8/11/04

Re: Thrust Vibration Steven Schultheis 8/11/04

Re: Thrust Vibration abdul Charmi 8/11/04

Re: Thrust Vibration irfan_ahmed_sheikh@hotmail.com 8/12/04

Re: Thrust Vibration Abdul Charmi 8/12/04

Re: Thrust Vibration irfan_ahmed_sheikh@hotmail.com 8/13/04

Re: Thrust Vibration Abdul Charmi 8/13/04

Re: Thrust Vibration 8/14/04

Re: Thrust Vibration irfan_ahmed_sheikh@hotmail.com 8/13/04

Re: Thrust Vibration arie mol, nl 8/16/04

Re: Thrust Vibration 8/17/04

Re: Thrust Vibration arie mol, nl 8/17/04

Re: Thrust Vibration 8/18/04

Thrust Vibration Irfan 8/7/04

Re: Thrust Vibration Please contact us 8/27/04

Re: Thrust Vibration Please contact us 8/27/04

Re: Thrust Vibration Please contact us 8/27/04

Portable online and offline machinery diagnosis system Red Yuan 8/6/04

Re: Portable online and offline machinery diagnosis system 8/6/04

Could you leave your contact info? Red Yuan 8/9/04

Buffered signal Mark 8/6/04

Re: Buffered signal Steven Schultheis 8/9/04

Re: Buffered signal MVC 8/7/04

Fiber Draw Vibration Isolation Ed 8/5/04

Re: Fiber Draw Vibration Isolation Arne 8/5/04

Coldrolling and flatness (quarter buckling) Cloggy 8/4/04

Clearing Transducer Type on IRD 245 Marcello Baca email mbaca62@msn.com 8/4/04

Re: Clearing Transducer Type on IRD 245 glabatte@hoskin.ca 10/25/04

Smart Adviser Tony UK 8/4/04

Re: Smart Adviser MachineryWatch 8/5/04

ISO STANDARD 2372 8/4/04

Re: ISO STANDARD 2372 Arne 8/4/04

Re: ISO STANDARD 2372 hermann.mbami-engo/external@alcan.com 9/27/04

Re: ISO STANDARD 2372 Mario 12/10/04

Aliasing and Sigma-Delta ADC Danno 8/3/04

Re: Aliasing and Sigma-Delta ADC Theo 8/5/04

Re: Aliasing and Sigma-Delta ADC Danno 8/5/04

Re: Aliasing and Sigma-Delta ADC Theo 8/4/04

Vibration isolation for Jet-fans Andres Mechanical 8/3/04

Re: Vibration isolation for Jet-fans Theo 8/4/04

Re: Vibration isolation for Jet-fans Andres Mechanical 8/4/04

Re: Vibration isolation for Jet-fans Theo 8/5/04

Re: Vibration isolation for Jet-fans Arne 8/4/04

BULIDING VIBRATIONS STANDARD Ali 8/3/04

Re: BULIDING VIBRATIONS STANDARD S.DelloRusso 8/13/04

Re: BULIDING VIBRATIONS STANDARD Sumit 8/3/04

Hard Bearing or Dynamic Hard Suspansion Balancing Technique Edd 8/2/04

Re: Hard Bearing or Dynamic Hard Suspansion Balancing Technique Arne 8/2/04

Re: Hard Bearing or Dynamic Hard Suspansion Balancing Technique Edd 8/3/04

Suppress the vibration of your equipment with passive/active dynamic absorbers! Victor Glodov 8/2/04

ird software pisarn (directsale@excite.com) 8/2/04

Equipment Trips Mike 8/1/04

Re: Equipment Trips Steve Schultheis 8/2/04

Re: Equipment Trips Mike 8/2/04

DataPac 1500 problem with transducer installation Uri Greenberg IEC 8/1/04

Re: DataPac 1500 problem with transducer installation vibration_eng@hotmail.com 10/28/04

Re: DataPac 1500 problem with transducer installation Victor Glodov 8/2/04

Distances between Planes Edd 7/31/04

Re: Distances between Planes Arne 7/31/04

Re: Distances between Planes 8/2/04

Results to Condition Based Monitoring Survey Phil 7/30/04

Re: Results to Condition Based Monitoring Survey Phil 8/18/04

Low Speed Gearbox Analysis gvr 7/30/04

Re: Low Speed Gearbox Analysis Arne 7/30/04

Re: Low Speed Gearbox Analysis Jim 8/20/04

RELIABILITY CERTIFICATION ALI 7/29/04

Re: RELIABILITY CERTIFICATION Joe Petersen 4/13/05

Design Engineering Manager gregganderle 7/28/04

Operator Driven Reliability chris maharaj 7/27/04

setting up machine vibration points chris maharaj 7/27/04

Re: setting up machine vibration points Squid 7/29/04

Re: setting up machine vibration points Shawn 7/27/04

Re: setting up machine vibration points dave 7/27/04

Re:Using Different Accelerometers Pilo 7/27/04

Re:Using Different Accelerometers Dnicejr 7/28/04

Loudspeaker Cabinet Panel Vibration digitalsparks@hotmail.com 7/27/04

ingersoll rand E516 expander dave 7/27/04

Re: ingersoll rand E516 expander Malcolm Leader 7/29/04

vertical fire water pump Harry Lijzenga, NAVY dutch 7/26/04

Re: vertical fire water pump Alex J 7/27/04

Re: vertical fire water pump shawn 7/26/04

Re: vertical fire water pump 7/27/04

Re: vertical fire water pump Shawn 7/27/04

Re: vertical fire water pump Arne 7/27/04

Re: vertical fire water pump Harry 7/27/04

Hydaulic pump monitoring Zagowski 7/24/04

Re: Hydaulic pump monitoring Arne 7/25/04

Help with crashed centra database Barry 7/21/04

Re: Help with crashed centra database Eduardo Murphy 7/25/04

Re: Help with crashed centra database Dave G. www.reliabilitydirect.com 7/21/04

Glossy Paint to avoid dust deposition on impeller Falguni Datta Roy 7/20/04

Re: Glossy Paint to avoid dust deposition on impeller Arne 7/20/04

Re: Glossy Paint to avoid dust deposition on impeller Arne 7/20/04

Fan vibration foster 7/19/04

Re: Fan vibration arie mol, nl 7/20/04

Re: Fan vibration - three point balancing Arne 7/21/04

Re: Fan vibration - three point balancing Falguni Datta Roy 12/16/04

Re: Fan vibration - three point balancing arie mol, NL 7/27/04

Re: Fan vibration Arne 7/20/04

Re: Fan vibration Steve 7/19/04

Portable vibration analysis system Red Yuan 7/19/04

Re: Portable vibration analysis system Gemtech@digicom.qc.ca 7/20/04

TSA and Looseness Clint Grafelman 7/18/04

Re: TSA and Looseness Dave 7/19/04

Re: TSA and Looseness vibrant 7/22/04

evaluate vehicle engine vibration isolate performance tkmail@sohu.com 7/15/04

Methods for acceleration signal analysis Red Yuan 7/15/04

Re: Methods for acceleration signal analysis 7/16/04

Re: Methods for acceleration signal analysis Ali Al-Shurafa 7/19/04

Evaluate isolating effect tkmail@sohu.com 7/15/04

Cotizacion smedrano98@hotmail.com 7/14/04

Re: Cotizacion Tu Jefe 9/15/04

Re: Cotizacion Dave G. 7/14/04

Datapac Needed jpalmer65a@yahoo.com 7/14/04

about the airgap range between the Speed sensor and the actuator lzyao@ynmail.com (Nanjing,P.R.China) 7/14/04

High Vibration in Generator Bearing. Uri Greenberg IEC 7/13/04

Re: High Vibration in Generator Bearing. MVC 7/13/04

Re: High Vibration in Generator Bearing. Uri Greenebrg 7/15/04

Re: High Vibration in Generator Bearing. rcroix@houston.rr.com 7/19/04

ultrasound testing dnk 7/13/04

Re: ultrasound testing Steve 7/13/04

Steel base design for isolating equipment against shock manishmon@yahoo.com 7/12/04

Statistical Analysis Sumit 7/10/04

Re: Statistical Analysis Ali Al-Shurafa 7/10/04

cracks cooling pipe to generator Harry 7/9/04

Re: cracks cooling pipe to generator Arne 7/10/04

Re: cracks cooling pipe to generator Agustin Abaroa Sr. 7/10/04

converting mm to inches dseddon 7/8/04

Re: converting mm to inches Mike 7/14/04

Re: converting mm to inches Dave G. 7/8/04

converting mm to inches dseddon 7/8/04

Fluid Bed Blower Jr 7/8/04

Re: Fluid Bed Blower arie mol,nl 7/10/04

Re: Fluid Bed Blower Agustin Abaroa Sr. 7/10/04

Re: Fluid Bed Blower joe 7/15/04

High Axial Vibration Patrick Campbell 7/8/04

Re: High Axial Vibration Agustin Abaroa Sr. 7/10/04

Re: High Axial Vibration Ali Al-Shurafa 7/10/04

Low profile accels Randle 7/8/04

Re: Low profile accels Dave G. www.reliabilitydirect,com 7/8/04

Entek Datapac 1500 Wanted Barry Busey 7/8/04

Re: Entek Datapac 1500 Wanted slicata@bex.net 2/25/05

Re: Entek Datapac 1500 Wanted slicata@bex.net 2/25/05

Soft foot Marc 7/8/04

Re: Soft foot ibrahim.caglayan@vibratek.com.tr 7/14/04

Re: Soft foot arie mol 7/10/04

Re: Soft foot Agustin Abaroa Sr. 7/10/04

Vibration Specifications Joe Hadden 7/6/04

Re: Vibration Specifications Ali Al-Shurafa 7/7/04

Re: Vibration Specifications Agustin Abaroa Sr. 7/10/04

Re: Vibration Specifications Ali Al-Shurafa 7/10/04

Re: Vibration Specifications Agustin Abaroa Sr. 7/11/04

Spectrums & Waveforms Scott 7/6/04

Re: Spectrums & Waveforms Jeremy Cole 8/24/04

Re: Spectrums & Waveforms Ali Al-Shurafa 7/10/04

Re: Spectrums & Waveforms vibrant 7/12/04

Oscilating Vibration carickh@redstickarmature.com 7/6/04

Re: Oscilating Vibration Agustin Abaroa Sr. 7/10/04

Re: Oscilating Vibration Eduardo Murphy 7/6/04

Re: Oscilating Vibration Michael Titone 7/6/04

Re: Oscilating Vibration Carick 7/7/04

Re: Oscilating Vibration Shawn Vail 7/8/04

Re: Oscilating Vibration Shawn Vail 7/6/04

Re: Oscilating Vibration Carick 7/6/04

Re: Oscilating Vibration DavidM 7/6/04

vibration in pump venkatesh 7/5/04

Re: vibration in pump A 7/6/04

Re: vibration in pump Abdul Charmi 7/5/04

Fluctuating gear mesh + pinion harmonics james_phoon@hotmail.com 7/4/04

Re: Fluctuating gear mesh + pinion harmonics MVC 7/16/04

VIBRATION EVENT AT INDIA VETOMAC 7/1/04

Re: VIBRATION EVENT AT INDIA sharan_sp@ongc.co.in 3/16/05

Gears eccentricity Mike 6/29/04

Re: Gears eccentricity JIM 8/20/04

Re: Gears eccentricity GCA 6/30/04

Portable Lube oil tester Mike 6/29/04

Re: Portable Lube oil tester ibrahim.caglayan@vibratek.com.tr 7/14/04

Re: Portable Lube oil tester David Gallagher 6/29/04

Re: Portable Lube oil tester Mike 6/30/04

Re: Portable Lube oil tester Dave G. 6/30/04

Re: Portable Lube oil tester Arne 7/1/04

Re: Portable Lube oil tester Dave G. 7/1/04

Balance dnk 6/29/04

Re: Balance Steve Schultheis 6/29/04

Re: Balance smhcf6@hotmail.com 1/23/05

Re: Balance Ali Al-Shurafa 7/3/04

Assembly of Sleeve Bearing ( Dodge ) Falguni Datta Roy 6/29/04

Vibration overall level against 1X level T Kurian 6/29/04

Re: Vibration overall level against 1X level Diesel driven pump acceptance vibration levels 6/29/04

SKF Microvibe, toy or tool? Vic 6/28/04

Re: SKF Microvibe, toy or tool? jdavis@adpi.com 8/18/04

Re: SKF Microvibe, toy or tool? George 6/29/04

Re: SKF Microvibe, toy or tool? Vic 6/29/04

Re: SKF Microvibe, toy or tool? Dan Bradley 6/30/04

Re: SKF Microvibe, toy or tool? Dave G. 7/1/04

Torsional Vibration Dampers: Viscous Media Degradation mark@materialsanalysis.com 6/28/04

Re: Torsional Vibration Dampers: Viscous Media Degradation Malcolm Leader 7/29/04

APV CREPACO LIQUIVERTER REGGIE CABUSOG 6/26/04

Re: APV CREPACO LIQUIVERTER Gerard 6/27/04

Se vende Oddysey 1.3 belo_es 6/26/04

static balance stands lee 6/25/04

sullair two stage rotary screw compressor sean kelleher 6/25/04

Gear Standard Sumit 6/25/04

Re: Gear Standard Ali Al-Shurafa 7/3/04

Re: Gear Standard MVC-Thailand 6/27/04

Re: Gear Standard Sumit 7/2/04

Article 6120 Sumit 6/25/04

Rotary Screw Compressor Atlas Copco ZR-55. Rahardi 6/25/04

API & ISO regs for balancing electric motors rotors Jherman 6/24/04

Re: API & ISO regs for balancing electric motors rotors Arne 6/24/04

increasing vibration levels on turbine chris maharaj 6/22/04

Re: increasing vibration levels on turbine Jim P 6/24/04

Re: increasing vibration levels on turbine MVC 6/24/04

Re: increasing vibration levels on turbine 6/24/04

NE NDE BRG Mil 6/22/04

Re: NE NDE BRG Rob 3/15/05

Re: NE NDE BRG David G. www.maintenanceproductsdirect..com 6/22/04

Re: NE NDE BRG gemtech@digicom.qc.ca 6/22/04

Re: NE NDE BRG Arne 6/22/04

Orbits Jon 6/21/04

Re: Orbits Ali Al-Shurafa 7/2/04

Re: Orbits vishalgour@yahoo.com 7/30/04

Re: Orbits Mario 12/10/04

Re: Orbits Mario 12/10/04

Re: Orbits James 6/29/04

Re: Orbits MVC 6/24/04

Re: Orbits Steve Schultheis 6/22/04

Re: Orbits 6/21/04

4x Gearmesh Steve 6/21/04

Re: 4x Gearmesh Aditya 6/24/04

Re: 4x Gearmesh Don Nice, Jr. 6/21/04

Re: 4x Gearmesh Steve 6/21/04

Re: 4x Gearmesh arie mol, nl 6/30/04

Motor Faults RF 6/20/04

Re: Motor Faults Charlie cs2mh@aol.com 6/20/04

High Vibration at GT azmia@tnrd.com.my 6/20/04

Re: High Vibration at GT MVC 6/21/04

Re: High Vibration at GT 6/21/04

No Load current of motor. Falguni Datta Roy 6/20/04

Re: No Load current of motor. ajoy 2/18/05

Re: No Load current of motor. Aditya 6/24/04

Re: No Load current of motor. Charlie cs2mh@aol.com 6/20/04

Re: No Load current of motor. Arne 6/21/04

agitator resonance lxchen@actog.com 6/18/04

Re: agitator resonance MVC 6/21/04

Re: agitator resonance Steven Schultheis 6/19/04

Re: agitator resonance lxchen@actog.com 6/23/04

Motor vibration - VFD's Craig Van Wyke 6/18/04

Re: Motor vibration - VFD's Arne 6/19/04

Vibration Attenuation of Welded Bellows CMCA 6/18/04

MOITORING LOCATIONS Jon 6/15/04

Re: MOITORING LOCATIONS MG 6/17/04

Re: MOITORING LOCATIONS Jim P 6/16/04

Re: MOITORING LOCATIONS Walt Strong 6/15/04

Re: MOITORING LOCATIONS Eduardo Murphy 6/17/04

Re: MONITORING LOCATIONS Jon 6/16/04

PIPE STRAIN b foster 6/14/04

Re: PIPE STRAIN Carmelo Silva 7/9/04

Re: PIPE STRAIN jampol_2020@yahoo.com 12/6/04

Re: PIPE STRAIN MVC 6/21/04

Re: PIPE STRAIN Gerard 6/19/04

Increasing Steam turbine 150Kw)Vibration er_siddu@yahoo.com 6/14/04

Re: Increasing Steam turbine 150Kw)Vibration MVC 6/21/04

Re: Increasing Steam turbine 150Kw)Vibration Gervais Charron www.voici.ca/gemtech 6/14/04

Re: Increasing Steam turbine 150Kw)Vibration Terry 6/14/04

Axial vibration of NDE side Bearing Falguni Datta Roy 6/13/04

Re: Axial vibration of NDE side Bearing 6/14/04

Re: Axial vibration of NDE side Bearing MVC 6/21/04

Re: Axial vibration of NDE side Bearing Falguni Datta Roy 6/20/04

POLY AGITATOR GEAR BOX VIBRATIONS ALI 6/13/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS Eduardo Murphy 6/15/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS 6/17/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS Eduardo Murphy 6/17/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS 6/19/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS 6/19/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS Eduardo Murphy 6/21/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS 6/23/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS Eduardo Murphy 6/23/04

Re: POLY AGITATOR GEAR BOX VIBRATIONS 6/24/04

position vibrationmeasurement dieselengine ship Harry Lijzenga 6/12/04

Re: position vibrationmeasurement dieselengine ship Arne 6/17/04

Re: position vibrationmeasurement dieselengine ship Harry 7/9/04

Resnonance Vibration Moe 6/11/04

Re: Resnonance Vibration Walt Strong 6/12/04

Re: Resnonance Vibration 6/16/04

Re: Resnonance Vibration Walt Strong 6/16/04

Reduction in Stray currents rajendra_a_zope@ril.com 6/10/04

Re: Reduction in Stray currents Mike Ralph 7/1/04

motor current analyzers 6/10/04

Re: motor current analyzers Aditya 6/11/04

Re: motor current analyzers Dave G, www.ReliabilityDirect.com 6/10/04

Re: motor current analyzers 6/11/04

Bent Shaft on an overhung blower Scott 6/10/04

Re: Bent Shaft on an overhung blower samduck1@hotmail.com 7/8/04

Re: Bent Shaft on an overhung blower samduck1@hotmail.com 7/8/04

Re: Bent Shaft on an overhung blower Eduardo Murphy 6/10/04

Re: Bent Shaft on an overhung blower Scott 7/1/04

Re: Bent Shaft on an overhung blower vibrant 6/10/04

Peakvue vs SST for low speed gearboxes aberry 6/9/04

Re: Peakvue vs SST for low speed gearboxes MVC 6/10/04

Arrangement of bearing sealing falguni_02@yahoo.co.in 6/8/04

Re: Arrangement of bearing sealing Alex J 6/11/04

Axial Float Of a 90 kw/4p/60hz motor falguni_02@yahoo.co.in 6/8/04

Re: Axial Float Of a 90 kw/4p/60hz motor Charlie cs2mh@aol.com 6/8/04

Re: Axial Float Of a 90 kw/4p/60hz motor falguni_02@yahoo.co.in 6/9/04

Re: Axial Float Of a 90 kw/4p/60hz motor 10/15/04

Axial Float and vibration Charlie cs2mh@aol.com 6/9/04

High frequency analysis SCA 6/8/04

Re: High frequency analysis Roger 7/15/04

balacing the fan dijeeshdivakaran@yahoo.co.uk 6/7/04

Re: balacing the fan falguni_02@yahoo.co.in 6/8/04

Re: balacing the fan Walt Strong 6/7/04

Bearing frequency on fan shaft sumit.c@navy.mi.th 6/5/04

Re: Bearing frequency on fan shaft MVC-Thailand 6/9/04

Re: Bearing frequency on fan shaft Sumit 6/25/04

Re: Bearing frequency on fan shaft Walt Strong 6/5/04

Order analysis with commercial products Cristi{an Molina Vicuña, University of Concepción, Chile 6/4/04

Re: Order analysis with commercial products willem 7/1/04

Re: Order analysis with commercial products Eduardo Murphy 6/4/04

Re: Order analysis with commercial products cristián 6/5/04

Re: Order analysis with commercial products MVC-Thailand 6/9/04

Re: Order analysis with commercial products 6/9/04

Re: Order analysis with commercial products Eduardo Murphy 6/5/04

Re: Order analysis with commercial products dr.becker@flenbder-cm.com 6/4/04

SCI 2115 Machinery Analyzer for sale Brian 6/4/04

Re: SCI 2115 Machinery Analyzer for sale 6/16/04

Re: SCI 2115 - Oops!! 6/4/04

Vibration Probe Identidfication andrew.kasper@ge.com 6/4/04

Re: Vibration Probe Identidfication MVC-Thailand 6/9/04

Bearing Failure Analysis Randle 6/4/04

Re: Bearing Failure Analysis Alan F 6/4/04

Re: Bearing Failure Analysis Charlie cs2mh@aol.com 6/4/04

Re: Bearing Failure Analysis Jim Crowe 6/4/04

Testing of 4-20mA RMS Acceleration Sensing Transmitter Vijay 6/4/04

Re: Testing of 4-20mA RMS Acceleration Sensing Transmitter MVC-Thailand 6/9/04

Re: Testing of 4-20mA RMS Acceleration Sensing Transmitter MVC-Thailand 6/9/04

Vane pass frequency for blower Jeff 6/3/04

Re: Vane pass frequency for blower Walt Strong 6/3/04

Sorry, didn't answer all your questions Jeff 6/4/04

No coupling failures...yet Jeff 6/4/04

Re: No coupling failures...yet Walt Strong 6/4/04

Walt:thanks for the info. But just assume calc is correct (read on) Jeff 6/6/04

Re: Walt:thanks for the info. But just assume calc is correct (r... Walt Strong 6/7/04

distinguishing looseness from eccentricity chris maharaj 6/3/04

Re: distinguishing looseness from eccentricity MVC-Thailand 6/9/04

Vibration Analysis Training in USA Aditya 6/3/04

Re: Vibration Analysis Training in USA David Eason 6/3/04

Re: Vibration Analysis Training in USA Aditya 6/4/04

Re: Vibration Analysis Training in USA David Eason 6/4/04

Re: Vibration Analysis Training in USA Eduardo Murphy 6/3/04

Ruston Trips Terry 6/3/04

Re: Ruston Trips Adrian 6/3/04

design of rotor venkata kiran from india 6/2/04

Ruston GG high 0.5x at #2 bearing Adrian 6/2/04

Re: Ruston GG high 0.5x at #2 bearing Ian 6/5/04

Re: Ruston GG high 0.5x at #2 bearing Adrian 6/8/04

Re: Ruston GG high 0.5x at #2 bearing Abdul Charmi 6/18/04

Re: Ruston GG high 0.5x at #2 bearing 6/25/04

Re: Ruston GG high 0.5x at #2 bearing Abdul Charmi 7/3/04

Re: Ruston GG high 0.5x at #2 bearing Adrian 7/6/04

Re: Ruston GG high 0.5x at #2 bearing Abdul Charmi 7/8/04

Re: Ruston GG high 0.5x at #2 bearing Steve Schultheis 6/3/04

Re: Ruston GG high 0.5x at #2 bearing Steve Schultheis 6/3/04

Re: Ruston GG high 0.5x at #2 bearing Adrian 6/3/04

4x Gear mesh w/ sidebands, please answer asap. Rudy 6/2/04

Re: 4x Gear mesh w/ sidebands, please answer asap. arie mol, nl 6/30/04

Re: 4x Gear mesh w/ sidebands, please answer asap. dr.becker@flender-cm.com 6/3/04

Re: 4x Gear mesh w/ sidebands, please answer asap. Adrian 6/2/04

Race Car Driveshaft Soccer God 6/2/04

Balancing a Cooling Tower Fan bellefield@aol.com 5/30/04

Re: Balancing a Cooling Tower Fan roan2323@tricom.net 8/21/04

Re: Balancing a Cooling Tower Fan Gerard 6/2/04

Re: Balancing a Cooling Tower Fan Ken 5/31/04

Re: Balancing a Cooling Tower Fan DavidM 6/1/04

Re: Balancing a Cooling Tower Fan Arne 5/30/04

Ist thermal bow raid 5/28/04

Re: Ist thermal bow Ken 5/31/04

Re: Ist thermal bow 5/28/04

Re: Ist thermal bow Arne 5/28/04

1x's and harmonic with ouput sidebands. b foster 5/28/04

Re: 1x's and harmonic with ouput sidebands. Arne 5/28/04

IMAGE GRABBING FROM SINGLE FRAMEGRABBER Sankarshan Murthy 5/28/04

Re: IMAGE GRABBING FROM SINGLE FRAMEGRABBER Arne 5/28/04

Over Hung Fans jeff_schiller@elkvalleycoal.ca 5/28/04

Re: Over Hung Fans Arne 5/28/04

IRD 9008 Sensor N. C. Murmu 5/27/04

Sleave Vrs Ball Bearing Motor b foster 5/26/04

Re: Sleave Vrs Ball Bearing Motor Charlie cs2mh@aol.com 5/26/04

Modal results on shaker and hammer differ scott j 5/26/04

Re: Modal results on shaker and hammer differ T Dahling 5/28/04

Re: Modal results on shaker and hammer differ scott j 5/28/04

Re: Modal results on shaker and hammer differ T Dahling 6/4/04

Slip Frequency - How to calculat David Lopes 5/26/04

Re: Slip Frequency - How to calculat Raid 5/28/04

Re: Slip Frequency - How to calculat 5/27/04

Re: Minimizing AC Induction Motor Slip Article Arne 5/28/04

Re: Slip Frequency - How to calculat Charlie cs2mh@aol.com 5/26/04

Re: Slip Frequency - How to calculat Tony 5/26/04

Acelerometros Wilfredo Loyo 5/25/04

Re: Acelerometros Arne 5/25/04

Back Issues of Sound & Vibration Magazine Bill 5/23/04

Re: Back Issues of Sound & Vibration Magazine Ganti Subba Rao 5/24/04

Re: Back Issues of Sound & Vibration Magazine Bill 6/6/04

Re: Back Issues of Sound & Vibration Magazine Mallik 11/15/04

Re: Back Issues of Sound & Vibration Magazine 11/15/04

Blade passing frequencies boilerfeedpump. Gerard. 5/22/04

Re: Blade passing frequencies boilerfeedpump. Jim P 5/28/04

capturing a Specturm after cutting power. Keith 5/21/04

Re: capturing a Specturm after cutting power. Gerard 5/29/04

Rotor Dynamics With a Moment Unbalance Gregori 5/21/04

Re: It is only in the New inertial theory of a rotor dynamics. Yuriy Zhivotov 5/26/04

High bearing metal temperature, but low vibration Ken 5/20/04

Re: High bearing metal temperature, but low vibration Steven Schultheis 5/21/04

Re: High bearing metal temperature, but low vibration Arne 5/21/04

Re: High bearing metal temperature, but low vibration Ken 5/23/04

Re: High bearing metal temperature, but low vibration Agustin Abaroa Sr 7/3/04

Re: High bearing metal temperature, but low vibration lee y s 5/25/04

Re: High bearing metal temperature, but low vibration 5/25/04

SKF MICROLOG CMVA55/60 Victor Duarte 5/20/04

Re: SKF MICROLOG CMVA55/60 Ken 5/20/04

Re: SKF MICROLOG CMVA55/60 Dave G. 5/20/04

Vibration Analysis Books Chris in Australia 5/20/04

Re: Vibration Analysis Books Ken 5/20/04

Re: Vibration Analysis Books Chris 5/20/04

Re: Vibration Analysis Books 6/28/04

Re: Vibration Analysis Books Arne 5/20/04

Vibration Analysis Books Chris in Australia 5/20/04

coupling factors for multi degree of freedom systems Parshav 5/19/04

Viscous Vibration Damper for Torsional Vibration analysis Williams 5/19/04

Re: Viscous Vibration Damper for Torsional Vibration analysis 11/12/04

Re: Viscous Vibration Damper for Torsional Vibration analysis Arne 5/19/04

Re: Viscous Vibration Damper for Torsional Vibration analysis Ron Hartlen 5/19/04

Re: Viscous Vibration Damper for Torsional Vibration analysis Arne 5/19/04

g's Spike Energy set-up Brad A. Noel 5/18/04

Re: g's Spike Energy set-up Brad Noel 5/18/04

double mounted installation Harry Lijzenga 5/17/04

Re: double mounted installation molrec@hotmail.com 7/10/04

Re: double mounted installation wschel 6/2/04

Re: double mounted installation Arne 5/18/04

Re: double mounted installation Harry 5/18/04

Re: double mounted installation Arne 5/19/04

Re: double mounted installation Harry 5/19/04

anybody ever use csi Fast balance and analyzer to balance driveshafts? b foster 5/17/04

Re: anybody ever use csi Fast balance and analyzer to balance dri... Arne 5/18/04

Making badwill real fast Arne 5/15/04

Datapac 1500 vs. Enpac 1200 Jessy Graham 5/14/04

Re: Datapac 1500 vs. Enpac 1200 Dana 5/30/04

Re: Datapac 1500 vs. Enpac 1200 Brad A Noel @ Saturn Spring Hill Powertrain 5/18/04

Re: Datapac 1500 vs. Enpac 1200 Steve 5/15/04

Prevent Nut/Joint Loosening Under Vibration... Lee Miller 5/14/04

Re: Prevent Nut/Joint Loosening Under Vibration... Ron Hartlen 5/14/04

Re: Prevent Nut/Joint Loosening Under Vibration... 5/14/04

vibration measurements blowers dieselengines Harry Lijzenga, Dutch NAVY 5/13/04

Re: vibration measurements blowers dieselengines willem 6/2/04

Re: vibration measurements blowers dieselengines Agustin Abaroa Sr. bit microprecision, Mexico 5/16/04

Re: vibration measurements blowers dieselengines Arne 5/15/04

Re: vibration measurements blowers dieselengines Gerard. 5/15/04

Re: vibration measurements blowers dieselengines 5/17/04

Re: vibration measurements blowers dieselengines rob 5/13/04

Pump Vibration Craig Van Wyke 5/13/04

Pump vibration Craig Van Wyke 5/13/04

Re: Pump vibration Jim Crowe 5/13/04

Re: Pump vibration Arne 5/13/04

Re: Pump vibration Arne 5/13/04

spares part Nguyen Dinh Man 5/13/04

Re: spares part Vibration Monitor Sentinel 5/13/04

Difference between 6FA and 6FA plus JIban Kakoti, NEEPCO, India 5/13/04

Re: Difference between 6FA and 6FA plus Ken 5/20/04

Help checking a slow turning roll.... B.C. 5/11/04

Re: Help checking a slow turning roll.... Bim 5/12/04

Let me specify a little more.. 5/12/04

Let me specify a little more.. 5/12/04

Re: Help checking a slow turning roll.... Bim 5/12/04

Re: Help checking a slow turning roll.... Arne 5/11/04

Re: Help checking a slow turning roll.... Gerard 5/11/04

Re: Help checking a slow turning roll.... Steve 5/11/04

Re: Help checking a slow turning roll.... Todd 5/11/04

Re: Help checking a slow turning roll.... AB 7/13/04

0.5 x Component Ruston Gas Generator Steve 5/11/04

Re: 0.5 x Component Ruston Gas Generator Adrian 6/2/04

Re: 0.5 x Component Ruston Gas Generator Steve Schultheis 5/11/04

Re: 0.5 x Component Ruston Gas Generator Dusan 5/13/04

Re: 0.5 x Component Ruston Gas Generator steve schultheis 5/13/04

Vertical Turbine Pump Vibration Saikat Majumder 5/11/04

Re: Vertical Turbine Pump Vibration Ken 5/20/04

Re: Vertical Turbine Pump Vibration steven schultheis 5/12/04

Re: Vertical Turbine Pump Vibration Gerard 5/11/04

Re: Vertical Turbine Pump Vibration Alex J 5/11/04

Changing Magnetic Centre and high vibrations Frank 5/8/04

Re: Changing Magnetic Centre and high vibrations Agustin Abaroa Sr. 7/3/04

Lubrication to cut down on Shaft Currents Keith 5/7/04

Re: Lubrication to cut down on Shaft Currents Gerard 5/13/04

Re: Lubrication to cut down on Shaft Currents Charlie cs2mh@aol.com 5/10/04

Acoustic emission hydrophone sensor for machine monitoring Al 5/6/04

Re: Acoustic emission hydrophone sensor for machine monitoring dr.becker@flender-cm.com 5/9/04

Entek Emonitor Odyssey vs. CSI RBM ware Don Clark 5/6/04

Re: Entek Emonitor Odyssey vs. CSI RBM ware 5/11/04

Re: Entek Emonitor Odyssey vs. CSI RBM ware Ron Stiemsma 5/7/04

Condenser Tube Leak Rafael 5/5/04

Re: Condenser Tube Leak Robert Mechem 8/17/04

Re: Condenser Tube Leak Robert Mechem 8/17/04

Re: Condenser Tube Leak Walt 5/5/04

Blade order whirling (lateral vibration) for slow speed propeller shaft Bjørn Vartdal 5/5/04

Re: Blade order whirling (lateral vibration) for slow speed prope... rob 5/6/04

Re: Blade order whirling (lateral vibration) for slow speed p... Arne 5/6/04

Re: Blade order whirling (lateral vibration) for slow speed p... willem 6/2/04

Re: Blade order whirling (lateral vibration) for slow speed p... rob 5/11/04

Re: Blade order whirling (lateral vibration) for slow speed prope... Arne 5/5/04

Re: Blade order whirling (lateral vibration) for slow speed p... Bjørn Vartdal 5/19/04

Re: CSI 2130 & MasterTrend Frank 5/14/04

Re: CSI 2130 & MasterTrend Arne 5/5/04

Re: CSI 2130 & MasterTrend P, Pesta 5/19/04

Vibration increases with temp. increase on ten stage pump. Chris 5/3/04

Re: Vibration increases with temp. increase on ten stage pump. Gerard. 5/6/04

Re: Vibration increases with temp. increase on ten stage pump. Arne 5/4/04

Re: Vibration increases with temp. increase on ten stage pump. Chris 5/27/04

Rotating Accelerometers for Bearing Fault Detection Paul 5/3/04

Re: Rotating Accelerometers for Bearing Fault Detection Dan Bradley 5/4/04

Re: Rotating Accelerometers for Bearing Fault Detection Dnicejr 5/4/04

Re: Rotating Accelerometers for Bearing Fault Detection Arne 5/4/04

Re: Rotating Accelerometers for Bearing Fault Detection Arne 5/3/04

Re: Rotating Accelerometers for Bearing Fault Detection Dave G. 5/3/04

Re: Rotating Accelerometers for Bearing Fault Detection Mike 5/3/04

two plane balancing pavan 5/2/04

Re: two plane balancing hazem1113@engineer.com 5/13/04

Re: two plane balancing Arne 5/2/04

Large Motor - Excessive axial rotor travel pjpiontek@ameren.com 5/1/04

Re: Large Motor - Excessive axial rotor travel wxysalah@hotmail.com 1/15/05

Re: Large Motor - Excessive axial rotor travel Eduardo Murphy 5/2/04

Balancing a rotor & precision specs Mike (Institute member) 4/29/04

Re: Balancing a rotor & precision specs Mike (Institute member) 5/5/04

Re: Balancing a rotor & precision specs Mike (Institute member) 5/5/04

Re: Balancing a rotor & precision specs Eduardo Murphy 4/30/04

Re: Balancing a rotor & precision specs Arne 4/30/04

Re: Balancing a rotor & precision specs Eduardo Murphy 5/2/04

Re: Balancing a rotor & precision specs Arne 5/2/04

Re: Balancing a rotor & precision specs Arne 4/29/04

Re: Balancing a rotor & precision specs 5/11/04

IRD Fast Track coryrousell@gmrelectric.com 4/29/04

Re: IRD Fast Track directsale@excite.com 8/2/04

Re: IRD Fast Track 5/7/04

Re: IRD Fast Track Mike T 5/27/04

Re: IRD Fast Track Cory 5/11/04

id fan high axial vibration coupled with radial vibration sandip_sarma@yahoo.com 4/29/04

Re: id fan high axial vibration coupled with radial vibration 7/31/04

Re: id fan high axial vibration coupled with radial vibration james phoon 7/4/04

Re: id fan high axial vibration coupled with radial vibration Ken 5/21/04

Re: id fan high axial vibration coupled with radial vibration precimax@icenet.net 5/9/04

Re: id fan high axial vibration coupled with radial vibration Slahadin ashair - ZADCO-UAE 5/1/04

acceleration alarms monty 4/29/04

300Hz on DC Motors Dave Ditchfield 4/28/04

Re: 300Hz on DC Motors Eduardo Murphy 4/29/04

Re: 300Hz on DC Motors Dave Ditchfield, Shotton Paper 4/30/04

Re: 300Hz on DC Motors Arne 4/30/04

Re: 300Hz on DC Motors Dave Ditchfield, Shotton Paper 5/4/04

Vertical fan vibration rudy@mace-inc.com 4/27/04

Re: Vertical fan vibration Walt 4/28/04

300 HP pump - Help me with basic velocity vs. displacement calculation Robert 4/27/04

Re: 300 HP pump - Help me with basic velocity vs. displacement ca... Dana 5/4/04

Re: 300 HP pump - Help me with basic velocity vs. displacement ca... Arne 4/27/04

Re: 300 HP pump - Help me with basic velocity vs. displacement ca... Walt 4/27/04

followup - Re: 300 HP pump - Help me with basic velocity vs. displacemen... Robert 4/28/04

Re: followup - Re: 300 HP pump - Help me with basic velocity vs. ... David Eason 4/29/04

Re: followup - Re: 300 HP pump - Help me with basic velocity vs. ... Santiago 4/28/04

IRD 1250 Jim Murdock 4/27/04

MOVIPACK as VIBRALOG II (Metrix Instrument) Puji (electrical@styrindo.co.id) 4/27/04

Screw Air Compressor dcarie@champlabs.com 4/26/04

Re: Screw Air Compressor Walt 4/27/04

Re: Screw Air Compressor dcarie@champlabs.com 4/28/04

planetary gear experiments fakher(fa_attt@yahoo.fr) 4/24/04

Re: planetary gear experiments Willem 5/4/04

MOVIPACK (01 dB-Stell) data collector/analyzer Puji (electrical@styrindo.co.id) 4/23/04

MOVIPACK (01 dB-Stell) data collector/analyzer Puji 4/23/04

Blower vibration sumit.c@navy.mi.th 4/23/04

Re: Blower vibration Jim Crowe 4/26/04

Re: Blower vibration Peggy T 4/26/04

Re: Blower vibration the squid 4/23/04

Re: Blower vibration ExBubblehead 4/23/04

450 HP overhung rotor imbalance Vic 4/23/04

Re: 450 HP overhung rotor imbalance Eduardo Murphy 4/23/04

Re: 450 HP overhung rotor imbalance Vic 4/24/04

Re: 450 HP overhung rotor imbalance Vic 4/23/04

Re: 450 HP overhung rotor imbalance Eduardo Murphy 4/24/04

Re: 450 HP overhung rotor imbalance Vic 4/24/04

Re: 450 HP overhung rotor imbalance 4/25/04

compatibility of Di225D vibration data collector with motor monitor ad1969@rediffmail.com, akhilagarwal@singrauli.ntpc.co.in 4/22/04

Re: compatibility of Di225D vibration data collector with motor m... Dan Bradley 4/23/04

slow speed machins vibration measurement ad1969@rediffmail.com, akhilagarwal@singrauli.ntpc.co.in 4/22/04

Re: slow speed machins vibration measurement dr.becker@flender-cm.com 5/9/04

Magnetic unbalance in a generator HP Nesse 4/22/04

Re: Magnetic unbalance in a generator Agustin Abaroa Sr 7/3/04

Re: Magnetic unbalance in a generator Cory 7/1/04

Re: Magnetic unbalance in a generator rob 4/22/04

Re: Magnetic unbalance in a generator Arne 4/22/04

Re: Magnetic unbalance in a generator rob 5/3/04

Re: Magnetic unbalance in a generator Jerome 5/6/04

Re: Magnetic unbalance in a generator 5/6/04

Re: Magnetic unbalance in a generator zmazur@cableonline.com.mx 7/31/04

Re: Magnetic unbalance in a generator zmazur@cableonline.com.mx 7/31/04

Motor Current Signature Analysis Vince Woodkotch 4/21/04

Re: Motor Current Signature Analysis Aditya Korde-diatech@vsnl.com 4/28/04

Re: Motor Current Signature Analysis Dan Bradley 4/23/04

data pac 1500 Larry 4/20/04

Re: data pac 1500 Ron Stiemsma 4/29/04

Re: data pac 1500 Dana 4/26/04

ISO Limits of Diesel Generator Sets er_siddu@yahoo.com 4/20/04

Re: ISO Limits of Diesel Generator Sets Willem 5/5/04

Re: ISO Limits of Diesel Generator Sets Arne 5/8/04

Re: ISO Limits of Diesel Generator Sets rmooij-at-technofysica.nl 4/22/04

Re: ISO Limits of Diesel Generator Sets Arne 4/27/04

Re: ISO Limits of Diesel Generator Sets 5/3/04

Re: ISO Limits of Diesel Generator Sets Arne 4/20/04

Re: ISO Limits of Diesel Generator Sets er_siddu@yahoo.com 4/20/04

Motor Current Unbalance er_siddu@yahoo.com 4/20/04

FAG Bearing 7421P Keith 4/16/04

Re: FAG Bearing 7421P 4/18/04

Re: FAG Bearing 7421P Keith 4/16/04

Re: FAG Bearing 7421P Dana 4/26/04

Gear box vibrations during hot restart Thomas Kurian 4/14/04

Re: Gear box vibrations during hot restart Arne 4/15/04

Re: Gear box vibrations during hot restart Thomas Kurian 4/15/04

Re: Gear box vibrations during hot restart Thomas Kurian 4/15/04

Re: Gear box vibrations during hot restart Arne 4/16/04

Electric Motor Info Jon 4/14/04

Re: Electric Motor Info Arne 4/14/04

vibration in frick compressor brent 4/13/04

Re: vibration in frick compressor wizard 4/24/04

Re: vibration in frick compressor MachineryWatch 4/20/04

Re: vibration in frick compressor brent 4/21/04

vibration damping in rifle barrels Ken Recker 4/8/04

Re: vibration damping in rifle barrels Tom Brady 3/21/05

ird mechanalysis 554 kathyd@det-ejatc.org 4/7/04

Re: ird mechanalysis 554 5/31/04

Re: ird mechanalysis 554 vmatveev@canatal.com 7/26/04

Bently Data Manager 2000 Joe 4/5/04

Re: Bently Data Manager 2000 Ken 5/21/04

New Inertial Theory of Rotor Dynamics Yuriy ZXhivotov 4/5/04

Vibration Training/Institute Nihar 4/3/04

Re: Vibration Training/Institute Majid Solook 1/8/05

Delval centrifugal compressor (barrel) MYQ-ARAMCO 4/2/04

Re: Delval centrifugal compressor (barrel) Alex J 4/6/04

Re: Delval centrifugal compressor (barrel) Alex J 4/6/04

Re: Delval centrifugal compressor (barrel) Steven Schultheis 4/5/04

prism4 hiearchy to route brent 4/2/04

Re: prism4 hiearchy to route Mike Barnett 4/2/04

Re: prism4 hiearchy to route Dave G. www.reliabilitydirect.com 4/2/04

induction motor MYQ 4/2/04

Re: induction motor Eduardo Murphy 4/2/04

Re: induction motor MYQ 4/2/04

Deleval Gas Compressor. MYQ 4/2/04

building specta Ray C 4/1/04

Acceleration envelope peter 4/1/04

Re: Acceleration envelope Arne 4/1/04

SKF in Japan Deba 3/31/04

Re: SKF in Japan Dan Bradley 4/5/04

Bias Voltage shed 3/31/04

Re: Bias Voltage Arne 4/1/04

Ultrasonic Flow Detection Dom 3/31/04

Re: Ultrasonic Flow Detection DavidM 3/31/04

Re: Ultrasonic Flow Detection Dom 3/31/04

Re: Ultrasonic Flow Detection Hugh Hackett 4/6/04

Velocity and Displacement Jon 3/29/04

Re: Velocity and Displacement Mike C 3/31/04

Re: Velocity and Displacement Arne 3/31/04

Re: Velocity and Displacement 3/30/04

Re: Velocity and Displacement Arne 3/30/04

Re: Velocity and Displacement Jon 3/30/04

Re: Velocity and Displacement Arne 3/30/04

Commtest Danny 3/29/04

Re: Commtest Duane Dobson - Reliability Systems Technologies 4/13/04

Re: Commtest Mike Cooney 3/30/04

Re: Commtest David G. www.ReliabilityDirect.com 3/29/04

High vibration on Motor NDE bearing for Vertical Motor jacob 3/29/04

Re: High vibration on Motor NDE bearing for Vertical Motor Eduardo Murphy 3/29/04

Re: High vibration on Motor NDE bearing for Vertical Motor Arne 3/29/04

Re: High vibration on Motor NDE bearing for Vertical Motor Slahadin Asahir 5/1/04

Re: High vibration on Motor NDE bearing for Vertical Motor 5/1/04

BEARING TESTING Mish 3/26/04

Re: BEARING TESTING Walt 3/27/04

Re: BEARING TESTING Mish 3/28/04

magnetic coupling andy 3/25/04

Re: magnetic coupling Walt 3/25/04

1050Hz vibrations 6056@thrijswijk.nl 3/25/04

Re: 1050Hz vibrations Gerard 3/29/04

Re: 1050Hz vibrations Arne 3/29/04

Re: 1050Hz vibrations Walt 3/25/04

Re: 1050Hz vibrations Arne 3/27/04

Slow Speed Equipment 30 RPM and Below Steve 3/24/04

Re: Slow Speed Equipment 30 RPM and Below Walt 3/25/04

Axial Compressor (Turbo Blower) Monitoring System Gordon Lees 3/23/04

Re: Axial Compressor (Turbo Blower) Monitoring System Arne 3/27/04

Motor Grease Fitting JPF 3/23/04

Re: Motor Grease Fitting Arne 3/27/04

manufacturer of transmission line vibration recorder Tony 3/23/04

Tolhurst centrifuge bearings Jeremy 3/23/04

Re: Tolhurst centrifuge bearings Arne 3/27/04

0.375 Running Speed Vibration Joe 3/22/04

Re: 0.375 Running Speed Vibration BN 3/22/04

Re: 0.375 Running Speed Vibration Steven Schultheis 3/22/04

Re: 0.375 Running Speed Vibration MachineryWatch 3/22/04

Hyper Vibration Blade Jamal Qassim : Interpolmiddleast@yahoo.com 3/20/04

Re: Hyper Vibration Blade Alex J 3/23/04

Air Compressor Jim Powell 3/19/04

Re: Air Compressor Arne 3/19/04

Arne E-mail aali@midom.com.eg 3/19/04

Grease bearing ball pass frequency chan-cheong.siew@bocedwards.com 3/18/04

2115 Compatibility Anonymous 3/18/04

Re: 2115 Compatibility Arne 3/18/04

Re: 2115 Compatibility Arne 3/18/04

High Vibration in Pellet Conveying Blower Bhaskar Poojary 3/18/04

Re: High Vibration in Pellet Conveying Blower Arne 3/18/04

What append at 1.22X centrifugal pump bunlue@jbsit.com 3/17/04

Re: What append at 1.22X centrifugal pump Arne 3/18/04

Re: What append at 1.22X centrifugal pump bunlue@jbsit.com 3/19/04

Re: What append at 1.22X centrifugal pump dan 3/17/04

Re: What append at 1.22X centrifugal pump Dan 3/17/04

Fan Build-up David Furey 3/17/04

Re: Fan Build-up Wally Barth 4/16/04

Re: Fan Build-up Alex J 3/22/04

Re: Fan Build-up Al Miller, Buffalo HT Fan Co. 3/21/04

Re: Fan Build-up DavidM 3/18/04

Re: Fan Build-up Steve Schultheis 3/18/04

Re: Fan Build-up Michael Titone 3/17/04

Re: Fan Build-up Arne 3/18/04

High Noise on the Elec. Motors aali@midom.com.eg 3/16/04

Re: High Noise on the Elec. Motors Shaker 3/18/04

Re: High Noise on the Elec. Motors aali@midom.com.eg 3/19/04

Looking for equipment John Walker 3/16/04

Re: Looking for equipment Arne 3/16/04

from another forum lxchen@actog.com 3/15/04

Re: from another forum Steve Schultheis 3/16/04

Steam turbine has got 1xRPM after trip Arne 3/15/04

Re: Steam turbine has got 1xRPM after trip lxchen@actog.com 3/15/04

Large gearbox resonance Testtech 3/14/04

Re: Large gearbox resonance Testtech 3/21/04

Re: Large gearbox resonance Viktor718@aol.com 3/20/04

Re: Large gearbox resonance Arne 3/14/04

Trired sond 855 gearbox noisy Odon 3/12/04

Re: Trired sond 855 gearbox noisy dr.becker@flender-cm.com 4/16/04

Re: Trired sond 855 gearbox noisy Arne 3/14/04

Re: Trired sond 855 gearbox noisy Odon 3/14/04

BPF & Rub Condition Swany, UK 3/10/04

Re: BPF & Rub Condition Peggy T. 3/12/04

Re: BPF & Rub Condition Arne 3/11/04

Article 5479 mythemmohi@yahoo.com 3/9/04

21x rpm peak in our luboil reciprocating pump coupled to a motor with lovejoy coupling. Motor axial vibration . chevvuri@rediffmail.com 3/6/04

Loose blade FFT analysis Swany 3/5/04

Re: Loose blade FFT analysis Peggy T. 3/5/04

Blade/Vane pass frequency & DC Motor Swany 3/5/04

PTO-Generator vibration. HP Nesse 3/5/04

Re: PTO-Generator vibration. Alex J 3/9/04

Re: PTO-Generator vibration. Arne 3/5/04

Hansen Gear box Dino 3/4/04

Re: Hansen Gear box dbeebe@hansenna.com 3/14/04

Re: Hansen Gear box Eduardo Murphy 3/6/04

Re: Hansen Gear box a vibe guy 3/6/04

Re: Hansen Gear box stephens66 10/6/04

Re: Hansen Gear box Walt Strong 3/4/04

Re: Hansen Gear box Dino 3/6/04

Cat III training course roy.gariepy@dorlastan.com 3/4/04

Re: Cat III training course Nelson Watson 3/19/04

Cavitation in Bottoms pump George 3/4/04

Re: Cavitation in Bottoms pump Carmelo Silva 7/9/04

Re: Cavitation in Bottoms pump sasaki 3/4/04

Re: Cavitation in Bottoms pump 3/4/04

Severe vibrations 2X on 45KVA Motor Alternator Rob F. 3/4/04

Re: Severe vibrations 2X on 45KVA Motor Alternator Viktor718@aol.com 3/20/04

Water ingress in Lube oil of Diesel Engines Muhammad Yahya Khan 3/4/04

Re: Water ingress in Lube oil of Diesel Engines d3520906@taipower.com.tw 5/27/04

Re: Water ingress in Lube oil of Diesel Engines Arne 3/4/04

inlet steam strainer to HP Turbine chris maharaj 3/3/04

Dry Coupling benderb@firstenergycorp.com 3/1/04

Re: Dry Coupling BN 3/2/04

Re: Dry Coupling Brad 3/3/04

Re: Dry Coupling 3/1/04

Adjusting while running to decrease vibration Phil Standridge 2/29/04

Re: Adjusting while running to decrease vibration Phil Standridge 3/1/04

Adjusting while running to decrease vibration Phil Standridge 2/29/04

Re: Adjusting while running to decrease vibration 3/1/04

Re: Adjusting while running to decrease vibration Arne 3/1/04

Monitoring Vibrating Conveyor Keith Mosier 2/28/04

Re: Monitoring Vibrating Conveyor Al Miller, Buffalo HT Fan 3/21/04

Wigner-Ville distribution fa (fa_attt@yahoo.fr) 2/28/04

Re: Wigner-Ville distribution vgarzani 3/15/04

900HP sleeve bearing critical speed? uriah.laing@ps.ge.com 2/25/04

Re: 900HP sleeve bearing critical speed? Guillermo Urquizo 2/25/04

Re: 900HP sleeve bearing critical speed? Rodney 2/25/04

Re: 900HP sleeve bearing critical speed? Arne 2/27/04

Fluid Drive - High non sychronous axial vibration pjpiontek@ameren.com 2/23/04

Re: Fluid Drive - High non sychronous axial vibration nj 11/25/04

Ref.2 Dual Channel Analyzer features? Ashraf_fat@myway.com 2/23/04

Dual Channel Analyzer features? Ashraf_fat@myway.com 2/23/04

Re: Dual Channel Analyzer features? Guillermo Urquizo 2/25/04

Re: Dual Channel Analyzer features? lxchen@actog.com 2/23/04

Re: Dual Channel Analyzer features? lxchen@actog.com 2/23/04

motor bearing greasing alan 2/20/04

Re: motor bearing greasing lxchen@actog.com 2/23/04

Re: motor bearing greasing DavidM 2/20/04

Re: motor bearing greasing a vibe guy 2/28/04

Re: motor bearing greasing Arne 2/23/04

Re: motor bearing greasing DavidM 2/24/04

Re: motor bearing greasing alan 2/21/04

Re: motor bearing greasing Gerard 2/20/04

Towice Elec. Line Frequency Ashraf_fat@myway.com 2/20/04

Re: Towice Elec. Line Frequency Ross Marlow 4/19/04

Re: Towice Elec. Line Frequency Jim 4/9/04

Re: Towice Elec. Line Frequency Guilermo Urquizo 2/20/04

Re: Towice Elec. Line Frequency Arne 2/20/04

Re: Towice Elec. Line Frequency Arne 2/20/04

Bull Gear Frequency Carryover onto a Pinion Franko 2/20/04

Vibration of elevated railroads and adjacent structures Chris Julun, cjulun@transitchicago.com 2/18/04

Re: Vibration of elevated railroads and adjacent structures Walt 2/18/04

temperture alerts and alarms for bearing housings chris maharaj 2/18/04

installation of an online vibration monitoring system chris maharaj 2/18/04

Re: installation of an online vibration monitoring system MachineryWatch 2/18/04

Re: installation of an online vibration monitoring system David Gallagher 2/18/04

Unbalance virupaksha@indiatimes.com 2/18/04

Re: Unbalance Guillermo Urquizo 2/20/04

Re: Unbalance Arne 2/18/04

Wavelet Analysis silvalexandre@yahoo.com 2/17/04

Re: Wavelet Analysis Alan F 2/23/04

Re: Wavelet Analysis Sasaki 2/26/04

Re: Wavelet Analysis Guillermo Urquizo 2/20/04

Re: Wavelet Analysis Ron Hartlen 2/19/04

Re: Wavelet Analysis Sasaki 2/17/04

Bearing Frequencies Neil 2/15/04

Re: Bearing Frequencies Arne 2/16/04

Predicting Remaining Bearing Life based on Vibration Velocity samduck1@hotmail.com 2/15/04

Re: Predicting Remaining Bearing Life based on Vibration Velocity Arne 2/15/04

Re: Predicting Remaining Bearing Life based on Vibration Velo... Shane 3/15/04

Re: Predicting Remaining Bearing Life based on Vibration Velo... 2/26/04

Re: Predicting Remaining Bearing Life based on Vibration Velo... silvalexandre@yahoo.com 2/17/04

Re: Predicting Remaining Bearing Life based on Vibration Velo... Neil 2/15/04

Vibration Severity Ranges for Cooling Tower Components. samduck1@hotmail.com 2/15/04

Re: Vibration Severity Ranges for Cooling Tower Components. Arne 2/15/04

required alarm and trip for high radial vibration asigit@badaklng.co.id 2/13/04

Re: required alarm and trip for high radial vibration Steven Schultheis 2/17/04

Re: required alarm and trip for high radial vibration 2/16/04

Re: required alarm and trip for high radial vibration Arne 2/14/04

Severe vibrations 2X on 45KVA Motor Alternator Rob F. 2/13/04

Article 5373 2/13/04

Balance using the strobe light Vibration Guy 2/10/04

Re: Balance using the strobe light samduck1@hotmail.com 2/15/04

Re: Balance using the strobe light Peggy T 2/11/04

Re: Balance using the strobe light Vibration Guy 2/11/04

Re: Balance using the strobe light Eduardo Murphy 2/11/04

Re: Balance using the strobe light Vibration Guy 2/11/04

Re: Balance using the strobe light Arne 2/11/04

Re: Balance using the strobe light Thomas Purackal 2/10/04

Bently probes Tony 2/9/04

Rotordynamic Analysis for Mono-rotors and FEM Application Saif Al-Farsi-Petroleum Development Oman 2/8/04

Consulting companies dealt with vibration isolation systems for ships equipment Viktor718@aol.com 2/5/04

Machine Layup Scott 2/5/04

Re: Machine Layup DavidM 2/10/04

Re: Machine Layup Peggy T 2/9/04

Re: Machine Layup Abdul Charmi 2/6/04

Frequency of data collection sander1@rohmhaas.com 2/4/04

Re: Frequency of data collection Arne 2/4/04

IRD MODEL 246 Mario 2/3/04

Re: IRD MODEL 246 Arne 2/3/04

Re: IRD MODEL 246 msimm@entelchile.net 8/19/04

Re: IRD MODEL 246 saeed 6/8/04

ISO standar A. Luz 2/3/04

Re: ISO standar Arne 2/3/04

Recycle gas compressor: High vibration at low speed Ken 2/2/04

Re: Recycle gas compressor: High vibration at low speed Steve Schultheis 2/3/04

Re: Recycle gas compressor: High vibration at low speed Ken 2/3/04

Re: Recycle gas compressor: High vibration at low speed Steven Schultheis 2/5/04

Fillters for vibration study Gibbson 2/1/04

Re: Fillters for vibration study Arne 2/2/04

Vibration standard for naval ship sumitc@navy.mi.th 1/31/04

Re: Vibration standard for naval ship Charlie Hart 3/28/04

Re: Vibration standard for naval ship Ken 2/12/04

Re: Vibration standard for naval ship Gary 2/4/04

Re: Vibration standard for naval ship Arne 2/1/04

Re: Vibration standard for naval ship Ali Al-Shurafa 2/1/04

Re: Vibration standard for naval ship vibratek@vibratek.com.tr 6/14/04

Re: Vibration standard for naval ship Arne 2/2/04

Re: Vibration standard for naval ship rob @ technofysica.nl 2/10/04

Vibration Standard for LM2500 Gas Turbine Ian McMillan 1/31/04

Re: Vibration Standard for LM2500 Gas Turbine Arne 1/31/04

Re: Vibration Standard for LM2500 Gas Turbine Ian McMillan 1/31/04

Re: Vibration Standard for LM2500 Gas Turbine slahadin, from Zadco UAE 6/4/04

Re: Vibration Standard for LM2500 Gas Turbine Greg 2/5/04

Re: Vibration Standard for LM2500 Gas Turbine Arne 1/31/04

Octave analysis Eneko 1/30/04

Re: Octave analysis Gervais charron 5/13/04

Re: Octave analysis Peggy T 1/30/04

Re: Octave analysis Arne 1/30/04

Re: Octave analysis Arne 1/31/04

Re: Octave analysis ron hartlen 1/30/04

Re: Octave analysis Peggy T 1/30/04

Newspaper Printers RRock 1/29/04

Re: Newspaper Printers Peggy T 2/2/04

Re: Newspaper Printers Peggy T 1/30/04

Re: Newspaper Printers DavidM 1/30/04

Re: Newspaper Printers Arne 1/29/04

Signal Modulation M.Rgeai 1/28/04

Re: Signal Modulation Rodney 1/28/04

Re: Signal Modulation Arne 1/28/04

Signal Modulation M.Rgeai 1/28/04

Re: Signal Modulation Arne 1/28/04

Downstream Mechanical Fault Detection Using Motor Current Signature Analysis M. Rgeai 1/28/04

Re: Downstream Mechanical Fault Detection Using Motor Current Sig... Arne 1/28/04

Vibration Monitoring - Transmitters vs. Analyzers Gordon Lees 1/26/04

Re: Vibration Monitoring - Transmitters vs. Analyzers David Poffenbarger 1/30/04

Re: Vibration Monitoring - Transmitters vs. Analyzers Dave Cutnaw 1/30/04

Re: Vibration Monitoring - Transmitters vs. Analyzers Michael Titone 1/28/04

Shaft Currents Keith 1/26/04

Re: Shaft Currents B. Galano 3/17/05

Re: Shaft Currents samduck1@hotmail.com 2/15/04

Re: Shaft Currents Walt 1/26/04

Re: Shaft Currents Arne 1/26/04

Rolling element bearing faults R. F. 1/25/04

Re: Rolling element bearing faults Arne 1/26/04

Sullair TS 32 250HP Tandem two-stage compressor Attapulgus 1/24/04

Data collector manufactures Eneko 1/23/04

Re: Data collector manufactures Arne 1/23/04

Low vibration in Centrifugal fans L.E. 1/22/04

Re: Low vibration in Centrifugal fans dnk 2/2/04

Re: Low vibration in Centrifugal fans DavidM 1/23/04

Re: Low vibration in Centrifugal fans Walt 1/23/04

Re: Low vibration in Centrifugal fans Eduardo Murphy 1/22/04

Re: Low vibration in Centrifugal fans L.E. 1/23/04

Re: Low vibration in Centrifugal fans Eduardo Murphy 1/26/04

Re: Low vibration in Centrifugal fans Arne 1/22/04

Re: Low vibration in Centrifugal fans L.E. 1/22/04

Re: Low vibration in Centrifugal fans Arne 1/23/04

piezoelectric actuator Bala 1/22/04

Re: piezoelectric actuator Johannes 10/25/04

yankee gear box Andrea 1/21/04

Re: yankee gear box Johannes 10/25/04

Re: yankee gear box Mark 5/14/04

Re: yankee gear box Arne 1/21/04

Sound testing B Hale 1/20/04

Re: Sound testing gc.vannimwegen@quicknet.nl 1/22/04

Re: Sound testing Walt 1/20/04

shaft run out Abdul Charmi 1/20/04

Re: shaft run out Steve Scultheis 1/20/04

Re: shaft run out Eduardo Murphy 1/20/04

Re: shaft run out Edward 9/1/04

Re: shaft run out Arne 1/20/04

Re: shaft run out Eduardo Murphy 1/20/04

Re: shaft run out Arne 1/20/04

Re: shaft run out Eduardo Murphy 1/20/04

Re: shaft run out Steve Schultheis 1/21/04

Re: shaft run out Arne 1/21/04

Re: shaft run out Frank H. 1/20/04

vibration specs for hand held electronic devices Long Nguyen 1/19/04

vibration specs for hand held electronic devices Long Nguyen 1/19/04

Re: vibration specs for hand held electronic devices Ali Al-Shurafa 1/21/04

Pump vibration at 21x running speed gerard.vannimwegen@quicknet.nl 1/19/04

Re: Pump vibration at 21x running speed Talmadge Ward 3/9/04

Re: Pump vibration at 21x running speed gc.vannimwegen@quicknet.nl 1/22/04

Re: Pump vibration at 21x running speed gc.vannimwegen@quicknet.nl 1/22/04

Inquiry for Balance Machine western_ahmadsaleem@yahoo.co.in 1/19/04

Re: Inquiry for Balance Machine David G, www.reliabilitydirect.com 1/19/04

Re: Inquiry for Balance Machine David G, www.reliabilitydirect.com 1/19/04

Re: Inquiry for Balance Machine Arne 1/19/04

Overhung Vibration phenomena?! Robert 1/16/04

Re: Overhung Vibration phenomena?! Eduardo Murphy 1/16/04

Re: Overhung Vibration phenomena?! Arne 1/16/04

New 3600rpm motor has a beat or a pulse Jeff Schiller 1/15/04

Re: New 3600rpm motor has a beat or a pulse Arne 1/15/04

Re: New 3600rpm motor has a beat or a pulse JimP 1/19/04

Outboard/Inboard DaveC 1/15/04

Re: Outboard/Inboard Arne 1/15/04

Natural frequency measurement methods Bala(bkarunamurthy@hotmail.com) 1/15/04

Polytec-Rotational Vibrometer Ken 1/13/04

Re: Polytec-Rotational Vibrometer willem 2/11/04

Polytec-Rotational Vibrometer Ken 1/13/04

Pole pass amplitudes Matt Hill 1/13/04

Percentage High Vibration Tags rajendra_a_zope@ril.com 1/12/04

Re: Percentage High Vibration Tags Arne 1/12/04

High Axial Vibration at Motor NDE Brg of PA fan N.SatyaNarayana(nalla_satyanarayana@rediffmail.com 1/11/04

Re: High Axial Vibration at Motor NDE Brg of PA fan skmrao 2/3/04

Re: High Axial Vibration at Motor NDE Brg of PA fan Bill 1/14/04

Re: High Axial Vibration at Motor NDE Brg of PA fan Arne 1/12/04

Re: High Axial Vibration at Motor NDE Brg of PA fan 1/12/04

Re: High Axial Vibration at Motor NDE Brg of PA fan Ken 1/12/04

Sandor M. proactiva@telesat.com.co 1/10/04

Re: Sandor M. INFORMATION 9/14/04

Re: Sandor M. Dave G. www.reliabilitydirect.com 1/10/04

Re: Sandor M. Arne 1/11/04

Analysis Parameters sinectica 1/9/04

Re: Analysis Parameters Dave G. www.reliabilitydirect.com 1/9/04

Re: Analysis Parameters Arne 1/9/04

Re: Analysis Parameters David G. www.reliabilitydirect.com 1/10/04

Re: Analysis Parameters Arne 1/9/04

6-pole motor fault? Pheadrus 1/9/04

Re: 6-pole motor fault? Arne 1/9/04

Re: 6-pole motor fault? Pheadrus 1/12/04

Spike Energy Eneko 1/9/04

Re: Spike Energy Arne 1/9/04

Acceleration Parameters Dom 1/8/04

Re: Acceleration Parameters John 1/12/04

Re: Acceleration Parameters 1/21/04

Re: Acceleration Parameters john 1/27/04

Piping Vibration Acceptance Criterion David Stevens IEng MIIE(mech) 1/8/04

Re: Piping Vibration Acceptance Criterion Ken 1/8/04

Raised Tennis Court Vibration Criteria bruce.danziger@arup.com 1/6/04

Laser Tach Sensor B. Evans TWMC 1/6/04

Re: Monarch Instruments Data 1/11/04

Re: Laser Tach Sensor Mark Jordan 1/11/04

Re: Laser Tach Sensor David Gallagher 1/7/04

Is this true Neil C 1/4/04

Re: Is this true Steve 1/6/04

Re: Is this true MachineryWatch 1/4/04

Re: Is this true, sure, but . . Arne 1/5/04

COMPRO ANALIZADOR DE VIBRACIONES alejandro chai 1/3/04

Re: COMPRO ANALIZADOR DE VIBRACIONES Dave G. www.reliabilitydirect.com 1/5/04

Re: COMPRO ANALIZADOR DE VIBRACIONES TAM 1/5/04

Re: COMPRO ANALIZADOR DE VIBRACIONES Arne 1/4/04

Re: COMPRO ANALIZADOR DE VIBRACIONES Arne 1/4/04

balance machine specifications N.SatyaNarayana(nalla_satyanarayana@rediffmail.com 1/3/04

Re: balance machine specifications gc.vannimwegen@quicknet.nl 1/22/04

Date Problem with CSI mastertrend Brad T 1/2/04

Re: Date Problem with CSI mastertrend tone 1/19/04

Re: Date Problem with CSI mastertrend 3/24/04

Re: Date Problem with CSI mastertrend Arne 1/3/04

Re: Date Problem with CSI mastertrend Brad T 1/3/04

Re: Date Problem with CSI mastertrend Arne 1/4/04

Re: Date Problem with CSI mastertrend Brad T 1/3/04

Re: Date Problem with CSI mastertrend arne 1/4/04

Re: Date Problem with CSI mastertrend lars 1/6/04

ZDI - Level G6 Balancing Spec David Furey 1/2/04

Re: ZDI - Level G6 Balancing Spec Arne 1/2/04

vwf daren clarke 12/30/03

boxway vs linear motion guides TomSpin@msn.com 12/28/03

Torsional analysis/Presure transducers & Rotor dynamic software Ken 12/26/03

Re: Torsional analysis/Presure transducers & Rotor dynamic software Phil Copp @ Copp-Tek 2/3/04

Re: Torsional analysis/Presure transducers & Rotor dynamic software Steve Schultheis 1/6/04

Re: Torsional analysis/Presure transducers & Rotor dynamic so... MachineryWatch 1/6/04

Re: Torsional analysis/Presure transducers & Rotor dynamic so... Steve Schultheis 1/8/04

Re: Torsional analysis/Presure transducers & Rotor dynamic so... Ken 1/11/04

Re: Torsional analysis/Presure transducers & Rotor dynamic so... Wiriton 5/7/04

Re: Torsional analysis/Presure transducers & Rotor dynamic so... Wiriton 5/7/04

Rotor dynamics software Malcolm Leader 12/31/03

Torsional Vibration Analysis of High speed spindle wheel dylan_fc@yahoo.com.sg 12/26/03

SUB SYNCHRONOUS VIBRATIONS IN ELECTRIC MOTORS SYED ALI HUSSAIN 12/25/03

Re: SUB SYNCHRONOUS VIBRATIONS IN ELECTRIC MOTORS Phillip Standridge 1/12/04

Re: SUB SYNCHRONOUS VIBRATIONS IN ELECTRIC MOTORS Walt 12/25/03

Re: SUB SYNCHRONOUS VIBRATIONS IN ELECTRIC MOTORS Ali Al-Shurafa 12/25/03

Re: SUB SYNCHRONOUS VIBRATIONS IN ELECTRIC MOTORS 12/25/03

vibration analysis saidam@gupco.net 12/23/03

WINDOWS XP & ODYSSEY CONFLICT chucks@fyi.net 12/17/03

Re: WINDOWS XP & ODYSSEY CONFLICT Neil 12/28/03

Re: WINDOWS XP & ODYSSEY CONFLICT chucks@fyi.net 2/20/04

Motor Defect? Steve 12/17/03

Re: Motor Defect? Syed Ali Hussain 12/25/03

Re: Motor Defect? Eduardo Murphy 12/18/03

Re: Motor Defect? Alex J 12/18/03

Re: Motor Defect? Eduardo Murphy 12/19/03

Re: Motor Defect? shawn 12/17/03

Re: Motor Defect? Arne 12/17/03

Amplitude of RBPF w/ 120Hz sidebands Mack 12/16/03

Re: Amplitude of RBPF w/ 120Hz sidebands Ing. Javier Rodríguez 1/12/04

Re: Amplitude of RBPF w/ 120Hz sidebands Arne 12/17/03

Re: Amplitude of RBPF w/ 120Hz sidebands Shaker 12/17/03

Re: Amplitude of RBPF w/ 120Hz sidebands Mack 12/30/03

Re: Amplitude of RBPF w/ 120Hz sidebands MachineryWatch 12/16/03

Re: Amplitude of RBPF w/ 120Hz sidebands Mack 12/30/03

Re: Amplitude of RBPF w/ 120Hz sidebands Charlie cs2mh@AOL.COM 12/16/03

Re: Amplitude of RBPF w/ 120Hz sidebands 12/16/03

Re: Amplitude of RBPF w/ 120Hz sidebands Mack 12/30/03

Re: Amplitude of RBPF w/ 120Hz sidebands Rob Vieveen 3/19/04

Road Vibration Steve 12/16/03

Re: Road Vibration Tom Irvine, tomirvine@aol.com 1/5/04

Vibration isolator with built-in dynamic absorber Viktor718@aol.com 12/13/03

Re: Vibration isolator with built-in dynamic absorber Arne 12/14/03

Re: Vibration isolator with built-in dynamic absorber Viktor718@aol.com 12/16/03

Re: Vibration isolator with built-in dynamic absorber Ellena1@aol.com 1/2/04

Re: Vibration isolator with built-in dynamic absorber Viktor718@aol.com 1/2/04

Best and Worst Soft bearing balancing machines MROSS10@columbus.rr.com 12/9/03

Re: Best and Worst Soft bearing balancing machines jclough 12/15/03

Re: Best and Worst Soft bearing balancing machines 12/28/03

Re: Best and Worst Soft bearing balancing machines jclough 12/29/03

Re: Best and Worst Soft bearing balancing machines Eduardo Murphy 12/11/03

Re: Best and Worst Soft bearing balancing machines Arne 12/15/03

Proximity probes sequence: Is there a standard? Rudy 12/9/03

Re: Proximity probes sequence: Is there a standard? Mark Jordan 12/14/03

Re: Proximity probes sequence: Is there a standard? Eduardo Murphy 12/11/03

Re: Proximity probes sequence: Is there a standard? Dave G, www.reliabilitydirect.com 12/10/03

Re: Proximity probes sequence: Is there a standard? Peggy 12/10/03

Re: Proximity probes sequence: Is there a standard? Shane 12/17/03

Re: Proximity probes sequence: Is there a standard? Mr Denis 3/16/04

Re: Proximity probes sequence: Is there a standard? Shane 6/24/04

Re: Which direction the compressor's rotor has moved Thomas Purackal 12/9/03

Article 5082 12/4/03

Need Vibration Parameters trcoker@vaughnmelton.com 12/4/03

Demod vs accel Neil Clough 12/3/03

Re: Demod vs accel Peggy 12/10/03

Re: Demod vs accel MachineryWatch 12/9/03

Re: Demod vs accel Shaker 12/9/03

Rotor bars in electric motors Neil Clough 12/3/03

Bearing loosness Neil Clough 12/2/03

Re: Bearing loosness shawn 12/9/03

Re: Bearing loosness Ron Stiemsma 12/8/03

Re: Bearing loosness Dave G, www.reliabilitydirect.com 12/3/03

Re: Bearing loosness Arne 12/2/03

TA Alarms Neil Clough 12/2/03

Re: TA Alarms Arne 12/2/03

Hydraulic component vibration Charl Marais 12/2/03

Re: Hydraulic component vibration LARRY eIDSON 12/4/03

Overall g's vs speed Ed Fuentes 12/1/03

Re: Overall g's vs speed Eduardo Murphy 12/1/03

Re: Overall g's vs speed Arne 12/1/03

ISO 10816 hhhosny67@yahoo.com 11/29/03

Re: ISO 10816 jagama@ec-red.com 6/24/04

Re: ISO 10816 Eduardo Murphy 11/30/03

Re: ISO 10816 Arne 12/1/03

Re: ISO 10816 Eduardo Murphy 12/1/03

Re: ISO 10816 Arne 11/30/03

Preheater fan Hosny Mohamed 11/28/03

Re: Preheater fan siva 8/16/04

Re: Preheater fan JBAKER (PMCI) 12/4/03

Blowers problems hhhosny67@yahoo.com 11/28/03

Re: Blowers problems vinay sharma 12/3/03

Re: Blowers problems Arne 11/29/03

vibration at shut off Doug Olsen 11/28/03

Re: vibration at shut off 12/2/03

Re: vibration at shut off 11/28/03

vibration severity ranges chris maharaj 11/28/03

Re: vibration severity ranges Arne 11/28/03

vibration severity ranges chris maharaj 11/28/03

1/2 lobe frequency in screw compressor alan.lomax@kcc.com 11/28/03

Re: 1/2 lobe frequency in screw compressor Arne 11/28/03

Re: 1/2 lobe frequency in screw compressor alan.lomax@kcc.com 12/1/03

Damping in catilever beam Sil-Mon Li 11/26/03

Re: Damping in catilever beam Doug D. from Illinois 12/14/03

Re: Damping in catilever beam rmooij@technofysica.nl 11/27/03

High frequency vibrations in HT motors. rajendra_a_zope@ril.com 11/24/03

Re: High frequency vibrations in HT motors. viblee@kps.co.kr 11/26/03

Re: High frequency vibrations in HT motors. Arne 11/27/03

Re: High frequency vibrations in HT motors. Arne 11/25/03

Re: High frequency vibrations in HT motors. noble 11/27/03

Low Frequency in Kiln Drive noble 11/24/03

Re: Low Frequency in Kiln Drive Ramanathan P S 11/26/03

Re: Low Frequency in Kiln Drive MachineryWatch 11/24/03

Re: Low Frequency in Kiln Drive Bill 11/24/03

Re: Low Frequency in Kiln Drive Noble 11/27/03

GEARs Giomby 11/22/03

Re: GEARs Arne 11/23/03

JTFA anyone? Kevin Hankins khankins@invacare.com 11/21/03

Re: JTFA anyone? Walt 11/22/03

CSI 2120-2 lobomalvado@hotmail.com 11/21/03

Re: CSI 2120-2 Arne 11/21/03

CSI 2120-2 lobomalvado@hotmail.com 11/21/03

vibration analysis for piston compressors kerembugay@hotmail.com 11/21/03

Re: vibration analysis for piston compressors Arne 11/21/03

vibration analysis for piston compressors kerembugay@hotmail.com 11/21/03

critical speed jclough 11/20/03

Re: critical speed Neil Clough 12/2/03

Re: critical speed 11/25/03

Re: critical speed Arne 11/21/03

Blade pitch Craig Van Wyke 11/19/03

Re: Blade pitch Willem 12/4/03

Re: Blade pitch Arne 11/23/03

Re: Blade pitch Eduardo Murphy 11/19/03

Memory Card Keith 11/19/03

RBPF-Mechanical or Electrical? Sajeev, EQUATE 11/18/03

Re: RBPF-Mechanical or Electrical? Debasis Bhattacharyya, NTPC Kahalgaon 11/27/03

Re: RBPF-Mechanical or Electrical? peggy t 11/19/03

Re: RBPF-Mechanical or Electrical? Sajeev, EQUATE 11/19/03

Remote vibration measurement with unexpensive technique Wieslaw Bicz 11/18/03

Good Adhesive Keith 11/18/03

Re: Good Adhesive Dave G www.reliabilitydirect.com 11/18/03

Re: Good Adhesive Walt 11/18/03

Herringbone Gear Keith 11/17/03

Re: Herringbone Gear Walt 11/18/03

Re: Herringbone Gear Walt 11/18/03

Vib. Inst. Certifications 11/16/03

Re: Vib. Inst. Certifications Ronald L. Eshleman, Ph.D., P.E. 12/22/03

Re: Vib. Inst. Certifications Walt Strong 11/17/03

Vib. Inst. Certifications repetition fees Arne 11/21/03

high pump vibration problem er_siddu@yahoo.com 11/15/03

Re: high pump vibration problem Vishal Gour 7/10/04

Re: high pump vibration problem Walt Strong 11/15/03

Re: high pump vibration problem er_siddu@yahoo.com 11/16/03

Re: high pump vibration problem er_siddu@yahoo.com 11/16/03

Practice Tests for Level I christopher.valek@honeywell.com 11/14/03

Salary Range for Vibration Technicians christopher.valek@honeywell.com 11/14/03

Re: Salary Range for Vibration Technicians 10,000 12/9/04

Re: Salary Range for Vibration Technicians lightening7913 1/29/04

Bently Nevada “Snapshot” Vs. CSI “2130” portable data collectors. PC 11/14/03

Re: Bently Nevada “Snapshot” Vs. CSI “2130” portable data collect... Ashok Bhogle 12/19/03

Re: Bently Nevada “Snapshot” Vs. CSI “2130” portable data collect... Dave G. www.reliabilitydirect.com 11/14/03

Certifacation test Robert 11/13/03

Vibration Certification Bill 11/12/03

Re: Vibration Certification dnk 11/16/03

Re: Vibration Certification 11/12/03

The vibration level on the indication bar of Bently 3300/16XY Lin Zhenyao(lzyao@ynmail.com) 11/11/03

Re: The vibration level on the indication bar of Bently 3300/16XY Walt 11/12/03

Blowers Neil Clough 11/11/03

Re: Blowers Walt 11/11/03

Sole Plate Vibration Keith 11/11/03

Re: Sole Plate Vibration Todd Dahling 11/12/03

Re: Sole Plate Vibration 11/11/03

Wanted: Vibration expert with love for vinyl playback Adam in Portland, Oregon 11/10/03

the vibration level of A channel and B channel of Bently 3300/16XY Lin Zhenyao(lzyao@ynmail.com) 11/9/03

Re: the vibration level of A channel and B channel of Bently 3300... 11/10/03

Crank Shaft Vibration Bob Hillard 11/7/03

Re: Crank Shaft Vibration Walt 11/7/03

Aerodynamci destabilising forces by gas seals Giridhar 11/6/03

Re: Aerodynamci destabilising forces by gas seals C. Hunter Cloud 11/12/03

excitation from gas seals Giridhar 11/6/03

Joy Compressors and Bently Probes Sue 11/6/03

Re: Joy Compressors and Bently Probes Ken 11/10/03

New inertial theory of a rotor dynamics Yuriy Zhivotov 11/5/03

Information IRD 245 frborgman@comcast.net 11/5/03

Re: Information IRD 245 Rob F. 2/13/04

Re: Information IRD 245 Sue Starnes 11/6/03

safety standards for turbomachinery chris maharaj 11/5/03

Re: safety standards for turbomachinery Sasaki 11/5/03

Downstream Mechanical Fault Detection using Motor Current signature Analysis M. Rgeai 11/4/03

Re: Downstream Mechanical Fault Detection using Motor Current sig... Walt 11/7/03

Vibration analyzer jkarl@lotusengineeringinc.com 11/3/03

Re: Vibration analyzer Walt 11/4/03

vibration instruments willhuangxun@hotmail.com 11/3/03

Re: vibration instruments willhuangxun@hotmail.com 11/3/03

HT MOTOR BEARING TEMPARATURE INCREASE er_siddu@yahoo.com 11/3/03

Re: HT MOTOR BEARING TEMPARATURE INCREASE er_siddu@yahoo.com 11/15/03

Re: HT MOTOR BEARING TEMPARATURE INCREASE 11/13/03

Re: HT MOTOR BEARING TEMPARATURE INCREASE Ali Al-Shurafa 11/4/03

Re: HT MOTOR BEARING TEMPARATURE INCREASE rob (rmooij@technofysica.nl) 11/4/03

Re: HT MOTOR BEARING TEMPARATURE INCREASE Jason Chen 11/3/03

H.T.MOTOR DE BEARING HEATING T.Siddaiah 11/3/03

Windowing effect on overall value Mark 11/3/03

Re: Windowing effect on overall value MachineryWatch 11/3/03

Re: Windowing effect on overall value Tom Irvine, tomirvine@aol.com 11/10/03

SNE bearing housing senis 11/2/03

Re: SNE bearing housing Eben 11/4/03

Comparison nof Datapack1500 and CEMB N 402 cmc 11/1/03

vibration monitoring screw compressor Harry Lijzenga, Dutch NAVY 11/1/03

Re: vibration monitoring screw compressor pk guin (INDIA) 1/5/05

Re: vibration monitoring screw compressor 88gold944 11/10/03

Re: vibration monitoring screw compressor rmooij@technofysica.nl 11/4/03

Re: vibration monitoring screw compressor 11/2/03

Barring on soft nip Cal., Linerboard machine Scott 10/31/03

Re: Barring on soft nip Cal., Linerboard machine Arne 11/2/03

Re: Barring on soft nip Cal., Linerboard machine E Murphy 10/31/03

Machine Speed J. Fowler 10/31/03

Re: Machine Speed MachineryWatch 10/31/03

High Vibration Problem in Turbine Driven Boiler feed water Pump nalla_satyanarayana@rediffmail.com 10/31/03

High Vibration at Drip Pump DE bearing nalla_satyanarayana@rediffmai.com 10/30/03

vibration in Turbine driven boiler feed pump ad1969@rediffmail.com 10/30/03

Re: vibration in Turbine driven boiler feed pump Ali Al-Shurafa 10/31/03

Crest Factor Bill 10/30/03

Re: Crest Factor Gervais Charron www.voici.ca/gemtech 5/14/04

Re: Crest Factor Ali Al-Shurafa 10/30/03

Re: Crest Factor Peggy T. 10/31/03

Re: Crest Factor Ali Al-Shurafa 2/1/04

History of vibration problems Yuri 10/29/03

Blade pass Frequencies lcoker@technosfans.com 10/29/03

Re: Blade pass Frequencies Steve Schultheis 11/3/03

Re: Blade pass Frequencies MachineryWatch 10/30/03

Re: Blade pass Frequencies Ali Al-Shurafa 10/30/03

Sound Intensity Merasurments walter.kusaywa@ps.ge.com 10/29/03

Re: Sound Intensity Merasurments Ali Al-Shurafa 10/29/03

Underwater Probe Dave G., www.reliabilitydirect.com 10/27/03

Conversion Keith 10/27/03

Re: Conversion rmooij@technofysica.nl 10/28/03

Re: Conversion Jerry Stokes 10/27/03

Re: Conversion Keith 10/27/03

Re: Conversion Jerry 10/27/03

Re: Conversion Walt 10/27/03

Underwater probe Anas 10/27/03

Re: Underwater probe walter.kusaywa@ps.ge.com 10/29/03

Re: Underwater probe Ali Al-Shurafa 10/27/03

Re: Underwater probe Anas 10/28/03

Re: Underwater probe Ali Al-Shurafa 10/28/03

Time waveform analysis Bearing Aid 10/24/03

Re: Time waveform analysis Al 10/27/03

Re: Time waveform analysis DavidM 10/26/03

Re: Time waveform analysis mario 11/23/04

Re: Time waveform analysis Arne 10/24/03

Help!! tips on how to monitor hydraulic pump? Bearing Assasin 10/24/03

Re: Help!! tips on how to monitor hydraulic pump? Jim Crowe 10/27/03

Re: Help!! tips on how to monitor hydraulic pump? 10/26/03

Re: Help!! tips on how to monitor hydraulic pump? dnk 10/27/03

Bearing cross reference database steve.rapoza@sheffield-labs.com 10/23/03

Re: Bearing cross reference database 10/24/03

Re: Bearing cross reference database mdhoward@santeecooper.com 10/19/04

Bearing Damage Resulting From Shaft Voltages and Currents Yehia Zakaria Abd-Elmagid Zedan 10/22/03

Re: Bearing Damage Resulting From Shaft Voltages and Currents rmooij@technofysica.nl 10/28/03

Re: Bearing Damage Resulting From Shaft Voltages and Currents Arne 10/22/03

Problem with an electric motor Marc 10/22/03

Re: Problem with an electric motor Chia 11/1/03

Re: Problem with an electric motor mario 11/23/04

Re: Problem with an electric motor teberhard 10/22/03

Article 4854 Marc 10/22/03

Re: Article 4854 rmooij@technofysica.nl 10/28/03

Horizontal Vibrations and resonance frequency Senis 10/21/03

Re: Horizontal Vibrations and resonance frequency 6/28/04

Re: Horizontal Vibrations and resonance frequency DavidM 10/21/03

Vibration in an electric motor a.vidarte@koniker.coop 10/21/03

Re: Vibration in an electric motor MachineryWatch 10/21/03

Transducer problem? Neil Clough 10/19/03

Unknown frequencies Neil Clough 10/19/03

Re: Unknown frequencies Charlie cs2mh@aol.com 10/20/03

Critical Speed Iyer 10/18/03

Re: Critical Speed pawarpramod19772 10/19/04

Re: Critical Speed pawarpramod1977 10/19/04

Re: Critical Speed senthil_fig@yahoo.co.in 10/29/04

Re: Critical Speed pawarpramod19772 10/19/04

Re: Critical Speed pawarpramod1977 10/19/04

Re: Critical Speed 10/11/04

Re: Critical Speed Arne 10/18/03

Re: Critical Speed Thomas Purackal 10/18/03

Very Slow Speed Machines Data Acquisation? CSi User UK 10/16/03

Re: Very Slow Speed Machines Data Acquisation? ravi65_in@yahoo.com 12/10/03

Re: Very Slow Speed Machines Data Acquisation? Jim Crowe 10/22/03

Re: Very Slow Speed Machines Data Acquisation? CSi User UK - Darren 10/23/03

Re: Very Slow Speed Machines Data Acquisation? Jim Crowe 10/23/03

Re: Very Slow Speed Machines Data Acquisation? Microlog User 10/22/03

Re: Very Slow Speed Machines Data Acquisation? Shaker 10/22/03

Re: Very Slow Speed Machines Data Acquisation? Debasis Bhattacharyya, NTPC Kahalgaon 10/21/03

Re: Very Slow Speed Machines Data Acquisation? CSi User UK - Darren 10/21/03

Re: Very Slow Speed Machines Data Acquisation? MachineryWatch 10/21/03

Accelerometer Selection For Gas Cooler Motor and Fan Bering Shed 10/16/03

Re: Accelerometer Selection For Gas Cooler Motor and Fan Bering Arne 10/16/03

Negative averaging Bill 10/15/03

Re: Negative averaging Arne 10/15/03

Re: Negative averaging BILL 10/16/03

Vibration Analysis set up R.S.Iyer 10/12/03

Re: Vibration Analysis set up Thomas Purackal 10/13/03

balancing tony 10/10/03

Re: balancing Arne 10/15/03

Re: balancing TONY 10/15/03

Re: balancing AND How can we reduce spam? arnelind 10/16/03

balancing tony 10/10/03

Re: balancing sert 10/15/03

thanks rotor dynamic 10/10/03

Vibration Analysis Karen 10/10/03

Re: Vibration Analysis Dave G. www.reliabilitydirect.com 10/12/03

Re: Vibration Analysis Alan F 10/10/03

Vibrating Screen Stroke Length Dom 10/7/03

Re: Vibrating Screen Stroke Length Arne 10/15/03

Re: Vibrating Screen Stroke Length 10/16/03

Re: Vibrating Screen Stroke Length Arne 10/16/03

Re: Vibrating Screen Stroke Length 10/17/03

Re: Vibrating Screen Stroke Length Arne 10/20/03

rotor dynamic ahmed 10/7/03

Re: rotor dynamic Yu.Zhivotov 10/9/03

Re: rotor dynamic Ali Al-Shurafa 10/7/03

Re: rotor dynamic ahmed 10/8/03

Re: rotor dynamic Saif Al-Farsi-Petroleum Development Oman 2/8/04

Diesel Engine Driven Pumps Rob Scowen 10/7/03

Re: Diesel Engine Driven Pumps Steve Newcomb, 1/1/04

Re: Diesel Engine Driven Pumps Purvez Rustomji 1/13/05

Re: Diesel Engine Driven Pumps Steve NewcombRob, 1/1/04

Re: Diesel Engine Driven Pumps Steve NewcombRob, 1/1/04

Re: Diesel Engine Driven Pumps rob 10/8/03

Re: Diesel Engine Driven Pumps Arne 10/15/03

Re: Diesel Engine Driven Pumps Willem 10/17/03

Re: Diesel Engine Driven Pumps Arne 10/17/03

Re: Diesel Engine Driven Pumps Willem 10/17/03

Re: Diesel Engine Driven Pumps Arne 10/20/03

Re: Diesel Engine Driven Pumps rob (rmooij@technofysica.nl) 10/24/03

The equation of a rotor dynamics with a moment unbalance Yu. Zhivotov. 10/6/03

tuning long steam turbine blades tony 10/4/03

Re: tuning long steam turbine blades Arne 10/4/03

Re: tuning long steam turbine blades tony 10/5/03

Loose steam turbine wheel tony 10/4/03

Re: Loose steam turbine wheel Arne 10/4/03

Looking for MTS m/n845.09 manual, IMPAC 99 matt.wood@sypris.com 10/3/03

fretting on rear face of tilt pad journal bearings Abdul Charmi 10/3/03

Re: fretting on rear face of tilt pad journal bearings Steve Schultheis 10/6/03

Re: fretting on rear face of tilt pad journal bearings Arne 10/3/03

assembled FFT analyser serci 10/3/03

Re: assembled FFT analyser Dave G. www.reliabilitydirect.com 10/3/03

Re: assembled FFT analyser MachineryWatch 10/3/03

Re: assembled FFT analyser Eduardo Murphy 10/3/03

HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUGAL COMPRESSOR Ashok Bhogle 10/2/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUGAL C... laxmi_bhamidipati@yahoo.com 10/3/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUG... Arne 10/3/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUGAL C... laxmi_bhamidipati@yahoo.com 10/3/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUGAL C... MachineryWatch 10/3/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUG... Ashok Bhogle 10/4/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUGAL C... Arne 10/2/03

Re: HIGH SUBSYNCHRONOUS VIBRATIONS IN BARREL SHAPED CENTRIFUG... Steve Schultheis 10/6/03

Base line readings Neil Clough 10/1/03

Re: Base line readings Alan F 10/2/03

what is Static and dynamic balancing Sam 10/1/03

Re: what is Static and dynamic balancing Arne 10/1/03

Rolling Element Bearings RF 9/30/03

Re: Rolling Element Bearings Dave G. www.reliabilitydirect.com 10/1/03

Re: Rolling Element Bearings 10/1/03

Needed IRD {Datapac} Johnsa 9/30/03

Re: Needed IRD {Datapac} Tobin Berkovitz 7/4/04

Re: Needed IRD {Datapac} james 11/22/04

Re: Needed IRD {Datapac} james 11/22/04

Re: Needed IRD {Datapac} 11/22/04

Re: Needed IRD {Datapac} 5/6/04

Re: Needed IRD {Datapac} g_mccole@hotmail.com 1/12/04

Re: Needed IRD {Datapac} James Palmer 1/20/04

Re: Needed IRD {Datapac} g_mccole@hotmail.com 1/12/04

Flakt fan high vertical vib Craig Van Wyke 9/29/03

Re: Flakt fan high vertical vib MachineryWatch 9/29/03

Re: Flakt fan high vertical vib Shawn 9/30/03

MTWIN (export to Excel) Horst 9/29/03

Article by Josepsh Shea and James Taylor "Spike Energy" PF 9/28/03

Re: Article by Josepsh Shea and James Taylor "Spike Energy" Julien Le Bleu 10/3/03

Re: Article by Josepsh Shea and James Taylor "Spike Energy" 2/16/04

Used CSI 2115 or 2120 the underdog 9/28/03

Intrinsically Safe Data Collector 9/27/03

Re: Intrinsically Safe Data Collector Dave G. www.reliabilitydirect.com 9/27/03

VIBRATION AND ENVIRONMENTAL CONTROL MARCIO TADEU - BRASIL 9/26/03

Re: VIBRATION AND ENVIRONMENTAL CONTROL Shawn 9/29/03

starting pay???? caleido 9/26/03

Re: starting pay???? Arne 9/26/03

Power spectral density Jason Chen 9/26/03

Re: Power spectral density Aisha Khan 3/10/05

Re: Power spectral density Jacek 11/18/04

Re: Power spectral density Tom Irvine, tomirvine@aol.com 9/29/03

Re: Power spectral density Dave G. www,reliabilitydirect.com 9/29/03

Electric Motor Bearing Database PF 9/25/03

Re: Electric Motor Bearing Database tutu324@yahoo.com 3/29/05

Re: Electric Motor Bearing Database 3/29/05

Re: Electric Motor Bearing Database BIG SPRING GIN 4/14/04

Re: Electric Motor Bearing Database Jerry Michaelson 10/3/03

detection of crack xavier 9/25/03

Re: detection of crack Arne 9/25/03

Re: detection of crack xavier 10/4/03

Phase readings Xavier 9/25/03

Re: Phase readings Arne 9/25/03

2xLF with 4x RPM SJACKSON 9/25/03

Re: 2xLF with 4x RPM Arne 9/25/03

Re: 2xLF with 4x RPM Ali Al-Shurafa 9/26/03

Re: 2xLF with 4x RPM Vern Maddox 9/25/03

With Entek's Enwatch16CH,how to collect the Gap Voltage from Bently 3300/20 Lin Zhenyao(lzyao@ynmail.com) 9/25/03

Re: With Entek's Enwatch16CH,how to collect the Gap Voltage from ... 9/25/03

Type of rotors Patrick Lee 9/24/03

Re: Type of rotors Eduardo Murphy 9/24/03

Re: Type of rotors Arne 9/24/03

fft analyzer b hale 9/22/03

Re: fft analyzer Tom Irvine, tomirvine@aol.com 9/24/03

Re: fft analyzer Dan Bradley 9/23/03

Re: fft analyzer Eduardo Murphy 9/22/03

Re: fft analyzer Skip Hartman 9/22/03

-------------------- ------------------ 9/22/03

Re: WNTB SKF CMVA60 & Prism4 software Dave G. ww.reliabilitydirect.com 9/26/03

VFD & Soft start b hale 9/19/03

Re: VFD & Soft start Arne 9/20/03

Re: VFD & Soft start Bill Hale 9/22/03

high axial vibration faruqkh@yahoo.com 9/18/03

Re: high axial vibration 10/27/03

Re: high axial vibration E Murphy 9/21/03

Re: high axial vibration Shaker 9/19/03

2-pole, large HP, Allice Chalmers motors Phred 9/18/03

Re: 2-pole, large HP, Allice Chalmers motors 5/31/04

Re: 2-pole, large HP, Allice Chalmers motors pjpiontek@ameren.com 5/1/04

Re: 2-pole, large HP, Allice Chalmers motors pjpiontek@ameren.com 5/1/04

Re: 2-pole, large HP, Allice Chalmers motors pjpiontek@ameren.com 5/1/04

Re: 2-pole, large HP, Allice Chalmers motors JERDMANN@CSU.ORG 9/18/03

Re: 2-pole, large HP, Allice Chalmers motors 9/19/03

Re: 2-pole, large HP, Allice Chalmers motors cbbently 9/18/03

Re: 2-pole, large HP, Allice Chalmers motors al.capm@smithservices .com 11/10/03

Gear Box Vibration engmohammedsaber@yahoo.com 9/18/03

Re: Gear Box Vibration Dr. Moh Nasr 9/30/03

Re: Gear Box Vibration Mohammed Saber 10/15/03

Re: Gear Box Vibration Eduardo Murphy 9/22/03

Re: Gear Box Vibration Steven Schultheis 9/23/03

Re: Gear Box Vibration Alex J 9/18/03

Re: Gear Box Vibration Ali Al-Shurafa 9/19/03

Re: Gear Box Vibration Mohammed Saber 10/15/03

"Hot" alignments - screw compressors techservices@bbdynamo.com 9/17/03

Re: "Hot" alignments - screw compressors Arne 9/17/03

Re: "Hot" alignments - screw compressors Shawn 9/18/03

Electrical Fluting - DC Motors Sajeev, EQUATE petrochemicals 9/17/03

Re: Electrical Fluting - DC Motors Shaker 9/18/03

Aircraft engine vibration Yuri 9/17/03

Re: Aircraft engine vibration Arne 9/17/03

Re: Aircraft engine vibration Yuri 9/17/03

The acoustic limit and measuring standard for Linear Actuator (Electrical Jack) Jason Chen 9/16/03

gSE (spike energy) collection specs. Don 9/15/03

Turbine Vibration as India 9/15/03

Re: Turbine Vibration R.S.Iyer 10/10/03

Re: Turbine Vibration Steve Schultheis 9/15/03

Re: Turbine Vibration as,india 9/16/03

Re: Turbine Vibration Steve Schultheis 9/23/03

Centrifugal Pump Axial vibration Rao 9/13/03

Re: Centrifugal Pump Axial vibration Vern Maddox 9/24/03

Re: Centrifugal Pump Axial vibration Arne 9/14/03

Re: Centrifugal Pump Axial vibration Mike Harrington 9/11/04

Re: Centrifugal Pump Axial vibration Mike Harrington 9/11/04

Re: Centrifugal Pump Axial vibration Rao 9/15/03

Re: Centrifugal Pump Axial vibration Debasis Bhattacharyya, NTPC Kahalgaon 9/16/03

Re: Centrifugal Pump Axial vibration Debasis Bhattacharyya, NTPC Kahalgaon 9/13/03

Re: Centrifugal Pump Axial vibration Sasaki 9/15/03

Reciprocating compressor vibration limits raghunathk@elgi.co.in 9/12/03

Re: Reciprocating compressor vibration limits Sasaki 9/16/03

Re: Reciprocating compressor vibration limits raghunathk@elgi.co.in 9/19/03

Re: Reciprocating compressor vibration limits Sasaki 9/21/03

Re: Reciprocating compressor vibration limits raghunathk@elgi.co.in 9/28/03

Re: Reciprocating compressor vibration limits Arne 9/12/03

Re: Reciprocating compressor vibration limits Raghunathk@elgi.co.in 9/15/03

Re: Reciprocating compressor vibration limits chany 10/29/03

i'm sorry.forgot my contact email ar thailand 9/11/03

Pls help me about balancing machine ar thailand 9/11/03

Re: Pls help me about balancing machine Debasis Bhattacharyya, NTPC Kahalgaon 9/13/03

Vibration Standard rajendra_a_zope@ril.com 9/11/03

Re: Vibration Standard Arne 9/12/03

Re: Vibration Standard Ali Al-Shurafa 9/12/03

Reference Material/Sources Matt 9/11/03

Re: Reference Material/Sources Arne 9/12/03

Bearing question Neil 9/10/03

Re: Bearing question Gervais Charron www.voici.ca/gemtech 5/14/04

Re: Bearing question 9/27/03

Re: Bearing question Lee 9/11/03

Re: Bearing question Ali Al-Shurafa 9/11/03

Sundyne Pump Mallik 9/10/03

Re: Sundyne Pump Al Raguse 12/18/03

Re: Sundyne Pump Manish_M_Pitkar@ril.com 11/19/03

Re: Sundyne Pump Alex J 9/18/03

Re: Sundyne Pump Sasaki 9/16/03

Sundyne Pump Mallik 9/10/03

confusing vibration question kaitlinguner@hotmail.com 9/8/03

Re: confusing vibration question Arne 9/12/03

Re: confusing vibration question Ali Al-Shurafa 9/8/03

FRF Using Entek Datapac 1500 9/7/03

proximas in need ATIPS 9/5/03

Re: proximas in need Charlie cs2mh@aol.com 9/7/03

Re: proximas in need Eduardo Murphy 9/7/03

Re: proximas in need Steve Schultheis 9/6/03

Re: proximas in need Walt Strong 9/5/03

operational modal analysis c.cavagnino@it.agusta.com 9/5/03

Re: operational modal analysis shiva337@rediffmail.com 3/22/04

Re: operational modal analysis 4/21/05

Re: operational modal analysis Tomek 4/21/05

Vibration of machines coupled with electric motor raghunathk@elgi.co.in 9/5/03

Re: Vibration of machines coupled with electric motor bhoopalan@roltanet.com 3/2/04

Re: Vibration of machines coupled with electric motor ray 9/21/03

Re: Vibration of machines coupled with electric motor raghunathk@elgi.co.in 9/28/03

BR Gale Blowers Kazregis.Walter@jdirving.com or Kazregis@megalink.net 9/4/03

Re: BR Gale Blowers tk@jenk.dk 12/30/03

Re: BR Gale Blowers tk@jenk.dk 12/30/03

SKF microlog batteries Phred 9/4/03

Re: SKF microlog batteries Lee 9/8/03

Re: SKF microlog batteries Dan Bradley 9/4/03

New to vibration Neil 9/3/03

Re: New to vibration Walt Strong 9/3/03

Re: New to vibration Neil 9/3/03

Re: New to vibration 9/3/03

Re: New to vibration Pavel 9/4/03

Re: New to vibration Pavel 9/4/03

Looking for Combined Oil & Vibration Case Histories James E. Berry, P.E. 9/3/03

Re: Looking for Combined Oil & Vibration Case Histories Sajeev,Equate 10/28/03

Re: Looking for Combined Oil & Vibration Case Histories Sajeev,Equate 10/28/03

peak at 2x in motor at radial direction. Mallik 9/3/03

Re: peak at 2x in motor at radial direction. MachineryWatch 9/4/03

Re: peak at 2x in motor at radial direction. Donald Nice, Jr 9/3/03

Re: peak at 2x in motor at radial direction. 9/4/03

Vibration of direct driven Tank mounted reciprocating air compressor (3-15hp) raghunathk@elgi.co.in 9/3/03

What is BNC stand for in English? Lin Zhenyao : lzyao@ynmail.com 9/2/03

Re: What is BNC stand for in English? Edurado Murphy 9/7/03

Re: What is BNC stand for in English? S.V.Shepherd 9/3/03

Rigid Rotor-Phase Angle Gregory 9/2/03

Re: Rigid Rotor-Phase Angle Giridhar 9/2/03

Re: Rigid Rotor-Phase Angle Gregory 9/2/03

Re: Rigid Rotor-Phase Angle Michael Titone 9/4/03

Re: Rigid Rotor-Phase Angle Arne 9/2/03

Accelerometer mounting S.V.Shepherd 9/2/03

Re: Accelerometer mounting Swany 9/9/03

Re: Accelerometer mounting SKM Rao 9/2/03

Re: Accelerometer mounting S.V.Shepherd 9/2/03

Pacific 2.5 RLIJ, 11 stage charging pump vibration problems rirayme@wcnoc.com 8/29/03

Re: Pacific 2.5 RLIJ, 11 stage charging pump vibration problems alarie.maurice@sourceatlantic.ca 12/9/03

Re: Pacific 2.5 RLIJ, 11 stage charging pump vibration problems Walt Strong 8/29/03

Re: Pacific 2.5 RLIJ, 11 stage charging pump vibration problems rirayme@wcnoc.com 8/29/03

Balancing a Boiler ID Fan Mike Baucum 8/28/03

Re: Balancing a Boiler ID Fan 2/18/04

Re: Balancing a Boiler ID Fan Arne 8/28/03

Re: Balancing a Boiler ID Fan Walt Strong 8/28/03

Re: Balancing a Boiler ID Fan Lee 9/1/03

Re: Balancing a Boiler ID Fan JBAKER (PMCI) 12/4/03

Setting up a vibration database R Tyler 8/27/03

Re: Setting up a vibration database vibratek@vibratek.com.tr 8/29/03

Re: Setting up a vibration database Walt Strong 8/27/03

Re: Setting up a vibration database Arne 8/29/03

Air coolers for refinery services Marc 8/26/03

Re: Air coolers for refinery services Walt Strong 8/26/03

low RPM bearing frequency analysis Swany 8/26/03

Re: low RPM bearing frequency analysis rdenton@wilcoxon.com 9/2/03

Reciprocating Gas Engine Vibration peter 8/26/03

Re: Reciprocating Gas Engine Vibration Arne 8/26/03

Re: Reciprocating Gas Engine Vibration peter 8/27/03

Re: Reciprocating Gas Engine Vibration peter 8/27/03

Re: Reciprocating Gas Engine Vibration Arne 8/27/03

Bearing cross reference database R Tyler 8/25/03

Re: Bearing cross reference database GREG SR. at BFLOBRGS@AOL.COM 1/8/04

Re: Bearing cross reference database steve 8/25/03

Re: Bearing cross reference database jim.collins@dmax-ltd.com 7/8/04

Re: Bearing cross reference database Dave G., www.reliabilitydirect.com 8/25/03

Motor Bearing fluting Charles Buffolano 8/25/03

Re: Motor Bearing fluting Harry Walton 8/21/04

Re: Motor Bearing fluting William Oh 3/9/04

Re: Motor Bearing fluting Don Rainey 8/28/03

Re: Motor Bearing fluting Shawn 8/25/03

High Vibration in ID Fan Of Heater Venkatesh 8/24/03

Re: High Vibration in ID Fan Of Heater Sasaki 8/25/03

Sudden increase in vibration in ID fan of Heater Venkatesh (venky_1971@engineer.com) 8/23/03

Re: Sudden increase in vibration in ID fan of Heater john 8/24/03

Re: Sudden increase in vibration in ID fan of Heater Walt Strong 8/23/03

0.5x in motor john 8/21/03

Re: 0.5x in motor AK 8/25/03

Re: 0.5x in motor rob 8/22/03

Re: 0.5x in motor Arne 8/21/03

Vibration Colectors Benchmarking dmendoza@fino.com.bo 8/19/03

Re: Vibration Colectors Benchmarking Dan Bradley 8/20/03

Re: Vibration Colectors Benchmarking Walt Strong 8/20/03

model Updating 8/19/03

Re: model Updating mossfam@rcnchicago.com 8/19/03

Rigid Body Modes Kevin 8/17/03

Re: Rigid Body Modes puthenjf@shb.equate.com 8/22/03

Re: Rigid Body Modes Mossfam@rcnchicago.com 8/18/03

DSP willhzj@yahoo.com.cn 8/16/03

Re: DSP Donald.Howieson@diaginst.co.uk 8/19/03

Re: DSP Dan Bradley 8/18/03

About Manufacturer willhzj@yahoo.com.cn 8/15/03

Re: About Manufacturer Dave G. www.reliabilitydirect.com 8/15/03

Equipment Monitoring Guide Lines RF 8/14/03

Re: Equipment Monitoring Guide Lines mike cooney 8/17/03

Vibration Parameters & Alarms Scott 8/13/03

Re: Vibration Parameters & Alarms dmendoza@fino.com.bo 8/19/03

Re: Vibration Parameters & Alarms Dave G. www.reliabilitydirect.com 8/13/03

Re: Vibration Parameters & Alarms Gevenag 8/18/03

Re: Vibration Parameters & Alarms Arne at arnelind@telia.com 8/13/03

Re: Vibration Parameters & Alarms Giridhar 8/13/03

Re: Vibration Parameters & Alarms bacock@aol.com 8/25/03

Re: Vibration Parameters & Alarms dmendoza@fino.com.bo 8/19/03

Re: Vibration Parameters & Alarms dmendoza@fino.com.bo 8/19/03

Microlog vs Datapac Dom 8/12/03

Abnormal 1X vibration in motor Aditya Korde 8/12/03

Re: Abnormal 1X vibration in motor Eben 8/18/03

Re: Abnormal 1X vibration in motor Yu. Zhivotov 8/13/03

Re: Abnormal 1X vibration in motor willem 8/13/03

Re: Abnormal 1X vibration in motor Alex J 8/12/03

Re: Abnormal 1X vibration in motor Doctor Don 8/20/03

ADRE Vibration monitoring System Asingh 8/8/03

Re: ADRE Vibration monitoring System Steve 8/21/03

Re: ADRE Vibration monitoring System N. Endres (ned.endres@bently.com) 8/14/03

Re: ADRE Vibration monitoring System Hugh Hackett 8/19/03

Re: ADRE Vibration monitoring System Hugh Hackett 8/11/03

Starting in Vibration ramon229@earthlink.net 8/8/03

Re: Starting in Vibration 8/9/03

Gear Mesh westmr@bowinc.co 8/8/03

Re: Gear Mesh steve schultheis 8/12/03

Re: Gear Mesh d.mccall 8/11/03

Torsional analysis Yiakopoulos 8/7/03

Re: Torsional analysis Willem 8/11/03

Re: Torsional analysis vibratek@vibratek.com.tr 8/8/03

Re: Torsional analysis ibrahimhc@vibratek.com.tr 8/8/03

Antialising filter Chrisrtos 8/7/03

Re: Antialising filter E Murphy 8/7/03

Detecting Bearing failures at low RPM Swany 8/6/03

Re: Detecting Bearing failures at low RPM John 8/6/03

Re: Detecting Bearing failures at low RPM david.mccall@skf.com 8/6/03

Re: Detecting Bearing failures at low RPM crdvibs101@yahoo.com 1/29/04

Re: Detecting Bearing failures at low RPM crdvibs101@yahoo.com 1/29/04

Re: Detecting Bearing failures at low RPM Arne 8/6/03

KWU 500 MW HP Rotor simultaneous 2 plane balancing subrataghosh@singrauli.ntpc.co.in 8/4/03

Re: KWU 500 MW HP Rotor simultaneous 2 plane balancing Arne 8/5/03

Re: KWU 500 MW HP Rotor simultaneous 2 plane balancing Arne 8/5/03

Re: KWU 500 MW HP Rotor simultaneous 2 plane balancing E. Murphy 8/5/03

Article 4484 8/4/03

Re: Article 4484 vinay sharma 12/3/03

cracked or broken shaft mike cooney 8/4/03

Re: cracked or broken shaft JP 8/6/03

Re: cracked or broken shaft JP 8/7/03

Used Adre system wdm@mechsol.com 8/2/03

Re: Used Adre system Ken 8/3/03

Increasing trend of vibration at O/B bearing of Centrifugal compressor ASGHAR NAQVI 8/2/03

Re: Increasing trend of vibration at O/B bearing of Centrifugal c... Arne 8/2/03

Re: Increasing trend of vibration at O/B bearing of Centrifug... Asghar Naqvi 8/4/03

noise control of gearbox vanrotev@bp.com 8/1/03

Re: noise control of gearbox rob 8/1/03

Re: noise control of gearbox Arne 8/1/03

Re: noise control of gearbox Shawn 8/1/03

Harmonics of 2x line frequency Dan K 7/31/03

Marley Series 36 Geareducer Scott 7/30/03

Re: Marley Series 36 Geareducer wkarthur@aol.com 12/14/03

Re: Marley Series 36 Geareducer spentp50@cal3.vsnl.net.in 8/23/03

Bode plots Mallik 7/29/03

Re: Bode plots viblee@kps.co.kr 8/2/03

Re: Bode plots E Murphy 7/29/03

Bode plots Mallik 7/29/03

multi analyzer nas 7/29/03

Re: multi analyzer Arne 7/29/03

Irratic vibration vibo-man 7/29/03

Re: Irratic vibration wolfer 7/31/03

Re: Irratic vibration hugh.hackett@exeloncorp.com 7/30/03

Re: Irratic vibration Arne 7/29/03

Re: Irratic vibration dnk 7/29/03

RESONANCE MALLIK 7/28/03

Stiffening Usually Does NOT Work Malcolm Leader 8/30/03

Re: RESONANCE Willem 8/11/03

Re: RESONANCE Alex J 8/12/03

Re: RESONANCE Yu. Zhivotov 8/4/03

Re: RESONANCE viblee@kps.co.kr 8/2/03

Re: RESONANCE E Murphy 7/28/03

Re: RESONANCE Alex J 7/28/03

whirling vibration Harry Lijzenga 7/26/03

Re: whirling vibration rob mooij - techno fysica bv 8/1/03

correlation of ultrasonic frequencies and bearing condition subrataghosh@singrauli.ntpc.co.in 7/24/03

Re: correlation of ultrasonic frequencies and bearing condition dnk 7/30/03

Re: correlation of ultrasonic frequencies and bearing condition Arne 7/25/03

Bearing fault frequencies virupaksha.v@anandgroupindia.com 7/24/03

Re: Bearing fault frequencies Arne 7/24/03

Free Vibration Resource Center Alan F 7/23/03

Re: Free Vibration Resource Center Gevenag 7/24/03

high values of nonsyncronous noor 7/23/03

Re: high values of nonsyncronous Arne 7/23/03

Datapac 1500, new batteries, negative voltage indication 7/22/03

Re: Datapac 1500, new batteries, negative voltage indication Rob Riley 8/1/03

Re: Datapac 1500, new batteries, negative voltage indication J Johnson 7/23/03

High Shaft Vibration in 500MW KWU HPTurine front & rear nalla_4020@yahoomail.com 7/20/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear viblee@kps.co.kr 8/2/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear Alex J 7/21/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear Nalla Satyanarayana nalla_satyanarayana@rediffmail.com 7/24/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear Alex J 7/24/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear nalla_satyanarayana@rediffmail.com 7/28/03

Re: High Shaft Vibration in 500MW KWU HPTurine front & rear Alex J 7/28/03

High 5X motor speed peak nalla_4020@yahoomail.com 7/20/03

Reliability / Sensor / Help Pam 7/17/03

High vibration level problem TEberhar@agrium.com 7/17/03

Re: High vibration level problem hugh.hackett@exeloncorp.com 7/17/03

Re: High vibration level problem TEberhar@agrium.com 7/17/03

Re: High vibration level problem Hugh Hackett 7/18/03

Re: High vibration level problem Arne 7/22/03

" Viscous" friction Gennady 7/17/03

Re: " Viscous" friction Yuriy Zhivotov. 7/21/03

Re: " Viscous" friction Gennady 7/18/03

Re: " Viscous" friction laxmi_bhamidipati@yahoo.com 7/19/03

Re: " Viscous" friction 7/18/03

Re: " Viscous" friction George 7/18/03

Re: " Viscous" friction Ron Hartlen 7/17/03

NEW THEORY OF ROTOR DYNAMICS Yu. Zhivotov 7/16/03

All you have to do... Malcolm Leader 8/30/03

motor broken bar Gevenag 7/15/03

Re: motor broken bar Walt Strong 7/15/03

Re: motor broken bar Gevenag 7/18/03

Re: motor broken bar Walt Strong 7/19/03

MAINTElligence Teberhar@agrium.com 7/14/03

Re: MAINTElligence David 7/23/03

Re: MAINTElligence Steve Reilly, DMSI 7/23/03

Re: MAINTElligence durnan2@kenergy.com 7/15/03

Re: MAINTElligence 7/14/03

Vibration modeling software kgraebner@cox.net 7/13/03

Re: Vibration modeling software chany 10/29/03

Modal data in universal file format Keith Barron 7/13/03

Re: Modal data in universal file format Todd Dahling 7/21/03

COOLING TOWERS 7/13/03

VIBRATION WORKSHOP PRO@SPECT 7/12/03

Noise and vibration correlation Evelyn 7/11/03

Re: Noise and vibration correlation E Murphy 7/11/03

Re: Noise and vibration correlation Walt Strong 7/11/03

Re: Noise and vibration correlation 7/11/03

Re: Noise and vibration correlation Wes 8/11/04

Rotor Slot Vibration Causes RF 7/8/03

Re: Rotor Slot Vibration Causes Walt Strong 7/10/03

Emonitor Odyssey vs. RBMware Ricardo Cravino 7/7/03

Re: Emonitor Odyssey vs. RBMware 11/30/04

Re: Emonitor Odyssey vs. RBMware aitor 11/30/04

Re: Emonitor Odyssey vs. RBMware Rpbert 8/1/03

Re: Emonitor Odyssey vs. RBMware 8/1/03

Re: Emonitor Odyssey vs. RBMware Walt Strong 7/8/03

Re: Emonitor Odyssey vs. RBMware Ricardo Cravino 7/9/03

Re: Emonitor Odyssey vs. RBMware Brazeau.luc@hydro.qc.ca 11/27/03

Re: Emonitor Odyssey vs. RBMware Arne 7/8/03

Re: Emonitor Odyssey vs. RBMware Ricardo Cravino 7/9/03

Re: Emonitor Odyssey vs. RBMware Charlie Hart 7/8/03

Re: Emonitor Odyssey vs. RBMware mike cooney 7/8/03

Re: Emonitor Odyssey vs. RBMware Mike Barnett 7/8/03

Re: Emonitor Odyssey vs. RBMware Steve Reilly, DMSI 7/7/03

Bently Nevada System 1 advantages and disadvantages Shed 7/6/03

Re: Bently Nevada System 1 advantages and disadvantages Robert 8/1/03

Re: Bently Nevada System 1 advantages and disadvantages Ken 7/19/03

Re: Bently Nevada System 1 advantages and disadvantages Dodd Mize - Dresser Rand 7/7/03

Re: Bently Nevada System 1 advantages and disadvantages Dave G. www.reliabilitydirect.com 7/7/03

VIBRATION BUILDING VIBRATION MARCIO BRAZIL 7/5/03

Re: VIBRATION BUILDING VIBRATION Arne 7/7/03

Re: VIBRATION BUILDING VIBRATION Tom Irvine, tomirvine@aol.com 7/7/03

Phase Lag Non Contact Vibration Monitoring System Gregory 7/4/03

Re: Phase Lag Non Contact Vibration Monitoring System E Murphy 7/11/03

Re: Phase Lag Non Contact Vibration Monitoring System 7/12/03

Re: Phase Lag Non Contact Vibration Monitoring System Gregory 7/5/03

Re: Phase Lag Non Contact Vibration Monitoring System Steve Schultheis 7/7/03

Re: Phase Lag Non Contact Vibration Monitoring System Gregory 7/8/03

Re: Phase Lag Non Contact Vibration Monitoring System Steven Schultheis 7/4/03

Phase Lag Non Contact Vibration Monitoring System Gregory 7/4/03

1xRP VERTICAL PUMP andrea 7/4/03

Re: 1xRP VERTICAL PUMP Ken/chroeng@postmark.net 8/3/03

Re: 1xRP VERTICAL PUMP ksreedhar@ntpc.co.in 11/26/04

Re: 1xRP VERTICAL PUMP Willem 7/4/03

Difference Between Natural Frequency and Resonance Frequency vijayasiva@captronicsystems.com 7/4/03

Re: Difference Between Natural Frequency and Resonance Frequency Bala(bkarunamurthy@hotmail.com) 1/15/04

Re: Difference Between Natural Frequency and Resonance Frequency Yu. Zhivotov 7/14/03

To Yuri The Shaker 7/16/03

Re: To Yuri Yuriy 7/17/03

Re: Difference Between Natural Frequency and Resonance Frequency The Shaker 7/14/03

Re: Difference Between Natural Frequency and Resonance Frequency Yu. Zhivotov 7/7/03

Re: Difference Between Natural Frequency and Resonance Frequency E Murphy 7/4/03

Re: Difference Between Natural Frequency and Resonance Frequency Arne 7/4/03

Re: Difference Between Natural Frequency and Resonance Frequency Ron Hartlen 7/4/03

Re: Difference Between Natural Frequency and Resonance Frequency S. Paul Mohan 8/1/03

Vibration education willem 7/2/03

Re: Vibration education CSI Belgium 7/23/03

Re: Vibration education MachineryWatch 7/2/03

Re: Vibration education Willem 7/4/03

Re: Vibration education MachineryWatch 7/7/03

Re: Vibration education MachineryWatch 7/4/03

Re: Vibration education Evelyn 7/4/03

Manufacturing Excellency: Integrating Lean and Six Sigma for Improved Manufacturing Efficiency conferences@marcusevansch.com 7/1/03

Re: Manufacturing Excellency: Integrating Lean and Six Sigma for ... Walt Strong 7/1/03

Vertical sump pump vibration Teberhar@agrium.com 6/30/03

Re: Vertical sump pump vibration Walt Strong 7/1/03

Re: Vertical sump pump vibration Ali Al-Shurafa 7/1/03

Vertical sump pump vibration Teberhard@agrium.com 6/30/03

Random vibration spikes in Turbines Chris Maharaj 6/30/03

Re: Random vibration spikes in Turbines Steve Schultheis 7/1/03

Re: Random vibration spikes in Turbines Chris Maharaj 7/1/03

Re: Random vibration spikes in Turbines Ali Al-Shurafa 7/1/03

vibration in shaft from ships harry lijzenga 6/29/03

Re: vibration in shaft from ships Nestor Perez, Licensed Marine Engineer. 8/21/04

Re: vibration in shaft from ships 7/2/03

Re: vibration in shaft from ships Arne 7/7/03

Re: vibration in shaft from ships Arne 6/29/03

Re: vibration in shaft from ships Dave G. www.reliabilitydirect.com 6/29/03

Re: vibration in shaft from ships Dave G. www.reliabilitydirect.com 6/29/03

Vane Pass Frequency calculations for multistage pumps Chris Maharaj 6/26/03

Re: Vane Pass Frequency calculations for multistage pumps Walt Strong 6/26/03

Re: Vane Pass Frequency calculations for multistage pumps Sasaki 6/26/03

Re: Vane Pass Frequency calculations for multistage pumps Walt Strong 6/27/03

Re: Vane Pass Frequency calculations for multistage pumps Ron Hartlen 6/26/03

High 5x motor speed peak Chris Maharaj 6/26/03

Re: High 5x motor speed peak hugh.hackett@exeloncorp.com 7/24/03

Re: High 5x motor speed peak N.Satyanarayana nalla_satyanarayana@rediffmail.com 7/20/03

Re: High 5x motor speed peak N.Satyanarayana 7/20/03

Re: High 5x motor speed peak Walt Strong 6/26/03

New Theory of Rotor Dynamics Yu. Zhivotov 6/24/03

Re: New Theory of Rotor Dynamics Yu. Zhivotov 7/13/03

Re: New Theory of Rotor Dynamics GEORGE 7/13/03

Re: New Theory of Rotor Dynamics Yu.Zhivbotov 7/7/03

Re: New Theory of Rotor Dynamics George 7/3/03

Re: New Theory of Rotor Dynamics Yu. Zhivotov 7/3/03

Re: New Theory of Rotor Dynamics Yuriy Zhivotov 7/2/03

Re: New Theory of Rotor Dynamics Sasaki 7/4/03

Re: New Theory of Rotor Dynamics Yuriy Zhivotov 7/1/03

Re: New Theory of Rotor Dynamics Sasaki 7/1/03

Re: New Theory of Rotor Dynamics a-zhivotov 6/26/03

Re: New Theory of Rotor Dynamics Sasaki 6/26/03

Re: New Theory of Rotor Dynamics Ron Hartlen 6/24/03

Re: New Theory of Rotor Dynamics Sasaki 6/24/03

Re: New Theory of Rotor Dynamics Arne 6/24/03

Wanted: Emonitor Odyssey Software Ricardo Cravino 6/24/03

Machinery Vibration Analysis I Test Ryanbab 6/23/03

Re: Machinery Vibration Analysis I Test Arne.Lindholm 6/24/03

Re: Machinery Vibration Analysis I Test Sasaki 6/26/03

Re: Machinery Vibration Analysis I Test Dana 6/26/03

Re: Machinery Vibration Analysis I Test Sasaki 6/26/03

Re: Machinery Vibration Analysis I Test Sasaki 6/26/03

Corrective Balancing Software rirayme@wcnoc.com 6/23/03

Re: Corrective Balancing Software Ken 7/19/03

Re: Corrective Balancing Software Arne.Lindholm 6/24/03

Re: Corrective Balancing Software rirayme@wcnoc.com 6/25/03

Cepstrum vs Enveloping Willem 6/23/03

Re: Cepstrum vs Enveloping Johannes 10/25/04

3x Rotational Frequency of Felt Roll alan.okell@upm-kymmene.com 6/22/03

Re: 3x Rotational Frequency of Felt Roll Shaker 7/16/03

Re: 3x Rotational Frequency of Felt Roll Arne.Lindholm 6/22/03

Replacement bearings H. Lijzenga 6/20/03

Re: Replacement bearings Willem 6/23/03

Vibration Probe for Electrical motor and Cooler Fan bearing shed 6/19/03

Re: Vibration Probe for Electrical motor and Cooler Fan bearing Ken 7/19/03

Re: Vibration Probe for Electrical motor and Cooler Fan bearing Dave G. www.reliabilitydirect.com 6/22/03

Re: Vibration Probe for Electrical motor and Cooler Fan bearing Arne 6/20/03

Is it rotor bow or imbalance? Cal G 6/16/03

Re: Is it rotor bow or imbalance? Ken 7/19/03

Re: Is it rotor bow or imbalance? Alex J 6/23/03

Re: Is it rotor bow or imbalance? Steve Schultheis 6/17/03

Re: Is it rotor bow or imbalance? CalG 6/17/03

Re: Is it rotor bow or imbalance? Walt Strong 6/17/03

Re: Is it rotor bow or imbalance? CalG 6/18/03

particle velocity / sound intensity applications Alex Koers, Microflown Technologies , Netherlands 6/16/03

Re: particle velocity / sound intensity applications Walt Strong 6/16/03

Re: particle velocity / sound intensity applications Alex Koers 6/22/03

Lomikin Effect Brent Barry 6/16/03

Re: Lomikin Effect Arne.Lindholm 6/16/03

Re: Lomikin Effect Sasaki 6/18/03

Re: Lomikin Effect Arne.Lindholm 6/20/03

Re: Lomikin Effect Sasaki 6/22/03

Load related Resonance in Fans pavithran 6/12/03

Re: Load related Resonance in Fans steve 6/19/03

Re: Load related Resonance in Fans jazzhome@yahoo.com.hk 6/17/03

Re: Load related Resonance in Fans Alex J 6/12/03

Re: Load related Resonance in Fans Walter Strong 6/12/03

Harmonics of 0.5 rpm in DG gairish 6/9/03

Re: Harmonics of 0.5 rpm in DG Walter Strong 6/9/03

Integrator vibration transmitter rTyler 6/6/03

Re: Integrator vibration transmitter E Murphy 6/6/03

VIBRATION MACHINE TOOLS MÁRCIO TADEU - BRAZIL 6/3/03

Re: VIBRATION MACHINE TOOLS Walt Strong 6/4/03

Trying to Locate a Book LLoyd Johnson 6/3/03

Re: Trying to Locate a Book vibratek@vibratek.com.tr 8/8/03

Re: Trying to Locate a Book Walt Strong 6/4/03

Re: Trying to Locate a Book Charlie cs2mh@aol.com 6/3/03

High Vibrations on Roots Blowers???? RF 6/3/03

Re: High Vibrations on Roots Blowers???? koemkoem 6/10/03

Re: High Vibrations on Roots Blowers???? Shawn 6/10/03

Re: High Vibrations on Roots Blowers???? MachineryWatch 6/3/03

Re: High Vibrations on Roots Blowers???? Arne 6/3/03

Fixturing Dave Caletka 6/2/03

Re: Fixturing raju_ss342@rediffmail.com 1/6/05

Re: Fixturing Jedsada 8/7/03

About the Profile Plot Lin Zhenyao (From P.R.China: Lzyao@ynmail.com) 5/29/03

SCR Frequencirs DNK 5/28/03

Re: SCR Frequencirs Maka 5/29/03

Availablity of software/ international standard to fix the vibration monitoring frequency Raj 5/27/03

Re: Availablity of software/ international standard to fix the vi... Arne 5/27/03

Paper on phase analysis for Crack propagation pradeep_agrawalin@rediffmail.com 5/26/03

Re: Paper on phase analysis for Crack propagation Dave G. www.reliabilitydirect.com 5/27/03

Re: Paper on phase analysis for Crack propagation 7/29/03

Re: Paper on phase analysis for Crack propagation Arne 5/27/03

IRD old software dbeard@rtconline.com 5/26/03

Re: IRD old software CORNETM@RJRT.COM 7/23/04

Frequencies for SKF bearing Keith 5/26/03

Re: Frequencies for SKF bearing Ricardo Cravino 6/18/03

Re: Frequencies for SKF bearing Petri.korhonen@bhpsteel.com 5/26/03

High Frequency in Slip ring motor artit_k2002.yahoo.com 5/26/03

Re: High Frequency in Slip ring motor Maka 5/29/03

Re: High Frequency in Slip ring motor E Murphy 5/26/03

WANTED: DATA COLLECTOR -ANALYZER RR 5/24/03

Re: WANTED: DATA COLLECTOR -ANALYZER j_obrien@ntlworld.com 4/20/05

Re: WANTED: DATA COLLECTOR -ANALYZER j_obrien@ntlworld.com 4/20/05

Re: WANTED: DATA COLLECTOR -ANALYZER j_obrien@ntlworld.com 4/20/05

Re: WANTED: DATA COLLECTOR -ANALYZER tbaer@minnkota.com 3/26/04

Re: WANTED: DATA COLLECTOR -ANALYZER tbaer@minnkota.com 3/26/04

Re: WANTED: DATA COLLECTOR -ANALYZER tbaer@minnkota.com 3/26/04

Re: WANTED: DATA COLLECTOR -ANALYZER 2/15/04

Re: WANTED: DATA COLLECTOR -ANALYZER Dave G. www.reliabilitydirect.com 5/25/03

Re: WANTED: DATA COLLECTOR -ANALYZER dbeard@rtconline.com 5/25/03

Re: WANTED: DATA COLLECTOR -ANALYZER Mike T 5/5/04

Re: WANTED: DATA COLLECTOR -ANALYZER M.T. 5/5/04

Re: WANTED: DATA COLLECTOR -ANALYZER Mike Tendeck 5/5/04

Re: WANTED: DATA COLLECTOR -ANALYZER Bill Matters 10/1/03

Re: WANTED: DATA COLLECTOR -ANALYZER vibratec@ec-red.com 9/16/03

Re: WANTED: DATA COLLECTOR -ANALYZER Arne 5/24/03

The Target on Shaft Surface? Lin Zhenyao (From P.R.China: Lzyao@ynmail.com) 5/23/03

Re: The Target on Shaft Surface? Alex J 5/27/03

Re: The Target on Shaft Surface? Alex J 5/27/03

Re: The Target on Shaft Surface? steve schultheis 5/23/03

bently monitors giridhar 5/22/03

Re: bently monitors Steve Schultheis 5/23/03

Wound Rotor Motors MachineryWatch 5/22/03

Balancing Multi-Stage Feed Pump Ali Al-Shurafa 5/22/03

Re: Balancing Multi-Stage Feed Pump Terry Tomlinson 5/28/03

Re: Balancing Multi-Stage Feed Pump Sasaki 5/23/03

Vertical Turbine Pump Eddy Current Drives dleach@pawc.com 5/22/03

Re: Vertical Turbine Pump Eddy Current Drives 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives Chris Culver 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives Chris Culver 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives Chris Culver 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives Chris Culver 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives Chris Culver 10/6/03

Re: Vertical Turbine Pump Eddy Current Drives jekstromer@gulf-states.com 8/30/03

Re: Vertical Turbine Pump Eddy Current Drives ken chen 9/8/04

pdm program mark fitzpatrick 5/21/03

Bandsaw vibration frequencies tamorrison@hibbsinc.com 5/21/03

Re: Bandsaw vibration frequencies grady@envibe.com 6/11/03

Re: Bandsaw vibration frequencies Walt Strong 6/3/03

Re: Bandsaw vibration frequencies 5/22/03

Re: Bandsaw vibration frequencies 5/22/03

Re: Bandsaw vibration frequencies Arne 5/22/03

Turbine "oil whirl" problem lxchen@actog.com 5/20/03

Re: Turbine "oil whirl" problem Carlos Hein 5/21/03

Re: Turbine "oil whirl" problem lxchen@actog.com 5/20/03

PdM program Simon Weil 5/20/03

Re: PdM program F.V. Alford 11/4/03

Re: PdM program Sunil 10/24/03

Re: PdM program Dodd Mize 7/7/03

Re: PdM program Frederick Gallardo 5/21/03

Re: PdM program Marty Wilkins 5/21/03

Re: PdM program Shawn 5/21/03

Re: PdM program mark fitzpatrick 5/21/03

Re: PdM program Drake Roberts 5/20/03

Re: PdM program Alan Friedman 5/20/03

Residual Unbalance Calculation Dostie 5/20/03

Re: Residual Unbalance Calculation Hello Dostie 5/30/03

email for ARNE mike.cooney@dowdingandmills.com 5/20/03

active damping elihui@pmail.ntu.edu.sg 5/20/03

What collection specification settings do I need when collecting time waveform mike.cooney@dowdingandmills.com 5/20/03

Re: What collection specification settings do I need when collect... vgarzani 3/15/04

Vacancy for Mechanical Engineer vibsnd@singnet.com.sg 5/19/03

Re: Vacancy for Mechanical Engineer 8/16/04

twice line freq, line freq and pole pass frequency Jason 5/18/03

Re: twice line freq, line freq and pole pass frequency Arne 5/18/03

Re: twice line freq, line freq and pole pass frequency Jason 5/19/03

Re: twice line freq, line freq and pole pass frequency Arne 5/19/03

twice line freq, line freq and pole pass frequency Jason 5/17/03

Aliasing dnk 5/16/03

Re: Aliasing MachineryWatch 5/17/03

high axial vibes on motor bearings michael s.downie 5/16/03

Re: high axial vibes on motor bearings Dana 6/26/03

Re: high axial vibes on motor bearings Arne 5/16/03

Re: high axial vibes on motor bearings Arne 5/16/03

Re: high axial vibes on motor bearings 5/19/03

axial measuring point in fd fan cmp 5/15/03

Re: axial measuring point in fd fan Arne 5/16/03

Spike Energy vs HFD mperkins 5/15/03

Re: Spike Energy vs HFD Ron Hartlen 5/18/03

Re: Spike Energy vs HFD Shawn 5/15/03

Re: Spike Energy vs HFD mperkins 5/16/03

Re: Spike Energy vs HFD 9/3/04

Re: Spike Energy vs HFD 5/16/03

Re: Spike Energy vs HFD skjha03@ntpc.co.in 8/7/04

Re: Spike Energy vs HFD MachineryWatch 5/15/03

Determining motor RPM from Hertz RF 5/15/03

Re: Determining motor RPM from Hertz 8/7/04

Re: Determining motor RPM from Hertz BMC440 5/15/03

Re: Determining motor RPM from Hertz Ali Al-Shurafa 5/16/03

Re: Determining motor RPM from Hertz mike cooney 5/15/03

Re: Determining motor RPM from Hertz MachineryWatch 5/15/03

Compressor Instability Giridhar 5/14/03

Re: Compressor Instability laxmi_bhamidipati@yahoo.com 5/15/03

Re: Compressor Instability Arne 5/15/03

Re: Compressor Instability laxmi_bhamidipati@yahoo.com 5/16/03

Re: Compressor Instability Arne 5/17/03

Re: Compressor Instability laxmi_bhamidipati@yahoo.com 5/19/03

Re: Compressor Instability Arne 5/19/03

Re: Compressor Instability Arne 5/14/03

Vertical sump pump eday007@yahoo.com 5/14/03

Re: Vertical sump pump Arne 5/15/03

Re: Vertical sump pump eday007@yahoo.com 5/18/03

Re: Vertical sump pump teberhar@agrium.com 6/24/03

Re: Vertical sump pump pradeep_agrawalin@rediffmail.com 5/26/03

Cost Justify and ROI on Condition monitoring Program crbrown17@cox.net 5/13/03

Re: Cost Justify and ROI on Condition monitoring Program George D'Entremont, gxd1@pge.com 5/14/03

Cost Justify and ROI on Condition monitoring Program crbrown17@cox.net 5/13/03

Dear Arne, the Internet Servicer is OK Lin Zhenyao (From P.R.China: Lzyao@ynmail.com) 5/11/03

significance of phase analysis for higher order RPM guru 5/11/03

Re: significance of phase analysis for higher order RPM Ali Al-Shurafa 5/11/03

Re: significance of phase analysis for higher order RPM guru 5/12/03

Re: significance of phase analysis for higher order RPM Arne 5/15/03

Re: significance of phase analysis for higher order RPM guru 5/20/03

Re: significance of phase analysis for higher order RPM Ali Al-Shurafa 5/16/03

Yong man need guide on select reference book jiji_yaiyai@hotmail.com 5/10/03

Re: Yong man need guide on select reference book Ali Al-Shurafa 5/16/03

Enveloping Tyler 5/8/03

Re: Enveloping Dave G. www.reliabilitydirect.com 5/8/03

Re: Enveloping 5/8/03

VFD Motors - Acceptance Testing g. d'Entremont 5/7/03

2 plane dynamic balancing software wandadogmeat@att.net 5/7/03

Re: 2 plane dynamic balancing software mwdyno@arnet.com.ar 9/20/04

Re: 2 plane dynamic balancing software Dave G. www.reliabilitydirect.com 5/7/03

Conversion of Vibration readings Gerardo Delgado 5/7/03

Re: Conversion of Vibration readings pradeep_agrawalin@rediffmail.com 5/19/03

Re: Conversion of Vibration readings ibrahimhc@vibratek.com.tr 5/9/03

Re: Conversion of Vibration readings Dave G. www.reliabilitydirect.com 5/7/03

Re: Conversion of Vibration readings Ali Al-Shurafa 10/27/03

DG SET PROBLEM MALLIKARJUN 5/6/03

id fan vibration problem arvin 5/2/03

Re: id fan vibration problem Arne 5/3/03

Noise and vibration cosulting companies J. thomas 5/2/03

Re: Noise and vibration cosulting companies wdm@mechsol.com 7/4/03

Re: Noise and vibration cosulting companies cbris@charter.net 5/15/03

Re: Noise and vibration cosulting companies Joe B. 5/13/03

Re: Noise and vibration cosulting companies Eben Nash 5/13/03

Re: Noise and vibration cosulting companies W. Strong 5/11/03

Re: Noise and vibration cosulting companies MachineryWatch 5/7/03

Re: Noise and vibration cosulting companies Frederick Gallardo 5/6/03

Re: Noise and vibration cosulting companies Dave G. www.reliabilitydirect.com 5/5/03

Re: Noise and vibration cosulting companies Dennis 5/5/03

Re: Noise and vibration cosulting companies Viktor718@aol.com 11/29/03

cleanroom cart vibration isolation jcs@pro-fab.com 5/1/03

Re: cleanroom cart vibration isolation wim32 5/6/03

Accelerometer Nasir Naqvi 5/1/03

Universal Drive Shaft Alan Okell 5/1/03

Re: Universal Drive Shaft Noggs 5/12/03

Re: Universal Drive Shaft Alex J 5/1/03

Re: Universal Drive Shaft Alan Okell 5/2/03

Re: Universal Drive Shaft Alex J 5/6/03

Universal Drive Shaft Alan Okell 5/1/03

Re: Universal Drive Shaft Gerry 5/2/03

Re: Universal Drive Shaft Bim 5/2/03

Juan Carlos Huete Lima, Peru 4/29/03

Re: Juan Carlos Huete Dave G. www.reliabilitydirect.com 4/29/03

AUTOMOTIVE FAN/BLOWER VIB TEST STDS twagenor@revcor.com 4/28/03

prism4 software wldcreek@hotmail.com 4/26/03

Re: prism4 software veera9 4/28/03

Re: prism4 software wldcreek@hotmail.com 4/28/03

Re: prism4 software Dan Bradley 4/28/03

Pulsation phenomena in induction electric motors Marc ( mvilaf@repsolypf.com ) 4/25/03

Re: Pulsation phenomena in induction electric motors 5/10/05

Re: Pulsation phenomena in induction electric motors 10/5/03

Re: Pulsation phenomena in induction electric motors Shawn 4/29/03

Re: Pulsation phenomena in induction electric motors g. d'Entremont, gxd1@pge.com 4/25/03

Re: Pulsation phenomena in induction electric motors E Murphy 4/25/03

vibration on high frequency joko_sw2000@yahoo.com 4/21/03

Articles about Vibration Phase Lin Zhenyao (From P.R.China: Lzyao@ynmail.com) 4/18/03

Re: Articles about Vibration Phase Bim 5/2/03

What collection specification does a balancing kit use? mike cooney 4/16/03

Re: What collection specification does a balancing kit use? joko_sw2000@yahoo.com 4/21/03

Re: What collection specification does a balancing kit use? Charlie cs2mh@aol.com 4/16/03

Re: What collection specification does a balancing kit use? ibrahimhc@vibratek.com.tr 4/16/03

Re: What collection specification does a balancing kit use? Mike Cooney 4/18/03

Re: What collection specification does a balancing kit use? ibrahimhc@vibratek.com.tr 4/19/03

Re: What collection specification does a balancing kit use? mike.cooney@dowdingandmills.com 4/23/03

Nash Vacuum Pumps Mike West email;westmr@bowinc.com 4/16/03

Re: Nash Vacuum Pumps Patrick <mtimburwa@mbpm.artcorp.co.zw> 11/21/03

Re: Nash Vacuum Pumps 6/19/03

Re: Nash Vacuum Pumps Arne 4/16/03

Precision vibration Jack 4/16/03

Re: Precision vibration Tom Irvine, tomirvine@aol.com 4/16/03

Changing Motor Natural Frequency RGF 4/15/03

Re: Changing Motor Natural Frequency viblee@kps.co.kr 4/17/03

Re: Changing Motor Natural Frequency rgf 4/15/03

Re: Changing Motor Natural Frequency E Murphy 4/15/03

Re: Changing Motor Natural Frequency MH 4/15/03

Re: Changing Motor Natural Frequency MH 4/15/03

Re: Changing Motor Natural Frequency MH 4/15/03

Re: Changing Motor Natural Frequency MachineryWatch 4/15/03

Solar Turbine Steve 4/15/03

Re: Solar Turbine Dan 5/28/03

Re: Solar Turbine veera 4/16/03

Active Balancing? Stew 4/14/03

Re: Active Balancing? mike.robichaud@bretech.com 4/24/03

Re: Active Balancing? Arne 4/14/03

Re: Active Balancing? Stew 4/14/03

Re: Active Balancing? Arne 4/14/03

Cylinder Firing Frequency Hanzala 4/14/03

Strange Gearbox Vibration Dean 4/11/03

Re: Strange Gearbox Vibration W.Strong 4/12/03

Very little info Arne 4/11/03

comparison of CEMB - N402 with IRD data pack 1500 arvin 4/11/03

Re: comparison of CEMB - N402 with IRD data pack 1500 ibrahimhc@vibratek.com.tr 4/16/03

Wanted Prism4 & CMVA60 Michael Kolar (mkolar@pmbi.net) 4/9/03

Re: Wanted Prism4 & CMVA60 Dave G. www.reliabilitydirect.com 4/9/03

Re: Wanted Prism4 & CMVA60 Mike Barnett 4/9/03

saw dullness in steel application Preston Johnson 4/8/03

Re: saw dullness in steel application W.Strong 4/12/03

Re: saw dullness in steel application E Murphy 4/8/03

ecc sensors on turbine pump set Preston Johnson 4/8/03

Re: ecc sensors on turbine pump set Dave G. www.reliabilitydirect.com 4/9/03

Re: ecc sensors on turbine pump set Mark Dimond 4/9/03

What Is Vibration Phase? Lin Zhenyao from P.R.China . Lzyao@ynmail.com 4/8/03

Re: What Is Vibration Phase? Shed 5/9/03

Re: What Is Vibration Phase? Shed 5/9/03

Re: What Is Vibration Phase? Shawn 4/8/03

Low frequency sensor Taoufik Oualhadj 4/7/03

Re: Low frequency sensor Dave G., www.reliabilitydirect.com 4/9/03

Re: Low frequency sensor Taoufik O. toualhadj@sympatico.ca 4/11/03

Re: Low frequency sensor Taoufik O 4/11/03

IUTAM и IFToMM Yuriy Zhivotov 4/7/03

Re: IUTAM и IFToMM Yuriy Zhivotov 4/8/03

Re: IUTAM ? IFToMM 4/7/03

Liebert raised floor cooling units( High 1x MS ) Greg Meyer- Vibration analyst- Poughkeepsie IBM 4/7/03

Re: Liebert raised floor cooling units( High 1x MS ) brady 2/7/04

References for compaction equipment damaging buildings? mwlivingston@hotmail.com 4/7/03

Filters Keith 4/5/03

Long sump pump dilemma eday007@yahoo.com 4/5/03

Re: Long sump pump dilemma Arne 4/5/03

Re: Long sump pump dilemma Ali Al-Shurafa 4/9/03

Condition Monitoring Information emapeterson@hotmail.com 4/5/03

Re: Condition Monitoring Information Steve 4/12/03

Re: Condition Monitoring Information s2.zhang@qut.edu.au 4/5/03

Re: Condition Monitoring Information Manoj 4/11/03

Vibration Test for Fasteners Steven Meyer 4/3/03

Re: Vibration Test for Fasteners maxime.thonnerieux@cetim.fr 7/12/04

Re: Vibration Test for Fasteners Lee Miller 5/14/04

Re: Vibration Test for Fasteners Lee Miller 5/14/04

Re: Vibration Test for Fasteners Lee Miller 5/14/04

Re: Vibration Test for Fasteners 4/7/04

Re: Vibration Test for Fasteners Russ Barnes russbarnes@est-usa.com 10/2/03

Sleeve bearing phase change & large 1x increase Rich 4/3/03

Re: Sleeve bearing phase change & large 1x increase Wiriton 4/24/03

Re: Steve, excellent call! I second it. ibrahimhc@vibratek.com.tr 4/7/03

Re: Sleeve bearing phase change & large 1x increase Steve Schultheis 4/3/03

Re: Sleeve bearing phase change & large 1x increase Steve Schultheis 4/5/03

Vibration in Turbine exhaust conduct Victor Duarte 4/3/03

Re: Vibration in Turbine exhaust conduct Byron Martin 4/30/03

Re: Vibration in Turbine exhaust conduct Victor Duarte 5/21/03

Commercial test rigs for fault signal simulating and collecting? s2.zhang@qut.edu.au 4/1/03

Re: Commercial test rigs for fault signal simulating and collect... ibrahimhc@vibratek.com.tr 4/2/03

Re: Commercial test rigs for fault signal simulating and coll... 4/4/03

Re: Commercial test rigs for fault signal simulating and coll... mike.cooney@dowdingandmills.com 4/4/03

Re: Commercial test rigs for fault signal simulating and coll... 4/5/03

motor vibration helen 4/1/03

Re: motor vibration ibrahimhc@vibratek.com.tr 4/2/03

motor vibration helen 4/1/03

Q Factor (Dampening) MH 4/1/03

Re: Q Factor (Dampening) W. strong 4/2/03

Q Factor (Dampening) MH 4/1/03

Sub- and super-Gaussian signals Yiakopoulos Christos 4/1/03

Super-Gausian and sub-Gaussian signals 4/1/03

Can someone email this file I can not open the web site hovon@eastman.com 3/27/03

EFFTEK website seems to be closed, but.... Arne 3/31/03

ISO 1940 with shop balancing machines artit_k2002.yahoo.com 3/27/03

Re: ISO 1940 with shop balancing machines vibrabal@aol.com 12/18/04

Re: ISO 1940 with shop balancing machines petremuller@yahoo.com 10/10/03

Re: ISO 1940 with shop balancing machines Terry Tomlinson 4/5/03

solar engine unit vibration problem almryed@yahoo.com 3/27/03

Re: solar engine unit vibration problem Teberhar@agrium.com 4/14/03

Re: solar engine unit vibration problem Ing. Javier Rodríguez 4/1/03

Re: solar engine unit vibration problem Theo 3/27/03

Re: solar engine unit vibration problem 3/28/03

Re: solar engine unit vibration problem ibrahimhc@vibratek.com.tr 3/27/03

Re: solar engine unit vibration problem 3/27/03

Re: solar engine unit vibration problem almryed 3/30/03

Article 3912 3/25/03

High vibration inline vertical fan Howard Anderson 3/25/03

Re: High vibration inline vertical fan Mike 3/26/03

Re: High vibration inline vertical fan MachineryWatch 3/25/03

PL302 COLLECTOR ANALYSER MICHEL TREMBLAY 3/24/03

Static or Dynamic Balancing R. Schreurs 3/24/03

Re: Static or Dynamic Balancing Terry Tomlinson 4/5/03

Re: Static or Dynamic Balancing Arne.Lindholm 3/31/03

different between Spike Energy &PeakVue faruqkh@yahoo.com 3/24/03

Re: different between Spike Energy &PeakVue 3/27/03

Re: different between Spike Energy &PeakVue Jim Crowe 3/25/03

Shop Balance Problem artit_k2002.yahoo.com 3/23/03

Re: Shop Balance Problem 8/27/03

Re: Shop Balance Problem 3/24/03

Re: Shop Balance Problem artit_k2002.yahoo.com 3/24/03

Re: Shop Balance Problem 3/25/03

Re: Shop Balance Problem Roger Hamby 4/10/03

comparison of datapack 1250/1500 with CEMP402 arvin 3/23/03

Re: comparison of datapack 1250/1500 with CEMP402 3/23/03

csi 2120 analyzer david 3/22/03

Re: csi 2120 analyzer Erickson 11/5/03

Re: csi 2120 analyzer Erickson 11/5/03

Re: csi 2120 analyzer 9/23/03

Re: csi 2120 analyzer a former turbine engine mfg. eng 7/25/03

Re: csi 2120 analyzer 6/10/03

Re: csi 2120 analyzer mallikarjun 5/2/03

HydroTurbine Cavitation MachineryWatch 3/21/03

Re: HydroTurbine Cavitation gerald.liu@shaw.ca 12/3/04

Re: HydroTurbine Cavitation ba7796@hotmail.com 10/19/04

Re: HydroTurbine Cavitation harsharansingh2@rediffmail.com 11/30/03

Re: HydroTurbine Cavitation W.Strong 3/22/03

Basic Knowledge About Vibration Phase? Lin Zhenyao (From P.R.China: lzyao@ynmail.com) 3/20/03

Re: Basic Knowledge About Vibration Phase? MachineryWatch 3/28/03

Centrifugal Pump Problems & Answers bin95us@yahoo.com 3/20/03

Basic Knowledge About Vibration Phase? Lin Zhenyao (From P.R.China: Lzyao@ynmail.com) 3/20/03

Number of revolutions needed for FTF detection Jeremy Cole 3/19/03

Re: Number of revolutions needed for FTF detection W.Strong 3/22/03

Re: Number of revolutions needed for FTF detection i 3/20/03

Re: Number of revolutions needed for FTF detection Arne 3/19/03

Time Interval for Collecting Vibration Signatures naqvin@bp.com 3/18/03

Re: Time Interval for Collecting Vibration Signatures Arne 3/19/03

Re: Time Interval for Collecting Vibration Signatures Arne 3/19/03

Re: Time Interval for Collecting Vibration Signatures ibrahimhc@vibratek.com.tr 3/20/03

HIGH SHAFT VIBRATION DURING COAST DOWN Wiriton 3/18/03

Re: HIGH SHAFT VIBRATION DURING COAST DOWN Posting files not possible 3/18/03

HIGH SHAFT VIBRATION DURING COAST DOWN WIRITON 3/18/03

Re: HIGH SHAFT VIBRATION DURING COAST DOWN popa.sorin@azomures.com 9/18/03

Re: HIGH SHAFT VIBRATION DURING COAST DOWN ibrahimhc@vibratek.com.tr 3/20/03

Re: HIGH SHAFT VIBRATION DURING COAST DOWN barry.westell@unilever.com 3/19/03

Datapac 1500 Wanted Johnsa 3/18/03

Vibration isolator for motor support Bernie 3/18/03

Re: Vibration isolator for motor support Arne 3/18/03

Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivotov@ukr.net Yuriy Zhivotov 3/18/03

Re: Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivot... Yuriy Zhivotov 3/23/03

test jorge 3/17/03

Gas Turbine Efficiency Dave G 3/17/03

Re: Gas Turbine Efficiency Sanjay Kumar IIT Kanpur ,Student 6/11/04

Re: Gas Turbine Efficiency Turbine Solutions, Inc. 10/1/03

Re: Gas Turbine Efficiency Dodd_Mize@Dresser-Rand.com 3/27/03

Re: Gas Turbine Efficiency Dodd_Mize@Dresser-Rand.com 3/27/03

Re: Gas Turbine Efficiency Dodd_Mize@Dresser-Rand.com 3/27/03

Re: Gas Turbine Efficiency Dave G. www.reliabilitydirect.com 3/17/03

Re: Gas Turbine Efficiency ibrahimhc@vibratek.com.tr 3/18/03

Re: Gas Turbine Efficiency Dave G. www.reliabilitydirect.com 3/19/03

Motor size vs Soft foot Sasaki 3/16/03

Re: Motor size vs Soft foot Max Roeder 5/28/03

Re: Motor size vs Soft foot W.Strong 3/22/03

Re: Motor size vs Soft foot Sasaki 3/23/03

Re: Motor size vs Soft foot W.Strong 3/25/03

Re: Motor size vs Soft foot Sasaki 3/25/03

Re: Motor size vs Soft foot W.Strong 3/27/03

Re: Motor size vs Soft foot Arne 3/17/03

Re: Motor size vs Soft foot Sasaki 3/17/03

Re: Motor size vs Soft foot Sasaki 3/17/03

Re: Motor size vs Soft foot Arne 3/17/03

Rotor Bar Frequency Dennis Kiene 3/14/03

Re: Rotor Bar Frequency W.Strong 3/22/03

Re: Rotor Bar Frequency Arne.Lindholm 3/16/03

Re: Rotor Bar Frequency ibrahimhc@vibratek.com.tr 3/15/03

Wanted - Data logging software wldcreek@hotmail.com 3/13/03

Re: Wanted - Data logging software zeinstra@wxs.nl 3/14/03

Re: Wanted - Data logging software wldcreek@hotmail.com 3/14/03

Re: Wanted - Data logging software Arne.Lindholm 3/15/03

Re: Wanted - Data logging software willy 3/16/03

Planetairy gearbox zeinstra@wxs.nl 3/13/03

Re: Planetairy gearbox ibrahimhc@vibratek.com.tr 3/15/03

Proximity Probes Dommy 3/12/03

Re: Proximity Probes E Murphy 3/14/03

Re: Proximity Probes Steve Schultheis 3/13/03

Re: Proximity Probes Dave, www.reliabilitydirect.com 3/12/03

Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivotov@ukr.net Yuriy Zhivotov 3/12/03

Re: Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivot... A.Zhivotov 3/24/03

Re: Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivot... Yuriy Zhivotov 3/23/03

Re: Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivot... Yuriy Zhivotov 3/18/03

Give us a Cash Curse or a Dummies Text on it! Arne.Lindholm 3/15/03

Re: Comments to Zhivotov's New Theory of Rotor Dynamics. a-zhivot... ibrahimhc@vibratek.com.tr 3/15/03

High 2X Lobe Pass Frecuency Screw Compresor H Steves 3/11/03

Re: High 2X Lobe Pass Frecuency Screw Compresor Arne.Lindholm 3/16/03

Re: High 2X Lobe Pass Frecuency Screw Compresor Hammer 4/2/03

Gear Noise Ramsey 3/10/03

Re: Gear Noise Ing. Javier Rodríguez 3/24/03

Re: Gear Noise W.Strong 3/22/03

Re: Gear Noise zeinstra@wxs.nl 3/19/03

PSD input multiplication tdh 3/10/03

Re: PSD input multiplication Tom Irvine, tomirvine@aol.com 3/13/03

rise and fall of vibration velocity in FD fan gunse@hclinfinet.com 3/10/03

Re: rise and fall of vibration velocity in FD fan Alan F 3/11/03

Re: rise and fall of vibration velocity in FD fan gunse 3/12/03

pulsation vibration fromn recip comp. W. Norris 3/9/03

pulsation vibration fromn recip comp. W. Norris 3/9/03

acceleration vibration measurement in gas turbine engine awathi@yahoo.com 3/9/03

Re: acceleration vibration measurement in gas turbine engine Dodd_ Mize@ Dresser-Rand.com 3/27/03

Re: acceleration vibration measurement in gas turbine engine chobsaard@navy.mi.th 3/9/03

Setting up data points on a shaker screen eccentric bearings I need some suggestions. Judd 3/8/03

Re: Setting up data points on a shaker screen eccentric bearings ... Keith K. 3/17/03

A.C Motor High Vibration Problem Mahalingam 3/7/03

Re: A.C Motor High Vibration Problem Jim Crowe 3/10/03

Re: A.C Motor High Vibration Problem Mahalingam 3/12/03

Re: A.C Motor High Vibration Problem guna 3/12/03

Re: A.C Motor High Vibration Problem Mahalingam 3/12/03

Re: A.C Motor High Vibration Problem Jim Crowe 3/12/03

Re: A.C Motor High Vibration Problem Jim P 3/8/03

Re: A.C Motor High Vibration Problem Mahalingam 3/10/03

Re: A.C Motor High Vibration Problem skmrao 3/7/03

Re: A.C Motor High Vibration Problem Mahalingam 3/10/03

Specifications ASME, PTC Preston Johnson 3/6/03

Re: Specifications ASME, PTC C. Hunter Cloud 3/6/03

Relation between RPM and CPM naqvin@bp.com 3/6/03

Re: Relation between RPM and CPM ibrahimhc@vibratek.com.tr 3/15/03

Re: Relation between RPM and CPM Dana 3/11/03

Re: Relation between RPM and CPM Dave 3/6/03

Re: Relation between RPM and CPM shed 3/10/03

Vibration readings on Diesel Keith 3/6/03

Re: Vibration readings on Diesel NickR 7/14/03

Re: Vibration readings on Diesel zeinstra@wxs.nl 3/13/03

SKF vs. CSI for Low SPeed Mearuremetns cbris@charter.net 3/6/03

Re: SKF vs. CSI for Low SPeed Mearuremetns judson@mindspring.com 3/18/03

Re: SKF vs. CSI for Low SPeed Mearuremetns Marty 3/10/03

Re: SKF vs. CSI for Low SPeed Mearuremetns Mike 3/6/03

Re: SKF vs. CSI for Low SPeed Mearuremetns shawn 3/6/03

soft foot guru 3/5/03

Re: soft foot Dave G. www,reliabilitydirect.com 3/5/03

Re: soft foot Shawn 3/5/03

Re: soft foot Jim F 3/7/03

Re: soft foot Jim F 3/7/03

vib. on pump calcu 3/5/03

Re: vib. on pump Alex J 3/6/03

high vib. in horizontl series pump derick 3/5/03

Re: high vib. in horizontl series pump Phil 1/12/04

Re: high vib. in horizontl series pump DAVID 4/3/03

Re: high vib. in horizontl series pump Alex J 3/5/03

high vib. in vertical pump sham 3/5/03

Diesel Engine vibrations skmr 3/5/03

Re: Diesel Engine vibrations Gus 8/11/04

Alky Contactor (Stratco) 3X Vibration damaheu@orionrefining.com 2/27/03

Rail Car Wheel Vibrations - Looking for Cracks Preston Johnson 2/26/03

Re: Rail Car Wheel Vibrations - Looking for Cracks tajjj 11/18/03

Re: Rail Car Wheel Vibrations - Looking for Cracks W.Strong 3/27/03

Re: Rail Car Wheel Vibrations - Looking for Cracks MachineryWatch 2/27/03

Re: Rail Car Wheel Vibrations - Looking for Cracks mheijd@technofysica.nl 2/27/03

Re: Rail Car Wheel Vibrations - Looking for Cracks Preston Johnson 3/6/03

Lubrication Keith 2/25/03

Re: Lubrication hayes 3/3/03

Re: Lubrication Steve 2/26/03

'plastic' cooling tower limits mheijd@technofysica.nl 2/25/03

High 4X Vibration on AC Motor C.Dostie 2/23/03

Re: High 4X Vibration on AC Motor pradeep_agrawalin@rediffmail.com 5/19/03

Re: High 4X Vibration on AC Motor E Murphy 2/23/03

Re: High 4X Vibration on AC Motor Arne.Lindholm 2/23/03

High 4X Vibration on AC Motor C.Dostie 2/23/03

Re: High 4X Vibration on AC Motor steve 2/27/03

High freq measurements for slow speed brg analysis Tony Wofford 2/21/03

Re: High freq measurements for slow speed brg analysis info@beizein.nl 3/1/03

IRD OR ENTEK DOS SOFTWARE KEY JEROME FITZPATRICK 2/20/03

FFT spectrum Gevanag 2/19/03

Re: FFT spectrum Arne.Lindholm 2/23/03

Re: FFT spectrum Gevenag 2/24/03

Re: FFT spectrum Arne.Lindholm 2/24/03

Lobe Frequency Jim French 2/19/03

Re: Lobe Frequency MachineryWatch 2/20/03

Re: Lobe Frequency Dirk Zeinstra 3/1/03

Simulink en9djb@bath.ac.uk 2/19/03

Re: Simulink Preston Johnson 2/25/03

Standard API 617 it. 2.9.5.5. jurryb@themail.com 2/18/03

Re: Standard API 617 it. 2.9.5.5. Alex J 2/19/03

piezo electric crystals lee degraw 2/17/03

Re: piezo electric crystals Tom Irvine 2/19/03

vibration analysis of AC induction motors aboggs@Alleghenyenergy.com 2/14/03

Re: vibration analysis of AC induction motors Marcel 2/15/03

Universal joint frequencies pmshop@interstatepaper.com 2/13/03

Re: Universal joint frequencies E Murphy 2/14/03

Re: Universal joint frequencies info@beizein.nl 2/14/03

Re: Universal joint frequencies MachineryWatch 2/13/03

Re: Universal joint frequencies Scott 2/14/03

Re: Universal joint frequencies zeinstra@wxs.nl 3/13/03

Re: Universal joint frequencies Alex J 3/10/03

Project Manager for Power Plant vibsnd@singnet.com.sg 2/13/03

scale model Willem 2/11/03

Coasting down vibration freelancer 2/10/03

Re: Coasting down vibration Theo 2/11/03

Re: Coasting down vibration freelancer 2/10/03

Re: Coasting down vibration Arne 2/11/03

Fluid Coupling BAF 2/10/03

Re: Fluid Coupling nsteel@kornet.net 11/10/03

Re: Fluid Coupling dutaflow@indosat.net.id 2/21/05

Re: Fluid Coupling dutaflow@indosat.net.id 2/21/05

Re: Fluid Coupling Allen Plymon 3/8/03

Re: Fluid Coupling Dan 2/19/03

Re: Fluid Coupling E Murphy 2/12/03

Re: Fluid Coupling Theo 2/11/03

Re: Fluid Coupling MachineryWatch 2/10/03

ELECTRIC MOTOR ROTOR BAR TEST CHARLIE SPAINHOUR 2/10/03

Re: ELECTRIC MOTOR ROTOR BAR TEST Ronnie 3/14/03

Electric motor bar integrity check. Arne 2/10/03

ELECTRIC MOTOR ROTOR BAR TEST CHARLIE SPAINHOUR 2/10/03

high vertical vibration at solar gas turbine awathi@yahoo.com 2/10/03

High Horizontal Motor Vibration Allan McPartland 2/9/03

Re: High Horizontal Motor Vibration Theo 2/10/03

Re: High Horizontal Motor Vibration Allan 2/10/03

Re: High Horizontal Motor Vibration Theo 2/11/03

Re: High Horizontal Motor Vibration viblee@kps.co.kr 2/9/03

Bearing Frequencies Keith 2/7/03

Re: Bearing Frequencies Arne 2/7/03

Modeling Rolling Element Bearing Faults Todd 2/6/03

Re: Modeling Rolling Element Bearing Faults Theo 2/7/03

Savings Accounting JM Tejera 2/6/03

Vibration Monitoring For Generator set shed 2/5/03

Re: Vibration Monitoring For Generator set Willem 2/11/03

High freq. vibration in motors andrew.sit@opg.com 2/5/03

Re: High freq. vibration in motors hayes 3/3/03

Re: High freq. vibration in motors Charlie cs2mh@aol.com 2/5/03

Characteristics of a Light Rub Paul Dowdican 2/5/03

Re: Characteristics of a Light Rub Steve Schultheis 2/6/03

fan cooler benmoulai2001@yahoo.fr 2/5/03

high horizontal vib K.G.subramanian 2/5/03

Re: high horizontal vib viblee@kps.co.kr 2/9/03

Axial/ thrust probe installation Mike 2/3/03

Re: Axial/ thrust probe installation Dave G. www.reliabilitydirect.com 2/4/03

Re: Axial/ thrust probe installation 2/4/03

1X Sideband Amin 1/31/03

Re: 1X Sideband ibrahimhc@vibratek.com.tr 2/12/03

Re: 2-pole motor electrical fault Arne 2/1/03

Scale model of gearbox for vibration study Murtuza Lokhandwalla 1/31/03

Re: Scale model of gearbox for vibration study Ron Hartlen 2/2/03

Re: Scale model of gearbox for vibration study Arne 2/1/03

4 channels recording vibration jurry@themail.com 1/31/03

Re: 4 channels recording vibration Sameeh Ismail 12/2/04

Re: 4 channels recording vibration 1/31/03

Re: 4 channels recording vibration Willem 2/11/03

Re: 4 channels recording vibration Steve Schultheis 1/31/03

Prism4 Software john.mol@blueyonder.co.uk 1/30/03

Re: Prism4 Software Mike Barnett 1/30/03

Vibracon Machine Support Elements anyone? uriah@bbdynamo.com 1/30/03

Re: Vibracon Machine Support Elements anyone? Willem 2/11/03

Re: Vibracon Machine Support Elements anyone? Arne 2/1/03

Re: Vibracon Machine Support Elements anyone? rmooij@technofysica.nl 2/5/03

Re: Vibracon Machine Support Elements anyone? Arne 2/7/03

Re: Vibracon Machine Support Elements anyone? manuel.vergara@newmont.com 10/26/04

CREST FACTOR?? uriah@bbdynamo.com 1/28/03

Re: CREST FACTOR?? E Murphy 1/29/03

Re: CREST FACTOR?? Alan Friedman 1/30/03

Connecting Rod Balancing Thomas Purackal<thomas_purackal@pic.com.kw> 1/26/03

Re: Connecting Rod Balancing 1/29/03

Re: Connecting Rod Balancing 1/29/03

Diesel engine - 2 X vibration Robert Jr 1/24/03

Re: Diesel engine - 2 X vibration Willem 2/11/03

Shaft Sizing Rule of Thumb Keith 1/24/03

High Axial Vibration at 1X in a liquid ring compressor Marc 1/22/03

Re: High Axial Vibration at 1X in a liquid ring compressor chlorotech@eth.net 12/9/04

Re: High Axial Vibration at 1X in a liquid ring compressor chlorotech@eth.net 12/9/04

Re: High Axial Vibration at 1X in a liquid ring compressor Nicolas Mosca 4/23/04

Re: High Axial Vibration at 1X in a liquid ring compressor Marc 7/8/04

Re: High Axial Vibration at 1X in a liquid ring compressor Marc 7/8/04

Re: High Axial Vibration at 1X in a liquid ring compressor 7/8/04

Re: High Axial Vibration at 1X in a liquid ring compressor mvilaf@repsolypf.com 2/10/03

Re: High Axial Vibration at 1X in a liquid ring compressor mvilaf@repsolypf.com 2/10/03

Locked coupling recognition benderb@firstenergycorp.com 1/21/03

Boiler Feedpump Turbine Vibration Increase jherrmt@excite.com 1/21/03

Re: Boiler Feedpump Turbine Vibration Increase vibrator 9/2/04

Re: Boiler Feedpump Turbine Vibration Increase Ali Moharrer 2/3/03

Re: Boiler Feedpump Turbine Vibration Increase Venky_1971@hotmail.com 1/21/03

Re: Boiler Feedpump Turbine Vibration Increase Terry Herrmann 1/22/03

Re: Boiler Feedpump Turbine Vibration Increase Jason Chen 1/22/03

SUDDEN INCREASE IN VIBRATION - PREDOMINANT 1X venky_1971@hotmail.com 1/21/03

Re: SUDDEN INCREASE IN VIBRATION - PREDOMINANT 1X ibrahimhc@vibratek.com.tr 1/23/03

Re: SUDDEN INCREASE IN VIBRATION - PREDOMINANT 1X Steve Schultheis 1/21/03

Re: SUDDEN INCREASE IN VIBRATION - PREDOMINANT 1X Terry Herrmann 1/22/03

Vibration Analysis in Hong Kong James Shepard 1/21/03

Re: Vibration Analysis in Hong Kong chany 10/29/03

Re: Vibration Analysis in Hong Kong ibrahimhc@vibratek.com.tr 1/23/03

Re: Vibration Analysis in Hong Kong Dave G. www.reliabilitydirect.com 1/21/03

Vibration Analysis in Hon Kong James Shepard 1/21/03

Re: Vibration Analysis in Hon Kong Julian Wang 2/7/03

Re: Vibration Analysis in Hon Kong jerardo martinez 1/22/03

vibration due to unbalance in coupling venky_1971@hotmail.com 1/19/03

Re: vibration due to unbalance in coupling Michael Titone 1/20/03

Re: vibration due to unbalance in coupling Arne 1/19/03

Re: vibration due to unbalance in coupling Venkatesh : Venky_1971@hotmail.com 1/20/03

Message to poster only Arne 1/20/03

VIBRATION DUE TO UNBALANCE IN COUPLING venky_1971@hotmail.com 1/19/03

The Inertial Theory of the rotor dynamics A. Zhivotov, a-zhivotov@ukr.net 1/19/03

Slow roll ?? Jazzhome@yahoo.com.hk 1/18/03

Re: Slow roll ?? Arne 1/18/03

multi channel analyzer rirayme@wcnoc.com 1/17/03

Re: multi channel analyzer E Murphy 1/22/03

Re: multi channel analyzer Chris.wilcox@mpina.com 1/22/03

Re: multi channel analyzer David Miller (uk) 1/21/03

High Axial Vib At Gen NDE addiqqa@yahoo.com 1/16/03

Re: High Axial Vib At Gen NDE MachineryWatch 1/16/03

Re: High Axial Vib At Gen NDE 1/16/03

Oil whirl and Oil whip George Anglin 1/15/03

Re: Oil whirl and Oil whip Laxmi Bhamidipati (laxmi_bhamidipati@yahoo.com) 3/19/03

Re: Oil whirl and Oil whip murthynvs@bhelhyd.co.in 12/14/04

Re: Oil whirl and Oil whip Mike 1/16/03

Re: Oil whirl and Oil whip Steve Schultheis 1/16/03

Re: Oil whirl and Oil whip E Murphy 1/15/03

Re: Oil whirl and Oil whip Shawn 1/15/03

Maq Drive Pump Diagnostics Paul Dowdican 1/14/03

Re: Maq Drive Pump Diagnostics Arne 1/14/03

Re: Maq Drive Pump Diagnostics wmick@cgtower.com 3/26/03

ird fastrack software key info@mdiag.com 1/13/03

VR glove pressure device netcam@teleport.com 1/11/03

Vibration Monitoring Interval. James 1/11/03

Re: Vibration Monitoring Interval. ibrahimhc@vibratek.com.tr 1/15/03

Re: Vibration Monitoring Interval. Arne 1/11/03

Vibration Ttransmission from a moving Train karko@internet.gr 1/8/03

Re: Vibration Ttransmission from a moving Train ibrahimhc@vibratek.com.tr 1/10/03

Foundation Stiffness rajendra.mistry@siemens.com 1/8/03

Re: Foundation Stiffness info@beizein.nl 2/14/03

Re: Foundation Stiffness Arne 1/11/03

Compressor Shaft Failures noorul_ibad@ici.com 1/8/03

Re: Compressor Shaft Failures E Murphy 1/8/03

Re: Compressor Shaft Failures noorul_ibad@ici.com 1/9/03

Re: Compressor Shaft Failures Shawn 1/8/03

Re: Compressor Shaft Failures MachineryWatch 1/8/03

What is "Mg" mean Peter 1/8/03

Re: What is "Mg" mean Shawn 1/8/03

Re: What is "Mg" mean skmrao 1/27/03

Re: What is "Mg" mean 2/4/03

Radiator Fan naqvin@bp.com 1/3/03

Re: Radiator Fan Dan Timberlake 1/21/03

Re: Radiator Fan E Murphy 1/4/03

Re: Radiator Fan MachineryWatch 1/3/03

Distillation trays damage - hydrodynamic vibration Sadananda Konchady 1/3/03

Re: Distillation trays damage - hydrodynamic vibration Karl Kolmetz 1/9/05

Re: Distillation trays damage - hydrodynamic vibration ibrahimhc@vibratek.com.tr 1/8/03

Unbalance Dommo 12/30/02

Re: Unbalance Arne 1/1/03

Why American Industries don't follow Metric system? Raymond 12/28/02

Re: Why American Industries don't follow Metric system? Rodney 1/8/03

Re: Why American Industries don't follow Metric system? ibrahimhc@vibratek.com.tr 1/10/03

Re: Why American Industries don't follow Metric system? Al 1/7/03

Re: Why American Industries don't follow Metric system? 1/7/03

Re: Why American Industries don't follow Metric system? Dave Gallagher, www.reliabilitydirect.com 12/30/02

Re: Why American Industries don't follow Metric system? Shawn 12/29/02

Re: Why American Industries don't follow Metric system? 12/29/02

Re: Why American Industries don't follow Metric system? Shawn 12/30/02

Re: Why American Industries don't follow Metric system? Arne 12/31/02

Metric system "can of worms" opened. Arne 12/28/02

Re: Metric system "can of worms" opened. ibrahimhc@vibratek.com.tr 1/8/03

FFT training software subramanian 12/27/02

Re: FFT training software Mike Barnett 12/27/02

Re: FFT training software E Murphy 12/27/02

Re: FFT training software G. d'Entremont 12/27/02

Re: FFT training software ibrahimhc@vibratek.com.tr 12/27/02

Small permanent magnet DC motor Jason Chen 12/26/02

Ball Screw Repair? jake 12/26/02

Re: Ball Screw Repair? 6/15/04

Re: Ball Screw Repair? William Yearout 5/31/03

Re: Ball Screw Repair? Max Roeder 1/7/03

AC MOTOR VIBRATION LEE 12/26/02

Re: AC MOTOR VIBRATION Arne 12/26/02

300Hz ibrahimhc@vibratek.com.tr 12/26/02

Re: 300Hz Petri 1/22/03

Re: 300Hz Arne 12/26/02

VIBRATION ON GAS TURBINE hafiz_tariq@yahoo.com 12/24/02

DC MOTOR (15X VIBATION ) lee 12/20/02

Re: DC MOTOR (15X VIBATION ) Ing. J. Rodríguez 1/2/03

Re: DC MOTOR (15X VIBATION ) Arne 12/20/02

Motor Current Problem Mokhtar Mohd Tahir 12/20/02

Re: Motor Current Problem sanjeev kumar ( sanjee93@yahoo.co.in ) 12/22/02

Motor Current 12/20/02

High Vibration Problem in a Screw Compressor Mahalingam 12/20/02

Re: High Vibration Problem in a Screw Compressor Prakash Bhatt 5/15/04

Re: High Vibration Problem in a Screw Compressor sanjeev kumar 12/22/02

Re: High Vibration Problem in a Screw Compressor MachineryWatch 12/20/02

Re: High Vibration Problem in a Screw Compressor Mahalingam 12/22/02

1.5x and 5.5x Line Frequency ??? URGENT!!!!! Henk de Swardt 12/18/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! jason_chen@jaeger.com.tw 12/18/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! Henk de Swardt 12/18/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! Pavel Preklasa 12/18/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! Henk de Swardt 12/18/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! Pavel Preklasa 12/19/02

Re: 1.5x and 5.5x Line Frequency ??? URGENT!!!!! info@beizein.nl 2/14/03

Cooper Joy Compressor High 3XRPM sy_kwon 12/11/02

Re: Cooper Joy Compressor High 3XRPM M. Barnett 12/12/02

Re: Cooper Joy Compressor High 3XRPM sy_kwon 12/13/02

Re: Cooper Joy Compressor High 3XRPM bidwai@vsnl.net 8/10/04

A good Motor Analysis resource? LPL 12/10/02

Re: A good Motor Analysis resource? Keith 12/17/02

Re: A good Motor Analysis resource? Arne 12/14/02

Re: A good Motor Analysis resource? LPL 12/18/02

Can anyone tell me what are the possible sources of 3XRPM? jagaloos@yahoo.com 12/10/02

Re: Can anyone tell me what are the possible sources of 3XRPM? jbryant@kcp.com 1/10/03

Re: Can anyone tell me what are the possible sources of 3XRPM? MachineryWatch 12/10/02

resonant frequ of water mike 12/7/02

Re: resonant frequ of water Tom Irvine, tomirvine@aol.com 12/9/02

Re: resonant frequ of water Sam Toucan 4/19/04

Re: resonant frequ of water ibrahimhc@vibratek.com.tr 12/8/02

Re: resonant frequ of water jav20001@hotmail.com 2/2/04

vibrations and structural damage duxbury@centurytel.net 12/5/02

Re: vibrations and structural damage w.schellingerhout@technofysica.nl 12/11/02

Re: vibrations and structural damage ibrahimhc@vibratek.com.tr 12/8/02

Re: vibrations and structural damage Tom Irvine, tomirvine@aol.com 12/6/02

Vibration table theory martin.dahlberg@mydata.se 12/5/02

Re: Vibration table theory Arne 12/14/02

sinusoidal on random vibration background dho@spectrumct.com 12/4/02

Re: sinusoidal on random vibration background Tom Irvine, tomirvine@aol.com 12/4/02

Re: sinusoidal on random vibration background david_t_ho@yahoo.com 12/5/02

Re: sinusoidal on random vibration background Tom Irvine 12/5/02

Re: sinusoidal on random vibration background dho@spectrumct.com 12/6/02

Orbit Analysis T. Alex 12/4/02

Re: Orbit Analysis joko, joko_sw2000@yahoo.com 12/7/02

Re: Orbit Analysis Dave G. www.reliabilitydirect.com 12/4/02

RBMware Datebase migration STLF 11/30/02

Re: RBMware Datebase migration Arne 12/1/02

Re: RBMware Datebase migration Dave G. ww.reliabilitydirect.com 12/1/02

We are having a DI 220 FFT analyser. Can i get the Coast up data and Coast down data with the same FFT analyser? virupaksha2k@hotmail.com 11/29/02

Re: We are having a DI 220 FFT analyser. Can i get the Coast up d... David Miller (uk) 11/30/02

We are having a DI 220 FFT analyser. Can i get the Coast up data and Coast down data with the same FFT analyser? virupaksha2k@hotmail.com 11/29/02

Re: We are having a DI 220 FFT analyser. Can i get the Coast up d... SKM Rao 1/1/03

Seating & vibration in Toyota Landcruisers mcampbel@parks.vic.gov.au 11/27/02

Re: Seating & vibration in Toyota Landcruisers E Murphy 11/27/02

Re: Seating & vibration in Toyota Landcruisers 12/3/02

paper presented at St. Louis meeting some years ago Philip McIntosh 11/26/02

Re: paper presented at St. Louis meeting some years ago Dennis 11/27/02

Re: paper presented at St. Louis meeting some years ago Jesús Tacza 12/4/02

Re: paper presented at St. Louis meeting some years ago Arne 11/27/02

MTwin / more mheijd@technofysica.nl 11/26/02

Re: MTwin / more aladdin 12/2/02

CSI 2120 mheijd@xs4all.nl 11/26/02

Re: CSI 2120 Arne 11/26/02

Vibration equipment gkaelin@calpine.com 11/26/02

Re: Vibration equipment Dave G. www.reliabilitydirect.com 11/26/02

Atlas Copco GA45 Screw Compressor Tania Molina, Venezuela. E-mail: tania_molina@cantv.net 11/25/02

Re: Atlas Copco GA45 Screw Compressor nicola 1/1/03

Re: Atlas Copco GA45 Screw Compressor Arne 11/26/02

Re: Atlas Copco GA45 Screw Compressor mheijd@technofysica.nl 11/26/02

Atlas Copco GA45 Screw Compressor Tania Molina, Venezuela 11/25/02

Re: Atlas Copco GA45 Screw Compressor vipul bhavsar 5/14/03

Re: Atlas Copco GA45 Screw Compressor vipul bhavsar 5/14/03

Re: Atlas Copco GA45 Screw Compressor joko_sw2000@yahoo.com 12/7/02

SKG M800A monitor faults Val S 11/25/02

Re: SKG M800A monitor faults Dan Bradley 11/25/02

Re: SKG M800A monitor faults Shawn 11/25/02

"Negative" Criticals MELeader@Houston.RR.COM 11/23/02

Re: "Negative" Criticals Arne 11/24/02

Re: "Negative" Criticals MELeader@Houston.RR.COM 11/25/02

Re: "Negative" Criticals MELeader@Houston.RR.COM 11/23/02

Piper Aircraft Vibration phammond@lightforcetech.com 11/20/02

Re: Piper Aircraft Vibration MachineryWatch 11/21/02

Re: Piper Aircraft Vibration Pete Hammond 11/22/02

Re: Piper Aircraft Vibration MachineryWatch 11/26/02

Re: Piper Aircraft Vibration Pete Hammond 11/22/02

Vibrating membrane filtration system Josh Miller 11/20/02

Broken Shaft Keith 11/20/02

Re: Broken Shaft 5/4/04

Re: Broken Shaft 11/23/02

Re: Broken Shaft J-Marc 11/21/02

Re: Broken Shaft Steve 11/21/02

Re: Broken Shaft jazzhome@hotmail.com 11/21/02

Re: Broken Shaft Arne 11/24/02

Re: Broken Shaft Jim P 11/20/02

Re: Broken Shaft Sasaki 11/20/02

Frequency Analysis Revised JT 11/20/02

Re: Frequency Analysis Revised Ron Hartlen 11/21/02

I.C. Engine Nasir Naqvi 11/19/02

Re: I.C. Engine mheijd@technofysica.nl 11/26/02

Frequency Analysis JT 11/19/02

Re: Frequency Analysis Ron Hartlen 11/19/02

Siesmic Vibration Site Survey Marc Brower 11/18/02

Re: Siesmic Vibration Site Survey Habit4Men 1/14/03

Re: Siesmic Vibration Site Survey Arne 11/23/02

Re: Siesmic Vibration Site Survey ibrahimhc@vibratek.com.tr 11/19/02

Re: Siesmic Vibration Site Survey Tom Irvine, tomirvine@aol.com 11/18/02

Re: Siesmic Vibration Site Survey Shawn 11/18/02

Music Vibration Kenneth Bass 11/16/02

Re: Music Vibration Charlie Hart 11/18/02

Loud Music Sylvia 12/20/04

Re: Music Vibration Alan Friedman 11/18/02

Re: Music Vibration Steve schultheis 11/18/02

Re: Music Vibration Jay Davis 11/18/02

Re: Music Vibration Steve Schultheis 11/19/02

Shock Pulse Analysis? Bill Mennuti 11/15/02

Re: Shock Pulse Analysis? Orane 7/24/03

Re: Shock Pulse Analysis? 11/15/02

Re: Shock Pulse Analysis? Dave G. www.reliabilitydirect.com 11/15/02

Brg fluting from non-electrical sources? Tony Wofford 11/13/02

Re: Brg fluting from non-electrical sources? Dave 6/18/03

Re: Brg fluting from non-electrical sources? MEMURPHY@TVA.GOV 1/7/03

Re: Brg fluting from non-electrical sources? Dostie 12/6/02

Re: Brg fluting from non-electrical sources? Bim 11/14/02

Aura Shakers/Active Vibration-Noise Cancellation Bill Houlehan/ O'Shea, Ltd 11/12/02

MAGNETIC CENTER BORRGB1@BP.COM 11/12/02

Re: MAGNETIC CENTER Dostie 12/6/02

Re: MAGNETIC CENTER 8/17/03

Turbine Rotor Deformation Neil 11/12/02

Re: Turbine Rotor Deformation 12/14/04

Re: Turbine Rotor Deformation Arne 11/15/02

Re: Turbine Rotor Deformation Neil 11/21/02

Vibration of a Fan casing b kote 11/12/02

Designing Ceramic Tiles with Vibration Peter Collier 11/12/02

Energy Savings from Precision Fan Balancing Gary Burditt - CAMI Automotive plant 11/11/02

Torsional Vibrations Book ram_sreeram@hotmail.com 11/11/02

Re: Torsional Vibrations Book Alex J 11/11/02

Torsional Vibrations Book Ram 11/11/02

Re: Torsional Vibrations Book MELeader@Houston.RR.COM 11/23/02

Re: Torsional Vibrations Book ibrahimhc@vibratek.com.tr 11/12/02

PRISM 4 Software Manu Chandra 11/10/02

Re: PRISM 4 Software 8/21/04

Re: PRISM 4 Software Shawn B 11/21/02

Re: PRISM 4 Software Dan Bradley 11/14/02

Re: PRISM 4 Software Dave G. www.reliabilitydirect.com 11/11/02

Re: PRISM 4 Software Shawn 11/11/02

Re: PRISM 4 Software BOTTGB1@BP.COM 11/12/02

Re: PRISM 4 Software Shawn 11/13/02

FTF in 2 year old 20 HP Motor Chad 11/8/02

Re: FTF in 2 year old 20 HP Motor Dostie 12/6/02

Re: FTF in 2 year old 20 HP Motor Tony 11/8/02

Re: FTF in 2 year old 20 HP Motor Chad 11/21/02

Re: FTF in 2 year old 20 HP Motor Tony 11/22/02

Re: FTF in 2 year old 20 HP Motor Chad 3/27/03

Re: FTF in 2 year old 20 HP Motor Chad 11/21/02

Re: FTF in 2 year old 20 HP Motor andy 11/26/02

The "New Inertial Theory of Rotor Dynamics" is published for the first time. A.Zhivotov. a-zhivotov@ukr.net 11/7/02

Re: The "New Inertial Theory of Rotor Dynamics" is published for ... E Murphy 11/13/02

Decibels to m/s/s paul.j.rooney@ntlworld.com 11/6/02

Re: Decibels to m/s/s Arne 11/6/02

Re: Decibels to m/s/s Paul Rooney 11/7/02

Re: Decibels to m/s/s Arne 11/7/02

Dynamic balance of >2000 rpm machines M Perkins 11/5/02

Re: Dynamic balance of >2000 rpm machines Arne 11/5/02

boiler feed pump ashri seman 11/4/02

Re: boiler feed pump Neven 11/12/02

Re: boiler feed pump sanjeev kumar 11/10/02

Re: boiler feed pump Arne 11/5/02

Boiler Draft Fan vibration problem .... JazzHome@yahoo.com.hk 11/4/02

Re: Boiler Draft Fan vibration problem .... mehdi7212004@yahoo.com 3/22/04

impeller balancing reg 11/2/02

Re: impeller balancing sanjeev kumar 11/3/02

Re: impeller balancing Arne 11/3/02

Re: impeller balancing Arne 11/2/02

Motor - Cooler Fan Nasir Naqvi 10/31/02

Re: Motor - Cooler Fan Arne 11/2/02

Re: Motor - Cooler Fan Steve 11/1/02

Re: Motor - Cooler Fan lxchen@actog.com 10/31/02

A "negative" critical speed? Tony 10/31/02

Re: A "negative" critical speed? Wiriton Silva de Matos 11/1/02

Re: A "negative" critical speed? Arne 11/2/02

Re: A "negative" critical speed? Tony 11/8/02

Re: A "negative" critical speed? 11/1/02

Re: A "negative" critical speed? Arne 10/31/02

Re: A "negative" critical speed? Steve Schultheis 10/31/02

Acceptance Standards Dennis Kiene 10/31/02

Re: Acceptance Standards Arne 11/1/02

Re: Acceptance Standards Arne 11/2/02

Static equipment vibration rozaimy 10/30/02

Re: Static equipment vibration steve 10/30/02

High Vibration on inboard generator bsugiharta@telkom.net 10/30/02

Re: High Vibration on inboard generator viblee@kps.co.kr 10/30/02

Re: High Vibration on inboard generator Alex J 10/30/02

Expert program texcalusa@yahoo.com 10/29/02

Re: Expert program Mike B. 11/1/02

Re: Expert program c_v_manohar@rediffmail.com 11/3/02

Vibration spectra J. Francis 10/29/02

Re: Vibration spectra jameswhanna@hotmail.com 4/22/03

Re: Vibration spectra warrenn@USAonline.net 11/4/02

Re: Vibration spectra Steve 10/30/02

Re: Vibration spectra Ron Hartlen 10/29/02

Bearing Frequency ??? 10/29/02

Re: Bearing Frequency ??? ibrahimhc@vibratek.com.tr 11/12/02

Re: Bearing Frequency ??? Mike C 10/29/02

Reliability Sanjeev kumar 10/28/02

Re: Reliability Steve 10/31/02

Re: Reliability Sanjeev kumar 11/3/02

Turbine Alternator in situ Balancing Shalabh K Gupta 10/25/02

Re: Turbine Alternator in situ Balancing IIPM INDIA 5/21/03

Re: Turbine Alternator in situ Balancing Madhusudan.N 4/11/03

Re: Turbine Alternator in situ Balancing ramadurai balancers@vsnl.com 3/1/03

Re: Turbine Alternator in situ Balancing Alex J 10/28/02

Re: Turbine Alternator in situ Balancing ahmeddokki@hotmail.com 10/27/02

Cyclic Analysis Carlos J. 10/24/02

Winder Unbalance Mike C. 10/24/02

Re: Winder Unbalance Arne 10/24/02

Re: Winder Unbalance Mike C. 10/25/02

Re: Winder Unbalance Arne 10/26/02

Re: Winder Unbalance Mike C. 10/28/02

Re: Winder Unbalance Arne 10/26/02

vibrations from a spa pump motor ataurozzi@interhop.net 10/24/02

Re: vibrations from a spa pump motor Steve Schultheis 10/26/02

vibrations from a spa pump motor ataurozzi@interhop.net 10/24/02

What is normal phase reading for good bearing house JazzHome@yahoo.com.hk 10/24/02

Re: What is normal phase reading for good bearing house viblee@kps.co.kr 10/26/02

Two plane balancing method or equation jazzhome@yahoo.com.hk 10/24/02

variation of vibration with bearing temperature sharma Devendra 10/24/02

Re: variation of vibration with bearing temperature ibrahimhc@vibratek.com.tr 10/29/02

Side bands of differential Speed around BPFO rajendra_a_zope@ril.com 10/23/02

Re: Side bands of differential Speed around BPFO electricpete 11/18/02

Re: Side bands of differential Speed around BPFO Arne 10/24/02

Re: Side bands of differential Speed around BPFO ibrahimhc@vibratek.com.tr 10/24/02

SKF MACHINE ANALYST BOTTGB1@BP.COM 10/23/02

Re: SKF MACHINE ANALYST c_v_manohar@rediffmail.com 11/3/02

Re: SKF MACHINE ANALYST 2/13/03

High Vibration Problem in a Boiler Draft Fan Mahalingam 10/23/02

Re: High Vibration Problem in a Boiler Draft Fan leo_cruz@dynegy.com 10/25/02

Re: High Vibration Problem in a Boiler Draft Fan Arne 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Arne 10/25/02

Re: High Vibration Problem in a Boiler Draft Fan E Murphy 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan jason_chen@jaeger.com.tw 10/23/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/23/02

Re: High Vibration Problem in a Boiler Draft Fan debashis_b123@rediffmail.com 10/28/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/28/02

Re: High Vibration Problem in a Boiler Draft Fan nvdynamics@vsnl.net 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Mahalingam 10/24/02

Re: High Vibration Problem in a Boiler Draft Fan Roy Carter 10/29/02

General Vibration Test John Gaudiuso 10/22/02

Re: General Vibration Test Arne 10/24/02

Re: General Vibration Test Tom Irvine, tomirvine@aol.com 10/23/02

MFS or BFS htibbs 10/22/02

Re: MFS or BFS Arne 10/24/02

Re: MFS or BFS Dave G. www.reliabilitydirect.com 10/22/02

Mtwin Aladdin 10/21/02

Re: Mtwin c_v_manohar@rediffmail.com 11/3/02

Re: Mtwin Petri Korhonen - CMAD 10/22/02

Re: Mtwin Andrew Crooks 10/23/02

Re: Mtwin used vibration 11/5/02

Testing Process AMC A 204-96 R.Roberts 10/21/02

ACMC A 204-96 R.Roberts 10/21/02

Vibration at Pump system Sven 10/19/02

Re: Vibration at Pump system Alex J 10/21/02

Re: Vibration at Pump system viblee@kps.co.kr 10/20/02

Re: Vibration at Pump system sanjeev kumar 10/20/02

Spectra scan test tool for frequency sweep excitor viblee@kps.co.kr 10/19/02

Re: Spectra scan test tool for frequency sweep excitor MachineryWatch 10/22/02

Re: Spectra scan test tool for frequency sweep excitor viblee@kps.co.kr 10/26/02

Centrifugal Pump - Vertically Mounted Nasir Naqvi 10/18/02

Re: Centrifugal Pump - Vertically Mounted Jim P 10/20/02

Re: Centrifugal Pump - Vertically Mounted E Murphy 10/19/02

Vibration equipment questions David A. Larkin 10/18/02

Re: Vibration equipment questions used vibration 11/5/02

Re: Vibration equipment questions E Murphy 10/19/02

Re: Vibration equipment questions David G. www.reliabilitydirect.com 10/19/02

Vibration Measures in Construction Diego Melchert at dmelchert@mitchell-engineering.com 10/17/02

Pump suction turbulence George Anglin 10/17/02

Re: Pump suction turbulence 4/12/04

Re: Pump suction turbulence Richard Burton (raburton@ra.rockwell.com) 10/18/02

Re: Pump suction turbulence Alex J 10/18/02

Re: Pump suction turbulence Alex J 10/17/02

Limitations about structural peak vibrations J. Rodriguez 10/17/02

Re: Limitations about structural peak vibrations Ron Hartlen 10/17/02

Re: Limitations about structural peak vibrations J.Rodriguez 10/17/02

Re: Limitations about structural peak vibrations Ron Hartlen 10/17/02

Re: Limitations about structural peak vibrations J.Rodriguez 10/18/02

wbrostow@amergenenergy.com Rollway bearing E6210B defect frrequencies 10/17/02

Re: wbrostow@amergenenergy.com E Murphy 10/19/02

GMF & its Harmonic hafiz_tariq@yahoo.com 10/15/02

Re: GMF & its Harmonic viblee@kps.co.kr 10/18/02

Re: GMF & its Harmonic MachineryWatch 10/17/02

Re: GMF & its Harmonic 10/21/02

Babbit pealing rmrichmond@aeraenergy.com 10/9/02

Re: Babbitt pealing MELeader@Houston.RR.COM 11/23/02

Re: Babbit pealing sanjeev kumar 10/15/02

Re: Babbit pealing Larry 10/11/02

Fluting Curt 10/9/02

Re: Fluting veera 10/11/02

Re: Fluting 10/15/02

Re: Fluting c_v_manohar@rediffmail.com 11/3/02

roots comp. Steve 10/9/02

Re: roots comp. Shawn 10/10/02

Steam Turbine Vibration Gary Bowler  10/8/02

Re: Steam Turbine Vibration Dave G.  www.stiweb.com 10/8/02

Contact noise of DC motor Jason Chen 10/7/02

Re: Contact noise of DC motor Richard Burton (raburton@ra.rockwell.com) 10/8/02

Article 3212 pragu26@rediffmail.com 10/7/02

Gear Boxs Larry Freeman 10/6/02

Re: Gear Boxs Thomas Frank 5/8/03

Re: Gear Boxs David Eason 10/9/02

Re: Gear Boxs Brian Halverson 5/25/04

Re: Gear Boxs Brian Halverson 2/24/04

Re: Gear Boxs Larry 10/8/02

Re: Gear Boxs Donald Nice, Jr. 10/7/02

Lobe Passing Frequency Steve 10/4/02

Re: Lobe Passing Frequency Richard Burton(raburton@ra.rockwell.com) 10/8/02

Re: Lobe Passing Frequency E Murphy 10/5/02

Re: Lobe Passing Frequency ibrahimhc@vibratek.com.tr 10/5/02

Re: Lobe Passing Frequency Steve 10/6/02

Re: Lobe Passing Frequency Alex J 10/5/02

Re: Lobe Passing Frequency Charlie cs2mh@msn.com 10/4/02

Automotive Alternator Vibration aaskhedkar@pune.josts.com 10/4/02

Re: Automotive Alternator Vibration duane.j.buening@delphi.com 1/31/03

Re: Automotive Alternator Vibration nvdynamics@vsnl.net 10/24/02

1R Sidebands Around Stator slot Jim P 10/3/02

Re: 1R Sidebands Around Stator slot E Murphy 10/5/02

Re: 1R Sidebands Around Stator slot Charlie cs2mh@msn.com 10/3/02

Float at both ends Dino 10/3/02

High Vibrations in Sundyne Pump Gearbox - Model 331 rajendra_a_zope@ril.com 10/1/02

Re: High Vibrations in Sundyne Pump Gearbox - Model 331 Steve 10/4/02

Re: High Vibrations in Sundyne Pump Gearbox - Model 331  10/2/02

Re: High Vibrations in Sundyne Pump Gearbox - Model 331 B.Dunne 10/2/02

Re: High Vibrations in Sundyne Pump Gearbox - Model 331 Schultheis 10/2/02

Re: High Vibrations in Sundyne Pump Gearbox - Model 331 Don 3/6/03

SRAM card for DI2200 jugo.ilic@csiro.au 10/1/02

Re: SRAM card for DI2200  10/2/02

Re: SRAM card for DI2200 jugo.ilic@csiro.au 10/3/02

Re: SRAM card for DI2200 jugo ilic 10/4/02

Re: SRAM card for DI2200  10/4/02

FD Fan axial vibration at 1X Terry 9/30/02

Re: FD Fan axial vibration at 1X J. Thomas 10/18/02

Re: FD Fan axial vibration at 1X sanjeev kumar 10/15/02

Re: FD Fan axial vibration at 1X George d'Entremont 10/1/02

Stray shaft current mnmemon@yahoo.com 9/29/02

Re: Stray shaft current Tom Sohre 6/24/03

Re: Stray shaft current Arne.Lindholm 9/30/02

Re: Stray shaft current Roycer 12/31/02

Gear Box Analysis sajeevk@hotmail.com 9/28/02

Re: Gear Box Analysis Richard Burton (raburton@ra.rockwell.com) 9/30/02

Re: Gear Box Analysis sajeevk@hotmail.com 10/2/02

Broken fan shaft Craig Van Wyke 9/27/02

Re: Broken fan shaft ibrahimhc@vibratek.com.tr 9/28/02

Re: Broken fan shaft Sid Booksh (mts.ak@att.net) 9/27/02

Re: Broken fan shaft Shawn 9/30/02

Re: Broken fan shaft MachineryWatch 9/27/02

Paper Calendar Roll Nip Frequency 4 times running speed R Coan 9/24/02

Re: Paper Calendar Roll Nip Frequency 4 times running speed Mike C. 9/24/02

Re: Paper Calendar Roll Nip Frequency 4 times running speed Don L 9/27/02

Re: Paper Calendar Roll Nip Frequency 4 times running speed MachineryWatch 9/24/02

vibration from a servo-motor Fakher (fakher.attt@gnet.tn) 9/22/02

Re: vibration from a servo-motor Alex J 9/27/02

Data collectors vibedude 9/19/02

Re: Data collectors C. Hart 9/24/02

Re: Data collectors tony.wofford@potlatchcorp.com 9/20/02

Entek IRD dataPAC1500 GD 9/19/02

Re: Entek IRD dataPAC1500 Kachusha 12/2/04

Re: Entek IRD dataPAC1500 3/29/03

Re: Entek IRD dataPAC1500 Juan Carlos Gonzalez 3/29/03

Re: Entek IRD dataPAC1500 Michel Tremblay 2/19/03

Re: Entek IRD dataPAC1500 vmatveev@canatal.com 8/12/04

Re: Entek IRD dataPAC1500 vmatveev@canatal.com 7/27/04

Steam turbine Luis Velásquez 9/18/02

Re: Steam turbine Alex J 9/20/02

Re: Steam turbine Steve Schultheis 9/20/02

Re: Steam turbine Terry 9/20/02

Re: Steam turbine Luis Velásquez 9/23/02

Re: Steam turbine Sasaki 9/19/02

Re: Steam turbine Steve 9/19/02

Re: Steam turbine Ron Stiemsma 9/26/02

Re: Steam turbine Luis Velásquez 9/19/02

ROTOR DYNAMICS Alexandr Zhivotov  a-zhivotov@ukr.net 9/18/02

Closely spaced natural frequecies Paul 9/18/02

Re: Closely spaced natural frequecies ivibr8@yahoo.com 9/18/02

Re: Closely spaced natural frequecies  9/19/02

Re: Closely spaced natural frequecies Paul 9/19/02

Re: Closely spaced natural frequecies w_f_strong@msn.com 9/19/02

Re: Closely spaced natural frequecies Sid Booksh 9/18/02

Vibration from a servo-motor Fakher Chaari (fakher.attt@gnet.tn) 9/18/02

4 pole motors ,electrical problem andrew.charlett@health.wa.gov.au 9/18/02

Re: 4 pole motors ,electrical problem tony.wofford@potlatchcorp.com 9/18/02

Re: 4 pole motors ,electrical problem electricpete 9/19/02

Re: 4 pole motors ,electrical problem Steve 9/18/02

Dynamic torsional modulus of elasticity Jugo Ilic (jugo.ilic@csiro.au) 9/17/02

Re: Dynamic torsional modulus of elasticity ibrahimhc@vibratek.com.tr 9/17/02

Re: Dynamic torsional modulus of elasticity WCF 9/18/02

Re: Dynamic torsional modulus of elasticity ibrahimhc@vibratek.com.tr 9/19/02

Re: Dynamic torsional modulus of elasticity jugo ilic 9/18/02

Re: Dynamic torsional modulus of elasticity ibrahimhc@vibratek.com.tr 9/19/02

Re: Dynamic torsional modulus of elasticity jugo.ilic@csiro.au 9/21/02

Memory card for DI2200 Jugo Ilic 9/17/02

centrifugal pump vibration 7stage. gd. 9/14/02

Re: centrifugal pump vibration 7stage. Gd 9/19/02

Re: centrifugal pump vibration 7stage. George d'Entremont 9/18/02

Re: centrifugal pump vibration 7stage. Walt Strong 9/18/02

Re: centrifugal pump vibration 7stage. Steve 9/17/02

Re: centrifugal pump vibration 7stage. gd 9/18/02

Re: centrifugal pump vibration 7stage. Steve 9/18/02

Engine Driven Pump naqvin@bp.com 9/13/02

Re: Engine Driven Pump Walt Strong 9/13/02

Piping Vibration Nasir Naqvi 9/12/02

Re: Piping Vibration 5/24/03

Re: Piping Vibration Steve 9/17/02

Re: Piping Vibration Sid Booksh 9/13/02

Piping Vibration Nasir Naqvi 9/12/02

Re: Piping Vibration 12/14/04

Re: Piping Vibration 12/14/04

Re: Piping Vibration 12/14/04

Re: Piping Vibration 12/14/04

Re: Piping Vibration Ron Hartlen 9/13/02

Frick Screw Compressor Vbration analysis rlavalley@houston .rr.com 9/11/02

Re: Frick Screw Compressor Vbration analysis Walt Strong 9/13/02

Re: Frick Screw Compressor Vbration analysis Mike B. 9/12/02

Re: Frick Screw Compressor Vbration analysis Arne.Lindholm 9/15/02

Re: Frick Screw Compressor Vbration analysis jameswhanna@hotmail.com 11/6/02

Re: Frick Screw Compressor Vbration analysis Tallguy 2/10/03

Gimbal Resonance tdoughull@hotmail.com 9/10/02

Re: Gimbal Resonance jason_chen@jaeger.com.tw 9/16/02

Re: Gimbal Resonance Walt Strong 9/13/02

Centrifugal fan "rotating stall" tony.wofford@potlatchcorp.com 9/10/02

Re: Centrifugal fan "rotating stall" w_f_strong@msn.com 9/13/02

Re: Centrifugal fan "rotating stall" Steve 9/11/02

Used Dataline Peggy T 9/9/02

Re: Used Dataline tcurl@enertex.com 8/7/04

Baseplates, Monuments, Specifications, and Reliability Chad C 9/5/02

Levels of Vibration PT 9/4/02

Re: Levels of Vibration Arne.Lindholm 9/7/02

Re: Levels of Vibration Sid B. 9/4/02

ISO Balance Grade Calculations C. Dostie 9/4/02

Re: ISO Balance Grade Calculations tweiss48@excite.com 1/16/03

Re: ISO Balance Grade Calculations Terry Tomlinson 9/5/02

Re: ISO Balance Grade Calculations Ali Al-Shurafa 9/30/02

Re: ISO Balance Grade Calculations Sid Booksh 9/4/02

Vertical Pump Lateral Vibration Analysis Nirmal 9/3/02

Re: Vertical Pump Lateral Vibration Analysis Arne.Lindholm 9/7/02

Re: Vertical Pump Lateral Vibration Analysis Alfa-Tranzit Co.Ltd 9/5/02

VFD Analysis/Torsional Forced Response Analysis Software Nirmal 9/3/02

Re: VFD Analysis/Torsional Forced Response Analysis Software rvarty@betamachinery.com 1/8/03

Re: VFD Analysis/Torsional Forced Response Analysis Software MELeader@Houston.RR.COM 11/23/02

Robotic System Circuit Board Failures Pat.D.Farquharson@kcc.com 9/3/02

Fault Detection in Small, High-Speed (26,700 rpm) Bearings Robert X. Perez 8/28/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings C. Dostie 9/19/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings Alex J 8/30/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings Robert X. Perez 9/3/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings Alex J 9/9/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings Skip Hartman 8/28/02

Re: Fault Detection in Small, High-Speed (26,700 rpm) Bearings Steve 8/28/02

alignment specs vibo man 8/27/02

Re: alignment specs C. Dostie 9/4/02

Re: alignment specs Arne.Lindholm 9/7/02

Re: alignment specs Charlie cs2mh@msn.com 8/28/02

Re: alignment specs Arne.Lindholm 8/27/02

David Miller Tim King 8/27/02

Amplitude measurement at the horn of the ultrasonic plastic welding S.Chalinee 8/26/02

Re: Amplitude measurement at the horn of the ultrasonic plastic w... bhavesh patel from sheetal enterprises 7/19/03

Re: Amplitude measurement at the horn of the ultrasonic plastic w... Arturo 10/1/02

vibration analysis das712 8/26/02

Re: vibration analysis Arturo 10/1/02

Re: vibration analysis Wyndell 8/27/02

Re: vibration analysis Arne.Lindholm 8/26/02

Re: vibration analysis das712 8/26/02

Re: vibration analysis Skip Hartman 8/26/02

PRESENTATION ON VIBRATION ANALYSIS ws007au@yahoo.com 8/25/02

Re: PRESENTATION ON VIBRATION ANALYSIS muhammadamir74@yahoo.com 4/19/04

Re: PRESENTATION ON VIBRATION ANALYSIS yamiri@msn.com 3/18/03

Re: PRESENTATION ON VIBRATION ANALYSIS Arne.Lindholm 8/25/02

Re: PRESENTATION ON VIBRATION ANALYSIS ibrahimhc@vibratek.com.tr 8/25/02

Re: PRESENTATION ON VIBRATION ANALYSIS Arne.Lindholm 8/25/02

Re: PRESENTATION ON VIBRATION ANALYSIS ws007au@yahoo.com 8/27/02

Re: PRESENTATION ON VIBRATION ANALYSIS ws007au@hotmail.com 8/27/02

Why make a rigid body flexible? sl_abh@yahoo.com 8/22/02

Re: Why make a rigid body flexible? Skip Hartman 8/27/02

Re: Why make a rigid body flexible? Arne.Lindholm 8/22/02

Chillers  8/22/02

Re: Chillers E Murphy 8/24/02

Re: Chillers Arne.Lindholm 8/22/02

Re: Chillers mhsrai@aol.com 8/23/02

Thermography Sanjeev kumar 8/22/02

Re: Thermography sanjeev kumar 8/27/02

Re: Thermography Dave G, www.reliabilitydirect.com 8/23/02

Re: Thermography Arne.Lindholm 8/22/02

Re: Thermography  8/27/02

Re: Thermography Steve 8/22/02

Re: Thermography  8/22/02

Re: Thermography Arne.Lindholm 8/22/02

Re: Put off by anonymous authors ibrahimhc@vibratek.com.tr 8/25/02

Tortional coupling mode 123Hz with a 2 pole, three phase, 60 Hz generator smassicotte@sympatico.ca 8/21/02

Re: Tortional coupling mode 123Hz with a 2 pole, three phase, 60 ... arie mol, nl 6/30/04

Re: Tortional coupling mode 123Hz with a 2 pole, three phase, 60 ... ibrahimhc@vibratek.com.tr 8/25/02

Re: Tortional coupling mode 123Hz with a 2 pole, three phase,... electricpete 9/5/02

Re: Tortional coupling mode 123Hz with a 2 pole, three phase, 60 ... Sid Booksh 8/21/02

Motor Spec. convibinc@aol.com 8/19/02

Re: Motor Spec. brian.biby@ispat.com 9/30/02

Re: Motor Spec. Steve 8/21/02

Re: Motor Spec. Shawn 8/20/02

vertical motor with "soft  foot" richkeller 8/13/02

Re: vertical motor with "soft foot" rrebryna@lawrcon.com 9/16/04

Re: vertical motor with "soft  foot" viblee@kps.co.kr 8/17/02

Re: vertical motor with "soft  foot" practical 8/17/02

Re: vertical motor with "soft  foot" ibrahimhc@vibratek.com.tr 8/16/02

Re: vertical motor with "soft  foot" Arne.Lindholm 8/14/02

Re: vertical motor with "soft  foot" Walt Strong 8/14/02

vibration analyser procurement and calibration. srnathan@igcar.ernet.in 8/13/02

Re: vibration analyser procurement and calibration. abalasubramanian@eandi.biz 6/5/04

Re: vibration analyser procurement and calibration. Dave G 8/14/02

Re: vibration analyser procurement and calibration. Arne.Lindholm 8/17/02

Re: vibration analyser procurement and calibration. vibedude 9/6/02

Re: vibration analyser procurement and calibration. Dave G. 8/18/02

Re: vibration analyser procurement and calibration. David Miller (uk) 8/13/02

Need information on Vibration Analysis rjr_611@rediffmail.com 8/12/02

Re: Need information on Vibration Analysis Arne.Lindholm 8/17/02

Re: Need information on Vibration Analysis ibrahimhc@vibratek.com.tr 8/16/02

Re: Need information on Vibration Analysis Walt Strong 8/14/02

analyser servicing srnathan&igcar.ernet.in 8/12/02

Re: analyser servicing Dave G. 8/18/02

Does anyone can help me to find information of phases a_meneses_h@hotmail.com 8/9/02

Re: Does anyone can help me to find information of phases almryed@yahoo.com 8/18/02

Re: Does anyone can help me to find information of phases kgsubramanian@hotmail.com 12/30/02

Chatter Hardeep 8/9/02

Re: Chatter George d'Entremont 9/11/02

Re: Chatter ibrahimhc@vibratek.com.tr 8/10/02

Ultrasonic into CSI 2120? Ed Morden 8/8/02

Re: Ultrasonic into CSI 2120? Skip Hartman 8/27/02

Re: Ultrasonic into CSI 2120? Walt Strong 8/14/02

Phase readings George Anglin 8/5/02

Re: Phase readings viblee@kps.co.kr 8/10/02

Re: Phase readings Mike C. 8/5/02

Ohase readings George Anglin 8/5/02

online monitoring mallik 8/4/02

Re: online monitoring A 8/18/02

Re: online monitoring Walt Strong 8/14/02

Re: online monitoring CB 8/13/02

Safe disposal of NiCad Batteries. Nasir Naqvi 8/2/02

Re: Safe disposal of NiCad Batteries. Arne.Lindholm 8/17/02

Variable Frequency Drives and Vibration Robert.Sutton@gm.com 7/30/02

Re: Variable Frequency Drives and Vibration Mick Flanigan 8/19/02

Primary Air fan problems benderb@firstenergycorp.com 7/30/02

Re: Primary Air fan problems Walt Strong 8/14/02

Re: Primary Air fan problems viblee@kps.co.kr 8/10/02

Re: Primary Air fan problems Alex J 8/6/02

Re: Primary Air fan problems Alex J 8/5/02

Re: Primary Air fan problems  8/6/02

Re: Primary Air fan problems jason_chen@jaeger.com.tw 7/31/02

Synchronous Motors Keith 7/30/02

Re: Synchronous Motors electricpete 7/30/02

Reliability Conferences Gary Einarson 7/25/02

Random Vibration Response - Maximum Sigma Measured? hfjohnso@aol.com 7/24/02

Re: Random Vibration Response - Maximum Sigma Measured? aa 8/1/02

Can 2x in vaneaxial fan be caused by turbulance? uriah@bbdynamo.com 7/22/02

Re: Can 2x in vaneaxial fan be caused by turbulance? Ed Morden 8/8/02

Re: Can 2x in vaneaxial fan be caused by turbulance? jerardo 7/27/02

Dynamic Balancing vr_gajjar@yahoo.co.in 7/17/02

Re: Dynamic Balancing Skip Hartman 8/2/02

HVAC Course mpc1218@juno.com 7/17/02

Re: HVAC Course DasString@aol.com 9/23/02

Re: HVAC Course SGARZA@RIMKUS.COM 8/13/02

Justifing the Cost of CBM afphillips@cmsenergy.com 7/17/02

Re: Justifing the Cost of CBM LEROY PEIRSON   l.b.peirson@egl.net 7/18/02

Mill Eirich DEV 29 J.Pasamar@fagorederlan.es 7/17/02

Whole Body Vibration Rod Ovitt 7/16/02

Safety Precautions During Collection of Vibration Data Nasir Naqvi 7/13/02

Re: Safety Precautions During Collection of Vibration Data Fernando 7/27/02

Re: Safety Precautions During Collection of Vibration Data Ali Al-Shurafa 9/30/02

Re: Safety Precautions During Collection of Vibration Data E Murphy 7/24/02

Re: Safety Precautions During Collection of Vibration Data Bim Becker 7/24/02

Bently-Nevada Snapshot jweb 7/11/02

Re: Bently-Nevada Snapshot Jamal Qassim 3/20/04

Re: Bently-Nevada Snapshot Pete Marino 5/28/04

Re: Bently-Nevada Snapshot Terry 7/12/02

Re: Bently-Nevada Snapshot robert_kaplan@fpl.com 7/12/02

Re: Bently-Nevada Snapshot Schultheis 7/12/02

Re: Bently-Nevada Snapshot jweb 7/15/02

Re: Bently-Nevada Snapshot Arne Lindholm 7/18/02

Re: Bently-Nevada Snapshot umesh 10/31/02

Re: Bently-Nevada Snapshot William C. Foiles 7/22/02

Re: Bently-Nevada Snapshot Arne.Lindholm 7/22/02

Re: Bently-Nevada Snapshot  7/22/02

Re: Bently-Nevada Snapshot  7/21/02

Re: Bently-Nevada Snapshot Arne.Lindholm 7/21/02

Impact Testing between top components  7/10/02

Re: Impact Testing between top components byron.martin@mecheng.adelaide.edu.au 7/22/02

Alternative High Frequency Vibration System Amanda Butcher 7/10/02

Is anyone using PeakVue analysis on slow speed equipment? bcarey@purina.com 7/10/02

Re: Is anyone using PeakVue analysis on slow speed equipment? Jim Crowe 8/20/02

Re: Is anyone using PeakVue analysis on slow speed equipment? C. Dostie 7/10/02

Re: Is anyone using PeakVue analysis on slow speed equipment? David Eason 7/10/02

Re: Is anyone using PeakVue analysis on slow speed equipment? bcarey@purina.com 7/10/02

Re: Is anyone using PeakVue analysis on slow speed equipment? David Eason 7/11/02

Re: Is anyone using PeakVue analysis on slow speed equipment? bcarey@purina.com 7/12/02

Re: Is anyone using PeakVue analysis on slow speed equipment? Alex J 7/10/02

Electrostatic On Turbomachinery Shaft Mokhtar Mohd Tahir 7/9/02

Re: Electrostatic On Turbomachinery Shaft George Johnston 7/16/02

Re: Electrostatic On Turbomachinery Shaft Arne.Llindholm 7/9/02

Re: Electrostatic On Turbomachinery Shaft Alex J 7/9/02

Bevel Gear Vibration Giomby 7/7/02

Re: Bevel Gear Vibration E Murphy 7/8/02

Re: Bevel Gear Vibration  7/9/02

Re: Bevel Gear Vibration E Murphy 7/9/02

Vibration Analysis VRG 7/6/02

Re: Vibration Analysis Arne.Lindholm 7/6/02

Re: Vibration Analysis Sid Booksh 7/6/02

Vibration Analysis VRG 7/6/02

Vibration Analysis VRG 7/6/02

Outboard Bearing of Generator Nasir Naqvi 7/5/02

Re: Outboard Bearing of Generator ibrahimhc@vibratek.com.tr 7/6/02

Re: Outboard Bearing of Generator Nasir Naqvi 7/6/02

Vibration damping needed on a steel hot rolling mill ibrahimhc@vibratek.com.tr 7/5/02

The turbulence of lubricant, can a seal may produce it? ameneses 7/4/02

Re: The turbulence of lubricant, can a seal may produce it? Arne.Lindholm 7/5/02

What practical aspects are to be kept in mind while balancing a steam turbine rotor above first critical VRG 7/4/02

Re: What practical aspects are to be kept in mind while balancing... Arne.Lindholm 7/4/02

What is the criteria for selecting the No. of lines in a frequency spectrum i.e. when to select 100, 400, 800 etc line spectrum for vib. analysis VRG 7/4/02

Re: What is the criteria for selecting the No. of lines in a freq... byron.martin@mecheng.adelaide.edu.au 7/22/02

Re: What is the criteria for selecting the No. of lines in a freq... Gary@BainbridgeTechnical.com 7/5/02

Re: What is the criteria for selecting the No. of lines in a freq... Arne.Lindholm 7/4/02

Lime slurry pump temperatures benderb@firstenergycorp.com 7/2/02

Re: Lime slurry pump temperatures Alex J 7/3/02

Vibration Analyzer, comparison Mike Cox 7/2/02

Re: Vibration Analyzer, comparison byron.martin@mecheng.adelaide.edu.au 7/22/02

Re: Vibration Analyzer, comparison Carlos A. Hein 7/12/02

Re: Vibration Analyzer, comparison Schultheis 7/3/02

Re: Vibration Analyzer, comparison Sid Booksh 7/2/02

Re: Vibration Analyzer, comparison Arne.Lindholm 7/2/02

Re: Vibration Analyzer, comparison Dave G. www.reliabilitydirect.com 7/2/02

Re: Vibration Analyzer, comparison  7/2/02

Re: Vibration Analyzer, comparison Skip Hartman 7/2/02

Vibrations at high speeds... What should I look for? Who can balance? Kevin 7/1/02

Re: Vibrations at high speeds... What should I look for? Who can ... Alex J 7/1/02

Re: Vibrations at high speeds... What should I look for? Who can ... Arne.Lindholm 7/1/02

location and orientation of radial shaft vibration probes. Girish Kamal 6/30/02

Re: location and orientation of radial shaft vibration probes. john.winterton@bently.com 7/11/02

Experience w/ Having to Balance 600 Mw Generator Field After Rewind Howard Hoffmann 6/27/02

Re: Experience w/ Having to Balance 600 Mw Generator Field After ... anonymous 4/23/04

Re: Experience w/ Having to Balance 600 Mw Generator Field After ...  6/27/02

Re: Experience w/ Having to Balance 600 Mw Generator Field Af... Howard Hoffmann 6/28/02

Re: Experience w/ Having to Balance 600 Mw Generator Field Af... Arne.Lindholm 6/28/02

Re: Experience w/ Having to Balance 600 Mw Generator Field After ... E Murphy 6/27/02

Re: Experience w/ Having to Balance 600 Mw Generator Field Af... Howard Hoffmann 6/28/02

Re: Experience w/ Having to Balance 600 Mw Generator Field Af... E Murphy 6/29/02

4x vertical vibration, recip compressor Steven Beville 6/26/02

Re: 4x vertical vibration, recip compressor ibrahimhc@vibratek.com.tr 6/30/02

Re: 4x vertical vibration, recip compressor Schultheis 6/27/02

VIBRATION IN VERTICAL PUMP (MULTI -STAGE) Eng. Ahmed Azmey 6/26/02

Re: VIBRATION IN VERTICAL PUMP (MULTI -STAGE) simon.fitton@sulzer.com 8/14/02

Re: VIBRATION IN VERTICAL PUMP (MULTI -STAGE) ibrahimhc@vibratek.com.tr 6/30/02

Re: VIBRATION IN VERTICAL PUMP (MULTI -STAGE) Alex J 6/27/02

VIBRATION IN VERTICAL PUMP (MULTI -STAGE) Eng. Ahmed Azmey 6/26/02

Vibration in Alky feed pump George Anglin  6/26/02

Re: Vibration in Alky feed pump Arne.Lindholm 6/26/02

Re: Vibration in Alky feed pump  6/26/02

Felt Vibrations C. Dostie 6/26/02

Re: Felt Vibrations C.Dostie 7/9/02

Re: Felt Vibrations Mike C. 7/2/02

Re: Felt Vibrations Arne.Lindholm 6/26/02

Re: Felt Vibrations Steve 6/26/02

Vibration Analyzer Mike Bain 6/25/02

Re: Vibration Analyzer mbain@hamilton.ca 7/10/04

How do you determine vibration alarm levels? conradd@firstenergycorp.com 6/25/02

Re: How do you determine vibration alarm levels? Gary@iLearnInteractive.com 6/26/02

Re: How do you determine vibration alarm levels? Ali Al-Shurafa 7/1/02

Re: How do you determine vibration alarm levels? amh 7/5/02

Re: How do you determine vibration alarm levels? Ali Al-Shurafa 5/16/03

Re: How do you determine vibration alarm levels? Ali Al-Shurafa 7/2/02

Re: How do you determine vibration alarm levels? ibrahimhc@vibratek.com.tr 6/26/02

Looking for online resources bcarey@purina.com 6/25/02

Re: Looking for online resources electricpete 6/29/02

Re: Looking for online resources Dave G - www.reliabilitydirect.com 6/26/02

I.D. fan vibration parameters benderb@firstenergycorp.com 6/25/02

Re: I.D. fan vibration parameters wandadogmeat@att.net 6/25/02

Re: I.D. fan vibration parameters  6/26/02

Re: I.D. fan vibration parameters ksimon@covad.net 7/30/02

Re: I.D. fan vibration parameters Alex J 6/25/02

Re: I.D. fan vibration parameters benderb 6/25/02

Re: I.D. fan vibration parameters Sasaki 6/25/02

Re: I.D. fan vibration parameters  6/25/02

Compaction of epoxy while dispensing gar.p.hoover@delphiauto.com 6/24/02

Re: Compaction of epoxy while dispensing Donald Nice, Jr. 6/24/02

Refurbished PdM Equipment Dave G 6/20/02

LabView Users and Virtual Instrumentation Howard Maxwell 6/20/02

Pulsation from Fan Pump Dino 6/18/02

Re: Pulsation from Fan Pump R Coan 9/24/02

Re: Pulsation from Fan Pump  9/24/02

Re: Pulsation from Fan Pump Arne Lindholm 6/23/02

Re: Pulsation from Fan Pump  6/28/02

Re: Pulsation from Fan Pump The Shaker 7/4/02

Re: Pulsation from Fan Pump Arne back for Don 6/30/02

Re: Pulsation from Fan Pump The ShakerRegards 6/19/02

Quick bearing frequencies Keith  6/18/02

Re: Quick bearing frequencies Sid B. 6/23/02

Re: Quick bearing frequencies Sasaki 6/23/02

Re: Quick bearing frequencies  6/20/02

Re: Quick bearing frequencies Dave G. www.reliabilitydirect.com 6/18/02

Used Bently Nevada 9000 dual monitor cards Jim @ DJ Plant 6/17/02

Re: Used Bently Nevada 9000 dual monitor cards Bob 9/8/04

As a former Tech with 10 years at BNC, I will repair them Carig Hundley 7/11/04

Re: As a former Tech with 10 years at BNC, I will repair them Craig Hundley 7/12/04

Re: Used Bently Nevada 9000 dual monitor cards Foxman 6/18/02

Re: Used Bently Nevada 9000 dual monitor cards jim @ DJ 6/18/02

setup system keith 6/15/02

Re: setup system Shawn 6/18/02

Vibration Analysis Training pjpiontek@ameren.comn 6/14/02

Re: Vibration Analysis Training Arne Lindholm 6/16/02

Re: Vibration Analysis Training Ali Al-Shurafa 6/16/02

Re: Vibration Analysis Training Shaking all over 6/15/02

Re: Vibration Analysis Training Dave G. www.reliabilitydirect.com 6/15/02

Re: Vibration Analysis Training mheijd@technofysica.nl 6/14/02

high vibes on vacuum pump michael.s.downie@grc.nasa.gov 6/14/02

Re: high vibes on vacuum pump mheijd@technofysica.nl 6/15/02

Balancing Engineer position in VA Tom Hammerstone 6/12/02

TORTIONAL VIBRATION DAMPER WS007 6/11/02

Re: TORTIONAL VIBRATION DAMPER robmooij@technofysica.nl 6/20/02

Re: TORTIONAL VIBRATION DAMPER mheijd@technofysica.nl 6/13/02

Re: TORSIONAL VIBRATION DAMPER Arne Lindholm 6/11/02

Re: TORSIONAL VIBRATION DAMPER  6/14/02

Date Problem of Data Collector Dataline IS Nasir Naqvi 6/5/02

Re: Date Problem of Data Collector Dataline IS WS007 6/11/02

Is there existing a special expert for gear fault diagnosis? Jun 6/5/02

Re: Is there existing a special expert for gear fault diagnosis? Schultheis 6/6/02

Re: Is there existing a special expert for gear fault diagnosis? veera 6/5/02

Is there existing a special expert for gear fault diagnosis? Jun 6/5/02

Re: Is there existing a special expert for gear fault diagnosis? ibrahimhc@vibratek.com.tr 6/15/02

dB and dBA Emad Ashor 6/5/02

Re: dB and dBA Alex J 6/6/02

Re: dB and dBA Emad Ashor 6/7/02

Re: dB and dBA mheijd@technofysica.nl 6/8/02

Re: dB and dBA Emad Ashor 6/8/02

Re: dB and dBA mheijd@technofysica.nl 6/13/02

How to calculation dB in acceleration. hkk1999@yahoo.com.hk 6/5/02

Re: How to calculation dB in acceleration.  6/5/02

Re: How to calculation dB in acceleration.  6/5/02

How to calculation dB in acceleration form. hkk1999@yahoo.com.hk 6/5/02

Beat Vibrations and its remedies rajendra_a_zope@ril.com 6/4/02

Re: Beat Vibrations and its remedies veera 6/5/02

Re: Beat Vibrations and its remedies Sid Booksh 6/5/02

FAG Bearings Joe Hagemeyer 6/3/02

Re: FAG Bearings Rick 10/11/02

Re: FAG Bearings Steve 6/8/02

Re: FAG Bearings  6/3/02

Re: FAG Bearings  6/6/02

Vibration energy staau 6/3/02

Re: Vibration energy Steve 6/8/02

MasterTrend Compatibility mabsi@tm.net.my 6/1/02

Re: MasterTrend Compatibility C. Dostie 7/12/02

Re: MasterTrend Compatibility Arne Lindholm 6/10/02

Re: MasterTrend Compatibility  6/9/02

Re: MasterTrend Compatibility Arne.Lindholm 6/12/02

Re: MasterTrend Compatibility  6/20/02

Novice needs help David Lynn 5/31/02

MARLIN PROBE WK 5/30/02

Re: MARLIN PROBE Byron Martin 6/13/02

Re: MARLIN PROBE Mark McGinn 5/30/02

Relative ans Seismic Readings on Feed Pump Ali Al-Shurafa 5/30/02

Re: Relative ans Seismic Readings on Feed Pump Richard Burton (raburton@ra.rockwell.com) 6/11/02

Re: Relative ans Seismic Readings on Feed Pump Ali Al-Shurafa 6/12/02

Re: Relative ans Seismic Readings on Feed Pump Richard Burton 6/13/02

Re: Relative ans Seismic Readings on Feed Pump Alex J 6/3/02

Re: Relative ans Seismic Readings on Feed Pump Schultheis 5/30/02

Re: Relative ans Seismic Readings on Feed Pump Slim 5/30/02

Machine Workhead Balancing JRickey 5/29/02

Please explain to me about the relationship of record length and Frequency Resolution Jun 5/28/02

Re: Please explain to me about the relationship of record length ... Sid Booksh 5/29/02

Re: Please explain to me about the relationship of record length ...  5/29/02

Re: Please explain to me about the relationship of record len... Jun 5/29/02

Re: Please explain to me about the relationship of record len... Richard Burton 5/31/02

GE /Bn accelerometer high mortality rate. dburk 5/28/02

Re: GE /Bn accelerometer high mortality rate. CB 5/29/02

Re: GE /Bn accelerometer high mortality rate. Skip Hartman 5/28/02

Re: GE /Bn accelerometer high mortality rate. Schultheis 5/28/02

Re: GE /Bn accelerometer high mortality rate. Skip Hartman 5/28/02

Re: GE /Bn accelerometer high mortality rate. dburk 5/28/02

Re: GE /Bn accelerometer high mortality rate. Thank you  5/29/02

Imbalance and unbalance Jamal Mohd 5/26/02

Re: Imbalance and unbalance  5/31/02

Re: Imbalance and unbalance WW 9/8/02

Re: Imbalance and unbalance Terry Tomlinson 5/26/02

Segment passing frequencies and defective teeth Matt Jardine, UNB 5/24/02

Re: Segment passing frequencies and defective teeth Allen Plymon 5/29/02

Re: Segment passing frequencies and defective teeth mheijd@technofysica.nl 5/26/02

Re: Segment passing frequencies and defective teeth mheijd@technofysica.nl 5/26/02

Re: Segment passing frequencies and defective teeth JM 5/25/02

Slow Speed Bearings / What to look for? jkapp@templeinland.com 5/24/02

Re: Slow Speed Bearings / What to look for? mheijd@technofysica.nl 5/26/02

Re: Slow Speed Bearings / What to look for? JM 5/25/02

CSI 2115 bthomas@merillat.com 5/23/02

Re: CSI 2115 ibrahimhc@vibratek.com.tr 5/26/02

Re: CSI 2115 Ron Stiemsma 5/23/02

4 Run Balancing Mokhtar B Mohd Tahir 5/23/02

Re: 4 Run Balancing Arne Lindholm 6/10/02

Re: 4 Run Balancing Don L 6/1/02

Re: 4 Run Balancing Don L 6/1/02

Re: 4 Run Balancing Charlie 5/23/02

Re: 4 Run Balancing gboudreau@nbpower.com 5/23/02

vibration in motor vertical Colombia 5/22/02

Re: vibration in motor vertical jason_chen@jaeger.com.tw 5/22/02

transducer extension for hard to reach areas-any ideas? uriah@bbdynamo.com 5/22/02

Re: transducer extension for hard to reach areas-any ideas? C. Dostie 7/12/02

Re: transducer extension for hard to reach areas-any ideas? Donald Nice, Jr. 5/22/02

Re: transducer extension for hard to reach areas-any ideas? carvalho_f@fis.srv.br 6/7/02

Pump Vibration Test Result Database Tom Hendrey, thendrey@ch2m.com 5/22/02

Re: Pump Vibration Test Result Database Tom Hendrey 4/28/04

Re: Pump Vibration Test Result Database samduck1@hotmail.com 2/15/04

Re: Pump Vibration Test Result Database samduck1@hotmail.com 2/15/04

MARLIN Temperature Magnet byron.martin@mecheng.adelaide.edu.au 5/21/02

Re: MARLIN Temperature Magnet Don Marshall 5/30/02

Re: MARLIN Temperature Magnet mheijd@technofysica.nl 5/24/02

Re: MARLIN Temperature Magnet Dave G. www.reliabilitydirect.com 5/22/02

Re: MARLIN Temperature Magnet WK 5/22/02

Re: MARLIN Temperature Magnet Byron Martin 5/30/02

cepstrum analysis Fakher Chaari (fa_attt@yahoo.fr) 5/21/02

Re: cepstrum analysis ibrahimhc@vibratek.com.tr 5/26/02

Re: cepstrum analysis Dave G.  www.reliabilitydirect.com 5/21/02

convert velocity to db or vice versa Steve 5/21/02

Re: convert velocity to db or vice versa ibrahimhc@vibratek.com.tr 5/26/02

Re: convert velocity to db or vice versa mheijd@technofysica.nl 5/24/02

RELATIONSHIP BETWEEN VELOCITY AND dB TARIQ 5/19/02

Re: RELATIONSHIP BETWEEN VELOCITY AND dB Sean Harding 5/20/02

Phase Reading Mousa Saidi 5/18/02

Re: Phase Reading Terry 5/21/02

Re: Phase Reading schultheis 5/21/02

Re: Phase Reading  5/21/02

Re: Phase Reading William C. Foiles 5/20/02

Re: Phase Reading Terry 5/19/02

Re: Phase Reading Schltheis 5/20/02

Re: Phase Reading Mousa Saidi 5/20/02

GMF newbie questions moejoe 5/17/02

Re: GMF newbie questions JM 5/25/02

Re: GMF newbie questions E Murphy 5/21/02

Re: GMF newbie questions Skip Hartman 5/18/02

Frequency Characteristics of Bearing Defects xsakasa 5/17/02

Re: Frequency Characteristics of Bearing Defects Sid Booksh 5/17/02

Fluctuating Vibration Emad Ashor 5/16/02

Re: Fluctuating Vibration Been there, Seen that 5/27/02

Re: Fluctuating Vibration jason_chen@jaeger.com.tw 5/16/02

transient vibration Jamal Mohd 5/16/02

Re: transient vibration  6/8/02

Vibration appeared during run down jazzhome@yahoo.com.hk 5/16/02

Re: Vibration appeared during run down viblee@kps.co.kr 5/20/02

Re: Vibration appeared during run down jason_chen@jaeger.com.tw 5/16/02

Re: Vibration appeared during run down mheijd@technofysica.nl 5/16/02

Re: Vibration appeared during run down schultheis 5/16/02

Re: Vibration appeared during run down jazzhome@yahoo.com.hk 5/16/02

Re: Vibration appeared during run down schultheis 5/17/02

Vibration appeared during run down jazzhome@yahoo.com.hk 5/16/02

Re: Vibration appeared during run down CB 6/28/02

Mxy  5/15/02

used equipment Lidel 5/15/02

Re: used equipment 1/19/05

Re: used equipment 1/19/05

Re: used equipment Used Vibration Analysis 5/7/04

Re: used equipment Charles Hart 5/16/02

Re: used equipment Donald Nice, Jr. 5/16/02

Recommissioning a Schenck Trebel balance stand wandadogmeat@att.net 5/14/02

Re: Recommissioning a Schenck Trebel balance stand Foxman 5/15/02

Re: Recommissioning a Schenck Trebel balance stand Dave G.  www.reliabilitydirect.com 5/15/02

Vibration in 'Pusher' Centrifuge D.Bleakley 14/05/02 5/14/02

Re: Vibration in 'Pusher' Centrifuge mheijd@technofysica.nl 5/14/02

Re: Vibration in 'Pusher' Centrifuge Ophuis operater netherlands 5/5/04

Re: Vibration in 'Pusher' Centrifuge 5/5/04

Bearing Housing Problem Hk 5/14/02

Re: Bearing Housing Problem E Murphy 5/21/02

Re: Bearing Housing Problem jazzhome@yahoo.com.hk 5/16/02

Re: Bearing Housing Problem Donald Nice, JR. 5/14/02

Re: Bearing Housing Problem Dave G. www.reliabilitydirect.com 5/14/02

Info Request - Quantifying changes in stiffness, damping, and/or nat freq Ben Wagner 5/13/02

Re: Info Request - Quantifying changes in stiffness, damping, and... jason_chen@jaeger.com.tw 5/13/02

Insitu balancing Mokhtar B mohd Tahir 5/10/02

Re: Insitu balancing lee 5/14/02

Re: Insitu balancing Alex J 5/15/02

Re: Insitu balancing Translator 5/14/02

Re: Insitu balancing schultheis 5/14/02

Re: Insitu balancing Sasaki 5/12/02

Re: Insitu balancing Alex J 5/11/02

rock crusher vibration katchris@earthlink.net 5/10/02

Re: rock crusher vibration Dave G. www.reliabilitydirect.com 5/11/02

Re: rock crusher vibration mheijd@technofysica.nl 5/12/02

rock crusher vibration katchris@earthlink.net 5/10/02

Bearing fault frequencies Harmonics generation Peter Pan 5/10/02

Re: Bearing fault frequencies Harmonics generation Dave G.  www.reliabilitydirect.com 5/11/02

Terms used in the suspensions of railroad cars Michael Gould 5/10/02

2hz vibration in drinking fountain water system rsales@fnal.gov 5/8/02

Re: 2hz vibration in drinking fountain water system  8/23/02

Re: 2hz vibration in drinking fountain water system  8/23/02

Re: 2hz vibration in drinking fountain water system  5/9/02

Re: 2hz vibration in drinking fountain water system Sid B. 5/9/02

Re: 2hz vibration in drinking fountain water system rsales@fnal.gov 5/16/02

Re: 2hz vibration in drinking fountain water system mheijd@technofysica.nl 5/8/02

Re: 2hz vibration in drinking fountain water system Schultheis 5/9/02

Re: 2hz vibration in drinking fountain water system rsales@fnal.gov 5/8/02

Re: 2hz vibration in drinking fountain water system mheijd@technofysica.nl 5/10/02

centrifugal blower fan radial impeller vibration c.venkatraman- INDIA 5/5/02

Re: centrifugal blower fan radial impeller vibration mheijd@technofysica.nl 5/8/02

Re: centrifugal blower fan radial impeller vibration Fritz  5/6/02

Re: centrifugal blower fan radial impeller vibration Sid B. 5/9/02

centrifugal blower fan radial impeller c.venkatraman- INDIA 5/5/02

Re: centrifugal blower fan radial impeller  5/9/02

What can we call this type of runout? Mohammed Y. AL-Qadheeb ( Saudi Aramco) qadheemy@mail.aramco.com.sa 5/3/02

Re: What can we call this type of runout? Terry Tomlinson 5/4/02

Oil Whirl in Tilt pad bearings Mike Boutin 5/3/02

Re: Oil Whirl in Tilt pad bearings Leonardo Urbiola, CIATEQ, A.C., lurbiola@ciateq.mx 2/21/05

Re: Oil Whirl in Tilt pad bearings electricpete 6/17/02

Re: Oil Whirl in Tilt pad bearings emurphya@aol.com 5/5/02

Re: Oil Whirl in Tilt pad bearings Ali Al-Shurafa 5/6/02

Re: Oil Whirl in Tilt pad bearings vasanth 5/5/02

Re: Oil Whirl in Tilt pad bearings Schultheis 5/4/02

Vibration Question regarding a GE 180x734 Generator rirayme@wcnoc.com 5/1/02

Re: Vibration Question regarding a GE 180x734 Generator rirayme@wcnoc.com 5/2/02

Re: Vibration Question regarding a GE 180x734 Generator mheijd@technofysica.nl 5/2/02

Re: Vibration Question regarding a GE 180x734 Generator Schultheis 5/2/02

Re: Vibration Question regarding a GE 180x734 Generator Schultheis 5/2/02

Re: Vibration Question regarding a GE 180x734 Generator Ron Stiemsma 5/1/02

same amplitude measurement staau 4/30/02

Re: same amplitude measurement mheijd@technofysica.nl 4/30/02

Rouout addition or subtraction Mohammed AL-Qadheeb (Saudi Aramco) 4/28/02

Re: Rouout addition or subtraction mheijd@technofysica.nl 4/28/02

Rouout addition and subtration Mohammed AL-Qadheeb (Saudi Aramco) 4/28/02

Rouout addition and subtration Mohammed AL-Qadheeb (Saudi Aramco) 4/28/02

Principle of operation and application with seismic pickup Lin Zhenyao :     lzyao@ynmail.com 4/24/02

High Vibration on Typhoon Gas Turbine Hot End Bearing noorul_ibad@ici.com 4/23/02

Re: High Vibration on Typhoon Gas Turbine Hot End Bearing vanrotev@bp.com 4/25/02

Re: High Vibration on Typhoon Gas Turbine Hot End Bearing Steve Schultheis 4/24/02

Re: High Vibration on Typhoon Gas Turbine Hot End Bearing Sasaki 4/23/02

Using laser displacement sensor measure vibration Yiben   (yibenlin@yahoo.com) 4/22/02

Re: Using laser displacement sensor measure vibration Keyence 8/22/02

Re: Using laser displacement sensor measure vibration mheijd@technofysica.nl 4/25/02

Re: Using laser displacement sensor measure vibration David Oliver 6/20/02

Re: Using laser displacement sensor measure vibration Lin Zhenyao :     lzyao@ynmail.com 4/24/02

Re: Using laser displacement sensor measure vibration Yiben 4/25/02

Re: Using laser displacement sensor measure vibration dgallagher@cmcpweb.com 4/22/02

Re: Using laser displacement sensor measure vibration David Miller (uk) 4/25/02

Re: Using laser displacement sensor measure vibration David Oliver 6/20/02

Damping of rolls thomas R. 4/22/02

Re: Damping of rolls arnelind@algonet.se 5/12/02

Re: Damping of rolls rob mooij 4/22/02

Example data required Nikik Kapur 4/22/02

Ask for E-mail and Fax No. Lin Zhenyao :     lzyao@ynmail.com 4/21/02

Re: Ask for E-mail and Fax No. Alex J 4/23/02

Abut  the frequency range Lin Zhenyao :     lzyao@ynmail.com 4/21/02

Converting mm/sec to inches/sec kwhiteway@cci-wabush.com 4/19/02

Re: Converting mm/sec to inches/sec J-Marc 4/22/02

Re: Converting mm/sec to inches/sec rob mooij 4/21/02

Re: Converting mm/sec to inches/sec electricpete 4/21/02

Re: Converting mm/sec to inches/sec viblee@kps.co.kr 4/20/02

Prox Probes VS Microlog Mike 4/16/02

Re: Prox Probes VS Microlog mheijd@technofysica.nl 4/17/02

Re: Prox Probes VS Microlog Ron Stiemsma 4/17/02

Re: Prox Probes VS Microlog Sid Booksh 4/17/02

2FL vibration problem-please help uriah@bbdynamo.com 4/16/02

Re: 2FL vibration problem-please help wsx.pdm 5/8/02

Re: 2FL vibration problem-please help wsx.pdm 5/8/02

Re: 2FL vibration problem-please help wsx.p 5/8/02

Re: 2FL vibration problem-please help w_f_strong@msn.com 4/29/02

Re: 2FL vibration problem-please help electricpete 4/21/02

Re: 2FL vibration problem-please help Uriah 4/19/02

Re: 2FL vibration problem-please help mheijd@technofysica.nl 4/20/02

Re: 2FL vibration problem-please help Alex J 4/18/02

Re: 2FL vibration problem-please help mheijd@technofysica.nl 4/17/02

Re: 2FL vibration problem-please help Shawn 4/17/02

Re: 2FL vibration problem-please help  4/17/02

Re: 2FL vibration problem-please help DNicejr 4/16/02

Vibration Terms Explaination Mokhtar Mohd Tahir 4/13/02

Re: Vibration Terms Explaination Dave G, www.reliabilitydirect.com 4/13/02

Hilbert transform Fakher Chaari (fa_attt@yahoo.fr) 4/13/02

Re: Hilbert transform Sid Booksh 4/14/02

Re: Hilbert transform mheijd@technofysica.nl 4/14/02

Re: Hilbert transform Fakher Chaari (fa_attt@yahoo.fr) 4/14/02

vertical press transfer of vibrations to residences michncnc@aol.com 4/12/02

Re: vertical press transfer of vibrations to residences emurphya@aol.com 5/5/02

Re: vertical press transfer of vibrations to residences mheijd@technofysica.nl 4/12/02

Sideband frequencies Ian McMillan (DEI) 4/12/02

Re: Sideband frequencies mheijd@technofysica.nl 4/12/02

Review JW Lund's 1974 Paper "Stability and damped critical speeds of a flexible rotor in Fluid Film Bearings" Rags 4/9/02

Re: Review JW Lund's 1974 Paper "Stability and damped critical sp... C. Hunter Cloud 4/9/02

Vibration damped stainless steel - HELP!! sales@euro-springs.demon.co.uk 4/9/02

Fan Vibration Steve 4/8/02

Re: Fan Vibration mheijd@technofysica.nl 4/8/02

VIBRATION ANALYSIS LEE 4/5/02

Re: VIBRATION ANALYSIS wyndell@vibcons.com 4/9/02

Re: VIBRATION ANALYSIS Dave G., www.reliabilitydirect.com 4/5/02

SHIP'S VIBRATION ws007au@yahoo.com 4/5/02

Re: SHIP'S VIBRATION ibrahimhc@vibratek.com.tr 4/9/02

Re: SHIP'S VIBRATION Sid B. 4/8/02

Re: SHIP'S VIBRATION ibrahimhc@vibratek.com.tr 4/8/02

Re: SHIP'S VIBRATION mheijd@technofysica.nl 4/6/02

Re: SHIP'S VIBRATION ws007au 4/8/02

Re: SHIP'S VIBRATION Sid B. 4/5/02

Re: SHIP'S VIBRATION WS007AU 4/8/02

Re: SHIP'S VIBRATION mheijd@technofysica.nl 4/8/02

Re: SHIP'S VIBRATION Ron Hartlen 4/8/02

Re: SHIP'S VIBRATION Arne Lindholm 4/11/02

Re: SHIP'S VIBRATION ws007 4/23/02

Re: SHIP'S VIBRATION Arne Lindholm /arnelindAalgonet.se/ 5/12/02

Re: SHIP'S VIBRATION mheijd@technofysica.nl 4/12/02

Re: SHIP'S VIBRATION Ron Hartlen 4/11/02

What do you think? Mike 4/4/02

Re: What do you think? Earl 4/4/02

Re: What do you think? Charlie Hart 4/4/02

Newbie  need help with getting started Tin 4/2/02

Re: Newbie  need help with getting started J-Marc 4/4/02

Re: Newbie  need help with getting started noorul_ibad@ici.com 4/4/02

Re: Newbie  need help with getting started J. Bonner 4/3/02

Re: Newbie  need help with getting started J. Bonner 4/3/02

Re: Newbie  need help with getting started J-Marc 4/3/02

Re: Newbie  need help with getting started Dave G. www.reliabilitydirect.com 4/3/02

Re: Newbie  need help with getting started  4/2/02

Mechanical seal test equipment trem@trem.ru 4/2/02

Re: Mechanical seal test equipment Alex J 4/3/02

Aura Shakers/ Active Noise/Vibration Cancellation oshea4@mindspring.com 3/29/02

Re: Aura Shakers/ Active Noise/Vibration Cancellation erwin sister (erwin_sister@yahoo.com) 5/6/04

Phase & Vibe data on GE steam turbines Rick Ulrich 3/29/02

Re: Phase & Vibe data on GE steam turbines Michael Titone 3/31/02

Re: Michael Titone respond Rick Ulrich 4/4/02

Rotor Bar Frequency Steve 3/28/02

Re: Rotor Bar Frequency  4/17/02

Re: Rotor Bar Frequency Richard Burton (raburton@ra.rockwell.com) 3/29/02

Re: Rotor Bar Frequency Steve 4/7/02

Re: Rotor Bar Frequency Skip Hartman (skip@machinerywatch.com) 3/28/02

Phase readings from a shaft that you can not see ibrahimhc@vibratek.com.tr 3/28/02

Re: Phase readings from a shaft that you can not see Richard Burton (raburton@ra.rockwell.com) 3/29/02

Re: Phase readings from a shaft that you can not see mheijd@technofysica.nl 3/28/02

Re: Phase readings from a shaft that you can not see emurphya@aol.com 3/28/02

Re: Phase readings from a shaft that you can not see mheijd@technofysica.nl 3/29/02

Gear vibration interpretation Fakher Chaari (fa_attt@yahoo.fr) 3/24/02

Re: Gear vibration interpretation Wyndell@vibcons.com 3/25/02

Re: Gear vibration interpretation Charlie 3/24/02

FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) noorul_ibad@ici.com 3/21/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) vanrotev@bp.com 4/10/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!)  3/27/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) Ali Al-Shurafa 3/27/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) emurphya@aol.com 3/21/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!)  3/24/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) Ali Al-Shurafa 3/21/02

Re: FRICK COMPRESSOR:Sudden Vibration Spike (URGENT!) mheijd@technofysica.nl 3/21/02

VIBRATION LIMIT FOR A CANTILEVER GAS TURBINE hafiz_tariq@yahoo.com 3/20/02

Remote Diagnosis zfzfzf 3/20/02

Re: Remote Diagnosis ibrahimhc@vibratek.com.tr 3/29/02

Balancing Jone 3/18/02

Re: Balancing Terry Tomlinson 3/21/02

Re: Balancing emurphya@aol.com 3/21/02

Re: Balancing  3/19/02

Re: Balancing jclough 3/19/02

Re: Balancing  3/20/02

Re: Balancing 1/23/05

Reflective tape & GE turbine vib data Rick Ulrich 3/15/02

Re: Reflective tape & GE turbine vib data DaveG, www.reliabilitydirect.com 3/17/02

Re: Reflective tape & GE turbine vib data mheijd@technofysica.nl 3/16/02

Re: Reflective tape & GE turbine vib data Foxman 3/15/02

Re:Foxman Reflective tape info Rick Ulrich 3/15/02

Re:Foxman Reflective tape info Foxman 3/18/02

Re:Foxman paint amount  3/19/02

Re:Foxman paint amount Dave G. www.reliabilitydirect.com 3/20/02

Re:Foxman paint amount Foxman 3/19/02

Re:Foxman Reflective tape info Schultheis 3/18/02

Pump flow surge Rick Ulrich 3/15/02

Re: Pump flow surge Alex J 3/18/02

Re: Pump flow surge rick 3/19/02

Re: Pump flow surge Derek Da Silva 4/3/02

Re: Pump flow surge mheijd@technofysica.nl 3/16/02

Peak vibration vs Spectral analysis Joe Wieliczko 3/14/02

Re: Peak vibration vs Spectral analysis mheijd@technofysica.nl 3/16/02

Re: Peak vibration vs Spectral analysis Shawn 3/15/02

Methane pump  get  damage ball bearing earlier  in 1month only Gunawan Hermanto (gunawan@petronas.com.my) 3/13/02

Re: Methane pump  get  damage ball bearing earlier  in 1month only nicolas 6/28/02

Re: Methane pump  get  damage ball bearing earlier  in 1month only  3/13/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... Gunawan 3/13/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... mheijd@technofysica.nl 3/16/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo...  3/18/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... mheijd@technofysica.nl 3/18/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... Gunawan Hermanto 3/19/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... mheijd@technofysica.nl 3/20/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... Gunawan 3/13/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo...  3/14/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo...  3/21/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... Ian Kinnaird 3/18/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... Gunawan Hermanto 3/19/02

Re: Methane pump  get  damage ball bearing earlier  in 1mo... gunawan 3/18/02

Methane pump  get  damage ball bearing earlier  in 1month only Gunawan Hermanto (gunawan@petronas.com.my) 3/13/02

Absorbers VI Level 3 page VC-6-10 3/12/02

Re: Absorbers Malcolm Leader 3/14/02

Re: Absorbers William C. Foiles 3/24/02

Re: Absorbers William C. Foiles 3/13/02

Re: Absorbers  3/12/02

Re: Absorbers P. Dowdican 3/12/02 3/12/02

Re: Absorbers Ali Al-Shurafa 3/25/02

Re: Absorbers mheijd@technofysica.nl 3/25/02

VIBRATION ANALYZERS Abdul Haq , e-mail: abdul.haq@lasmo.com.pk 3/12/02

Re: VIBRATION ANALYZERS Skip Hartman 3/20/02

Re: VIBRATION ANALYZERS Skip Hartman 3/20/02

Re: VIBRATION ANALYZERS Sid Booksh 3/18/02

Re: VIBRATION ANALYZERS Alan Friedman 3/18/02

Re: VIBRATION ANALYZERS mheijd@technofysica.nl 3/21/02

Re: VIBRATION ANALYZERS mheijd@technofysica.nl 3/16/02

Re: VIBRATION ANALYZERS Charlie Hart 3/15/02

Re: VIBRATION ANALYZERS  9/6/02

Re: VIBRATION ANALYZERS AADHI AGILAN 3/19/02

Re: VIBRATION ANALYZERS Dave Miller (uk) 3/13/02

Dual Channel Vibration Analyzer ABDUL HAQ 3/12/02

Re: Dual Channel Vibration Analyzer Sid B. 3/12/02

Field Balancing of High Speed Rotors AADHI AGILAN 3/11/02

Re: Field Balancing of High Speed Rotors mheijd@technofysica.nl 3/16/02

Balancing Machine Foxman 3/11/02

Re: Balancing Machine JM 3/12/02

Re: Balancing Machine jclough 3/12/02

Bently Nevada 7,200 series equipment required Dave Brown e-mail david.brown@beck-pollitzer.com 3/8/02

Re: Bently Nevada 7,200 series equipment required Foxman 3/14/02

Re: Bently Nevada 7,200 series equipment required Catawba Nuclear Station 3/12/02

Re: Bently Nevada 7,200 series equipment required Marty W 6/26/02

Re: Bently Nevada 7,200 series equipment required Mark Meyrick 6/12/02

Re: Bently Nevada 7,200 series equipment required mpchrist@bossig.com 1/10/05

New Company will repair Bently 9000 & 7200 Craig Hundley 7/16/04

Re: Bently Nevada 7,200 series equipment required Dave Gallagher, www.stiweb.com 3/8/02

High axial vibrations in a blower R A Zope (rajendra_a_zope@ril.com) 3/6/02

Re: High axial vibrations in a blower J-Marc 3/7/02

Mounting of velocity transducers Joseph Joyce 3/6/02

Re: Mounting of velocity transducers Sid Booksh 3/6/02

Re: Mounting of velocity transducers Charlie Hart 3/7/02

Mounting of velocity transducers Joseph Joyce 3/6/02

Vibration monitoring on Screens LUIS MORENO JAQUE 3/5/02

Re: Vibration monitoring on Screens dgallagher, www.stiweb.com 3/10/02

HIGH 2X WITH SLIP FREQ. SIDEBANDS Gary Wellington (wellingtongary@aol.com) 3/5/02

Is it Couple Unbalance or Bent Shaft or Electrical induced problem? THENARUVI 3/3/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induced pr... mheijd@technofysica.nl 3/16/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induced pr... Jason Chen 3/6/02

 

Re: Is it Couple Unbalance or Bent Shaft or Electrical induce... THENARUVI 3/7/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induced pr... Richard Burton (raburton@ra.rockwell.com) 3/4/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induce... THENARUVI 3/4/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induce... Richard Burton (raburton@ra.rockwell.com) 3/7/02

Re: Is it Couple Unbalance or Bent Shaft or Electrical induce... THENARUVI 3/7/02

Re: Current Signature Sidebands Richard Burton 3/8/02

Calculating third-octave bands Joao 3/3/02

Vib Inst Level 1 Cert. JM 3/2/02

.75x rpm on pump and motor michael.s.downie@grc.com 2/27/02

Re: .75x rpm on pump and motor Ali Al-Shurafa 3/1/02

Re: .75x rpm on pump and motor WSX.PDM 5/8/02

Interesting Gas Turbine Bearing D. Maloy 2/26/02

Vibration in piping (Natural freq of rings) Mike Boutin 2/25/02

 

Re: Vibration in piping (Natural freq of rings) Sid Booksh 2/26/02

Re: Vibration in piping (Natural freq of rings) Skip Hartman 2/25/02

Rotojet Pump Cavitation dharden333@earthlink.net 2/24/02

Re: Rotojet Pump Cavitation MELeader@Houston.RR.COM 3/10/02

Why are harmonics of strings not even multiples of the fundamental? D. Nance 2/23/02

Re: Why are harmonics of strings not even multiples of the fundam...  3/7/02

Re: Why are harmonics of strings not even multiples of the fundam... Terry Tomlinson 2/24/02

Re: Why are harmonics of strings not even multiples of the fundam... C. Hunter Cloud 2/24/02

Re: Why are harmonics of strings not even multiples of the fundam... Sid Booksh 2/23/02

Gear vibration interpretation Fakher Chaari (fa_attt@yahoo.fr) 2/22/02

Capper Bull Gear Bob Hillard 2/21/02

Torsional Vibration Skip Hartman 2/21/02

Re: Torsional Vibration Malcolm Leader 2/24/02

Re: Torsional Vibration Skip Hartman 2/25/02

Re: Torsional Vibration mheijd@technofysica.nl 2/22/02

Re: Torsional Vibration Skip Hartman 2/22/02

Re: Torsional Vibration Ron Hartlen 2/21/02

2-plane balance algorithm/formula Larry 2/20/02

Re: 2-plane balance algorithm/formula Viktor718@aol.com 11/29/03

Re: 2-plane balance algorithm/formula Byron Martin 3/4/02

IRD general severity chart Emad Ashor 2/20/02

Re: IRD general severity chart David Gallagher, www.reliabilitydirect.com 2/21/02

Re: IRD general severity chart Emad Ashor 2/21/02

Yankee Dyer Pressure Roll Randy Lambert 2/19/02

Re: Yankee Dyer Pressure Roll Skip Hartman 2/20/02

Yankee Dyer Pressure Roll Randy Lambert 2/19/02

Need help on Instrument, Sensor,  Hard Disk Rotational Random Vibration Test Specs. G Henderson 2/19/02

How to analyze Bode Plots Jamal Mohd 2/19/02

Re: How to analyze Bode Plots ibrahimhc@vibratek.com.tr 3/30/02

Vibration of water injection pump increase to trip level after 1 - 2 hours running akeamara@yahoo.com 2/19/02

Re: Vibration of water injection pump increase to trip level afte... Alex J 2/19/02

Three Plane Balancing Sabu 2/18/02

Re: Three Plane Balancing Terry Tomlinson 2/18/02

Re: Three Plane Balancing Jone 2/20/02

Re: Three Plane Balancing Terry Tomlinson 2/21/02

Re: Three Plane Balancing cheldon09@direcway.com 10/12/03

RadiaL Vibration @ 1 X rpm on inboard pump bearing of dirrect drive, double suction pump. B. Davidson @ Krauth Electric. 2/18/02

Re: RadiaL Vibration @ 1 X rpm on inboard pump bearing of dirrect...  3/7/02

Re: RadiaL Vibration @ 1 X rpm on inboard pump bearing of dirrect... Ron Stiemsma 2/18/02

1x   2x     3x running speed lisa 2/18/02

Re: 1x   2x     3x running speed Sid 2/18/02

Balancing sabu 2/17/02

Re: Balancing ahmeddokki@hotmail.com 2/19/02

Applying Wavelet for Vibration Analysis Frank TSE(franktse@emsd.gov.hk) 2/15/02

Re: Applying Wavelet for Vibration Analysis Sasaki 2/18/02

CSI 2115 petromex@hotmail.com 2/15/02

CSI 2115 usado mikepaul@hunterlink.net.au 4/19/02

Vertical Alignment, II Mike Badger 2/14/02

Re: Vertical Alignment, II Charlie 2/14/02

Static couple derivation? uriah@bbdynamo 2/14/02

Re: Static couple derivation? Terry Tomlinson 2/14/02

Re: Static couple derivation? Uriah 2/15/02

Re: Static couple derivation? Richard Burton (raburton@ra.rockwell.com) 2/18/02

Re: Static couple derivation? Terry Tomlinson 2/15/02

Re: Static couple derivation? Terry Tomlinson 2/15/02

Re: Static couple derivation? J-Marc 2/15/02

0.5x component on Turbine Gas Generator Steve 2/14/02

Re: 0.5x component on Turbine Gas Generator smschultheis@aol.com 2/15/02

Re: 0.5x component on Turbine Gas Generator Steve 2/15/02

Re: 0.5x component on Turbine Gas Generator Sid Booksh 2/14/02

Condition evaluation based on absolute vibration Jamal Mohd 2/14/02

Re: Condition evaluation based on absolute vibration Frank TSE 2/15/02

frame6 ge gas turbines Ray Nixon Power Plant 2/13/02

Re: frame6 ge gas turbines svg@thomassen-ts.nl 1/10/05

Re: frame6 ge gas turbines svg@thomassen-ts.nl 1/10/05

Re: frame6 ge gas turbines svg@thomassen-ts.nl 1/10/05

9B John Crane seal Anglin 2/12/02

Re: Vertical Alignment Charlie 2/11/02

Vibration Analysis of ALSTOM GAST TURBINE: TYPHOON  2/11/02

ABNORMAL VIBRATION PEAK A DIESEL GENERATOR 700 KW 8 CYLINDER 4 STROKE 2/9/02

Re: ABNORMAL VIBRATION PEAK  2/13/02

Re: ABNORMAL VIBRATION PEAK ibrahimhc@vibratek.com.tr 2/13/02

Re: ABNORMAL VIBRATION PEAK Sid B. 2/9/02

Re: ABNORMAL VIBRATION PEAK hafiz_tariq@YAHOO.COM 2/13/02

Re: ABNORMAL VIBRATION PEAK rob mooij - rob@comp.nl 2/13/02

Re: ABNORMAL VIBRATION PEAK hafiz_tariq 2/17/02

Re: ABNORMAL VIBRATION PEAK mheijd@technofysica.nl 2/19/02

Small Rotational Shaker for Simulation of Brinelling on HDs A. B. Schwartz 2/8/02

Finding the natural frequency Ali Al-Shurafa 2/8/02

Planetary Epicyclic Signatures Calling Shawn & Sid Syed Noorul Ibad (noorul_ibad@ici.com) 2/7/02

Re: Planetary Epicyclic Signatures Calling Shawn & Sid aegibson@dukeengineering.com 2/26/02

Re: Planetary Epicyclic Signatures Calling Shawn & Sid Sid 2/7/02

Re: Planetary Epicyclic Signatures Calling Shawn & Sid Shawn 2/7/02

Berry, James E. "How to  track rolling element bearings health with vibration signature analysis" sorhan 2/6/02

Re: Berry, James E. "How to  track rolling element bearings healt... Shawn 2/6/02

Balance a cardan shaft ahmeddokki@hotmail.com 2/5/02

Vibration analyser which can comincate with CSI Software R.A.Zope (rajendra_a_zope@ril.com) 2/4/02

Re: Vibration analyser which can comincate with CSI Software Shannon Harwell 2/12/02

Re: Vibration analyser which can comincate with CSI Software Shannon 2/12/02

911: isolating bed from floor vibrations pmaxx@earthlink.net 2/4/02

Re: 911: isolating bed from floor vibrations ibrahimhc@vibratek.com.tr 2/14/02

Re: 911: isolating bed from floor vibrations Charlie Hart 2/5/02

Re: 911: isolating bed from floor vibrations smschultheis@aol.com 2/5/02

Re: 911: isolating bed from floor vibrations  2/5/02

Paper Machines Bowed Roll Don Lagasse 2/4/02

Re: Paper Machines Bowed Roll Bim Becker 2/25/02

Re: Paper Machines Bowed Roll Skip Hartman 2/5/02

Re: Paper Machines Bowed Roll C. Dostie 2/8/02

Re: Paper Machines Bowed Roll Terry Tomlinson 2/11/02

Frame resonance and critical speed jason Chen 2/3/02

Re: Frame resonance and critical speed Marcel 2/4/02

Vibraciones en Español javier castillo  1/30/02

Re: Vibraciones en Español Parsifal de Lyon 3/22/02

Re: Vibraciones en Español Manel Montesinos 2/2/02

Re: Vibraciones en Español Mario 2/2/02

Re: Vibraciones en Español David Gallagher, www.reliabilitydirect.com 1/30/02

Converting Mils to Oz/Inches Jason Herman 1/30/02

Re: Converting Mils to Oz/Inches 3/30/04

Re: Converting Mils to Oz/Inches Terry Tomlinson 2/12/02

Re: Converting Mils to Oz/Inches SERGE 2/2/02

Re: Converting Mils to Oz/Inches Sid Booksh 2/1/02

Re: Converting Mils to Oz/Inches Jason Herman 2/1/02

Re: Converting Mils to Oz/Inches Sid Booksh 2/1/02

Re: Converting Mils to Oz/Inches Jason Herman 2/1/02

Re: Converting Mils to Oz/Inches Sid Booksh 2/3/02

Re: Converting Mils to Oz/Inches jclough 2/5/02

Re: Converting Mils to Oz/Inches Sid Booksh 2/1/02

Re: Converting Mils to Oz/Inches Shawn 1/30/02

PMC/BEAT Analyzer wanted Dave 1/30/02

PMC BETA JJ 1/30/02

Down loading orbits from 2120 to computer George Anglin 1/30/02

Re: Down loading orbits from 2120 to computer rhodes2r@msn.com 5/20/02

8 X Line Frequency sky 1/29/02

6 point balance test george.c.anglin@conoco.com 1/29/02

Re: 6 point balance test C. Hunter Cloud (CHC5E@Virginia.Edu 1/30/02

Re: 6 point balance test David Gallagher, www.reliabilitydirect.com 1/29/02

Whats out there for portable collectors/analyziers with balancing capaibilitys kazregis@agate.net 1/28/02

Re: Whats out there for portable collectors/analyziers with balan... Charlie Hart 1/29/02

Re: Whats out there for portable collectors/analyziers with balan... Dnicejr 1/28/02

Vibration characteristics of Epicyclic Planetary Gearboxes Syed Noorul Ibad (noorul_ibad@ici.com) 1/23/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes Shawn 1/23/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes Wyndell@vibcons.com 1/30/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes noorul_ibad@ici.com 1/24/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes noorul_ibad@ici.com 1/24/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes Marcel  2/2/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes Shawn 1/25/02

Re: Vibration characteristics of Epicyclic Planetary Gearboxes Sid Booksh 1/25/02

0.75 x vibration zalie 1/19/02

Re: 0.75 x vibration Sid Booksh 1/19/02

Re: stall? ibrahimhc@vibratek.com.tr 1/22/02

Re: stall? Dave Gallagher, www.reliabilitydirect.com 1/22/02

Conventional use of mils  1/18/02

Re: Conventional use of mils Kris Sonne 1/23/02

Re: Conventional use of mils J-Marc 1/18/02

Re: Conventional use of mils C. Barnett 1/18/02

Re: Conventional use of mils J-Marc 1/18/02

Re: Conventional use of mils Don 1/22/02

Course on Practical Aspects of Rotor Dynamics and On-line Condition Monitoring with Diagnostics S.T.ANBUKKANI  1/18/02

"Full Spectrum" usefullness Sid Booksh (mts.ak@att.net) 1/16/02

Re: "Full Spectrum" usefullness Ali M. Al-Shurafa 2/22/02

Re: "Full Spectrum" usefullness Ali M. Al-Shurafa 2/22/02

Re: "Full Spectrum" usefullness Mike Boutin 1/31/02

Re: "Full Spectrum" usefullness Sid Booksh 2/4/02

Job classification and salary ranges Greg 1/14/02

Importance of gearbox load on vibration severity Dean Renneberg 1/14/02

Re: Importance of gearbox load on vibration severity Ing. Javier Rodríguez 2/15/02

Re: Importance of gearbox load on vibration severity Ing. Javier Rodríguez 2/15/02

Re: Importance of gearbox load on vibration severity Shawn 1/14/02

Re: Importance of gearbox load on vibration severity ibrahimhc@vibratek.com.tr 1/15/02

Automated Shaft Alignment Systems Danny Harris 1/12/02

About  Accelerometers  for Vibration Monitoring Lin Zhenyao :     lzyao@ynmail.com 1/12/02

Re: About  Accelerometers  for Vibration Monitoring Vasanth 1/13/02

Godet motor John 1/7/02

Ge Motors Keith 1/7/02

Re: Ge Motors George 4/24/03

Re: Ge Motors Mike Morris 1/17/03

Re: Ge Motors Charles Hart 1/11/02

Re: Ge Motors Donald N ice, JR 1/7/02

basic question Sunil Sharma 1/7/02

Daiu 208P and ADRE multichannel analyser Wiriton S. de Matos 1/6/02

Re: Daiu 208P and ADRE multichannel analyser Chris Wilcox 1/7/02

Balancing by using orbits Sid Booksh 1/6/02

Re: Balancing by using orbits Ali M. Al-Shurafa 2/22/02

Re: Balancing by using orbits tien@chula.com 1/17/02

Re: Balancing by using orbits Malcolm Leader 1/11/02

how to make balancing at workshop? tien@chula.com 1/4/02

Re: how to make balancing at workshop? Alex J 2/5/02

vibration limits hafiz_tariq@yahoo.com 1/2/02

Re: vibration limits Malcolm Leader 1/11/02

Re: vibration limits Dave Miller (uk) 1/5/02

Balancing Specs. Jack Porter 1/2/02

Re: Balancing Specs. vasanth 1/4/02

Re: Balancing Specs. jclough 1/3/02

Interpretation of Campbell diagram AADHI AGILAN 12/27/01

Re: Interpretation of Campbell diagram dgallagher@ghg.net 12/28/01

Re: Interpretation of Campbell diagram Saif Al-Farsi-Petroleum Development Oman 3/1/03

Re: Interpretation of Campbell diagram zmazur@cableonline.com.mx 7/31/04

NVH in Power Plants Mani 12/27/01

Household Appliance Vibration Damping curious dweller 12/22/01

Re: Household Appliance Vibration Damping Arne Lindholm  5/12/02

Re: Household Appliance Vibration Damping ibrahimhc@vibratek.com.tr 12/26/01

Re: Household Appliance Vibration Damping shawn smith 9/27/04

Positive displacement blowers jherman 12/21/01

Re: Positive displacement blowers Flyashblowers@cs.com 4/14/04

Re: Positive displacement blowers Mark Caudrey 8/22/02

Re: Positive displacement blowers jim p 12/31/01

Re: Positive displacement blowers Vasanth 12/22/01

Re: Positive displacement blowers jherman 1/2/02

DC Motor Vibration Bubba 12/20/01

Re: DC Motor Vibration Richard Burton (raburton@ra.rockwell.com) 1/3/02

Re: DC Motor Vibration Bubba 1/8/02

Fari price per unit !!!!??? HELP ! 12/15/01

Re: Fari price per unit !!!!??? ibrahimhc@vibratek.com.tr 12/25/01

Balance Software RT 12/12/01

Re: Balance Software Malcolm Leader 1/11/02

Re: Balance Software byron.martin@bigpond.com 1/8/02

Re: Balance Software Charlie Hart 12/16/01

Re: Balance Software Dave G 12/13/01

Re: Balance Software Jim F 12/18/01

Extreme High Frequency Toddini 12/11/01

Re: Extreme High Frequency  2/26/02

Re: Extreme High Frequency Dave Miller (uk) 12/12/01

Re: Extreme High Frequency Toddini 12/12/01

Re: Extreme High Frequency Dave Miller (uk) 12/13/01

Alternator Shaft vibration kkraja 12/11/01

Gas Turbines Tom 12/9/01

Re: Gas Turbines rtreloar@oempartsnetwork.com 4/9/02

Re: Gas Turbines rtreloar@oempartsnetwork.com 4/9/02

Re: Gas Turbines www.oempartsnetwork.com 2/28/02

Re: Gas Turbines Donald Nice, JR. 12/10/01

Overall Value Alex&Luca 12/4/01

Re: Overall Value noggin 2/15/02

Re: Overall Value Tom Irvine 12/6/01

Filtering of Orbit Display Jim P 12/4/01

Prism4 Ver 1.33 Byron Martin byron.martin@mecheng.adelaide.edu.au 12/3/01

Poles of vibration Tito 12/1/01

Electrical line frequency in an AC motor Don 11/29/01

Re: Electrical line frequency in an AC motor Sasaki 12/2/01

Re: Electrical line frequency in an AC motor veera 11/29/01

Re: Electrical line frequency in an AC motor KG 11/30/01

Re: Electrical line frequency in an AC motor Don 11/30/01

Re: Electrical line frequency in an AC motor electricpete 12/27/01

Re: Electrical line frequency in an AC motor John 12/7/01

Re: Electrical line frequency in an AC motor Jason Chen 12/11/01

Balancing of Flexible Rotor at Below Critical Speed hanys 11/25/01

Re: Balancing of Flexible Rotor at Below Critical Speed 3/14/04

square orbits Mike Boutin 11/22/01

Re: square orbits Vasanth  11/22/01

Torsional Response Detuning cdeters001@aol.com 11/21/01

Re: Torsional Response Detuning Marcel 2/2/02

Natural frecuencies of Bearings Juan Escobar 11/15/01

Re: Natural frecuencies of Bearings rob mooij 1/29/02

Re: Natural frecuencies of Bearings Mick 12/5/01

Re: Natural frecuencies of Bearings kverspoor 11/19/01

Instability caused by reducing preload of a tilting pad bearing Sha Shen   email:u639260@taipower.com.tw 11/14/01

Re: Instability caused by reducing preload of a tilting pad bearing Malcolm Leader 1/11/02

Re: Instability caused by reducing preload of a tilting pad bearing Steve 11/14/01

ASD and PSD John Chmielewski 11/14/01

Re: ASD and PSD mlandry@hns.com 4/28/03

TRIANGULATION FOR VIBRATION MONITORING Pete O'Connell 11/11/01

Re: TRIANGULATION FOR VIBRATION MONITORING Ed Gibson 12/3/01

Re: TRIANGULATION FOR VIBRATION MONITORING Ed Gibson 12/3/01

Re: TRIANGULATION FOR VIBRATION MONITORING Sid B. 11/12/01

TRIANGULATION FOR VIBRATION MONITORING Pete O'Connell 11/11/01

Field balancing of Centrifugal fans prokumar@vsnl.in 11/9/01

Re: Field balancing of Centrifugal fans J-Marc 11/9/01

What kind of accelerometer do I need? S Adcox 11/9/01

Re: What kind of accelerometer do I need? Dave G. 11/11/01

Re: What kind of accelerometer do I need? Dave Change at Dytran Instruments, Inc. 11/9/01

HYDROSTATIC BEARING CHECKING Prashant.Hande 11/9/01

Gentac Centrifugal Compressor Xing 11/9/01

Re: Gentac Centrifugal Compressor Charlie Hart 11/9/01

Re: Gentac Centrifugal Compressor SERGIO 4/11/03

Re: Gentac Centrifugal Compressor CENTAC 4/11/03

Re: Gentac Centrifugal Compressor Xing 11/12/01

Re: Gentac Centrifugal Compressor Charlie Hart 11/28/01

Re: Gentac Centrifugal Compressor Charlie Hart 11/19/01

electric motors with inverter ( FREQUENCY CONTROL) Márcio Tadeu 11/8/01

Re: electric motors with inverter ( FREQUENCY CONTROL) erwin 1/18/02

Active Anti-Vibration Devices charlie_b_PE 11/6/01

Re: Active Anti-Vibration Devices vasanth 11/8/01

Seeking Engineers for Employment vibsnd@singnet.com.sg 11/5/01

Re: Seeking Engineers for Employment araujogiovanni@hotmail.com 12/3/01

tAKING VIBRATION READING ON A TRANE CHILLER JOHN 11/2/01

Re: tAKING VIBRATION READING ON A TRANE CHILLER J-Marc 11/6/01

Re: tAKING VIBRATION READING ON A TRANE CHILLER  11/5/01

Re: tAKING VIBRATION READING ON A TRANE CHILLER Keith 11/5/01

Re: tAKING VIBRATION READING ON A TRANE CHILLER Charlie Hart 11/5/01

vibration measuring equipments Myung 10/30/01

Re: vibration measuring equipments J. Graves 11/24/01

Re: vibration measuring equipments Veera 10/30/01

Re: vibration measuring equipments Myung 10/31/01

Re: vibration measuring equipments Wiriton Silva de Matos 2/16/02

Re: vibration measuring equipments- requirement of quotqtion regardin harihaean@kongu.ca.in 7/13/03

Re: vibration measuring equipments Veera 11/1/01

Re: vibration measuring equipments  11/6/01

vibration measuring equipments Myung 10/30/01

When Vibration Probes Don't Agree afphillips@cmsenergy.com 10/30/01

Re: When Vibration Probes Don't Agree Dave Miller (uk) 10/30/01

When Vibration Probes Don't Agree afphillips@cmsenergy.com 10/30/01

CommTest VB2000 Byron Martin (byron.martin@bigpond.com) 10/29/01

Re: CommTest VB2000 Duane Dobson 10/30/01

Re: CommTest VB2000 Dave G. 10/30/01

Dynamic Vibration Absorber ankmi@rediffmail.com 10/27/01

Re: Dynamic Vibration Absorber n.jobert@laposte.net 11/3/01

Re: Dynamic Vibration Absorber Dave Miller (uk) 10/27/01

Harmonic mixer nind99@yahoo.com 10/26/01

Hot Bearing Temp jim p 10/23/01

Re: Hot Bearing Temp Malcolm Leader 10/26/01

Re: Hot Bearing Temp jim p 10/26/01

Re: Hot Bearing Temp Malcolm Leader 11/3/01

Re: Hot Bearing Temp jim p 11/12/01

vibration on electric driver keeslaseur@hotmail.com 10/21/01

Re: vibration on electric driver Veera 10/29/01

Re: vibration on electric driver Ing. Javier Rodríguez 10/23/01

Re: vibration on electric driver Shawn  10/22/01

Basic Question No. 4 Sayed Ali Al-Shurafa   10/19/01

vibration & shock levels on board of a chemical tanker pdk@rj-associates.com 10/19/01

Re: vibration & shock levels on board of a chemical tanker Dave Miller (uk) 10/20/01

Modal Analysis Juan Escobar 10/18/01

Re: Modal Analysis vs Operating Deflection Shape n.jobert@laposte.net 11/3/01

Re: Modal Analysis Malcolm Leader 10/26/01

Re: Modal Analysis Dave Miller (uk) 10/26/01

Re: Modal Analysis Ron Hartlen 10/18/01

Infrared\Thermography Training kpatterson@koontz-wagner 10/18/01

Re: Infrared\Thermography Training Niclas 3/7/02

Re: Infrared\Thermography Training Steve Zeise (steve.zeise@flir.com) 10/30/01

Re: Infrared\Thermography Training Mark Blake 10/25/01

Re: Infrared\Thermography Training Ron Stiemsma 10/18/01

Vibration Spectrum of Gear Pumps Mohamed F. Mohamed (Dynegy Midwest Gen) 10/17/01

Procedures stokesjw@bp.com 10/17/01

torsional vibration measurement using telemetry system murali 10/13/01

Re: torsional vibration measurement using telemetry system 7/6/03

Re: torsional vibration measurement using telemetry system Marcel 2/2/02

Re: torsional vibration measurement using telemetry system Malcolm Leader 10/26/01

Re: torsional vibration measurement using telemetry system ibrahimhc@vibratek.com.tr 10/21/01

torsional vibration measurement using telemetry system murali 10/13/01

dc motor current analysis vasanth 10/13/01

Re: dc motor current analysis David Ohren 3/18/05

Re: dc motor current analysis Veera 10/15/01

Basic Question No. 3 Sayed Ali Al-Shurafa ashurafa@hotmail.com 10/12/01

Re: Basic Question No. 3 Malcolm Leader 10/26/01

Re: Basic Question No. 3 Alex J 10/17/01

Re: Basic Question No. 3 Dave Gallagher, www.reliabilitydirect.com 10/13/01

Interesting calculator. However.. Sayed Ali Al-Shurafa 10/14/01

Re: Interesting calculator. However.. Sid B 10/14/01

Gear misalignment Roberto Jimenez 10/12/01

Re: Gear misalignment Veera 10/15/01

Re: Gear misalignment vasanth 10/12/01

How to model hammer strike test for MIL-S-901analytically? tang1@tang.as 10/12/01

Re: How to model hammer strike test for MIL-S-901analytically? 11/27/03

Re: How to model hammer strike test for MIL-S-901analytically? Sid B. 10/12/01

Basic Question No. 1 Sayed Ali Al-Shurafa ashurafa@hotmail.com  10/11/01

Basic Question No. 1 Sayed Ali Al-Shurafa ashurafa@hotmail.com  10/11/01

Re: Basic Question No. 1  10/11/01

Re: Basic Question No. 1 Dave Gallagher, dgallagher@ghg.net 10/11/01

Re: Basic Question No. 1  10/11/01

hp3561a  dynamic analyser marco ievoli (sales@lasit.it) 10/6/01

NDE BEARING HIGH TEMP BONG 10/6/01

Re: NDE BEARING HIGH TEMP Sasaki 10/10/01

NDE / DE BEARING B. Gagnon 6/11/04

Re: NDE BEARING HIGH TEMP Sasaki 10/10/01

COMPRO ANALIZADOR CSI 2115-2117-2120 IGNACIO FRAILE 10/5/01

Re: COMPRO ANALIZADOR CSI 2115-2117-2120 parrahugo@hotmail.com 1/14/05

Research on multi-cylindered engine diagnosis based on crankshaft torsional vibration signals jcwjt2000@yahoo.com.br 10/5/01

Re: Research on multi-cylindered engine diagnosis based on cranks... Rob Mooij - Techno Fysica B.V. - Netherlands 1/29/02

Compresror operation sabu 10/5/01

Re: Compresror operation Sid Booksh 10/6/01

Alloy Balance Weights C.Dostie 10/2/01

Re: Alloy Balance Weights Dave G, dgallagher@ghg.net 10/2/01

Re: Alloy Balance Weights  10/2/01

National Instruments S&V or Third Party Software Matt 10/2/01

Re: National Instruments S&V or Third Party Software Wyndell 1/21/02

Re: National Instruments S&V or Third Party Software Chris Wilcox 10/19/01

Re: National Instruments S&V or Third Party Software Joe T 10/18/01

Re: National Instruments S&V or Third Party Software Joe T. 10/29/01

Re: National Instruments S&V or Third Party Software Malcolm Leader 11/3/01

Re: National Instruments S&V or Third Party Software Malcolm Leader 10/26/01

Re: National Instruments S&V or Third Party Software Donald Nice, JR. 10/2/01

Pump with vibration at VPF William 10/1/01

Re: Pump with vibration at VPF araujogiovanni@hotmail.com 10/5/01

Re: Pump with vibration at VPF Alex J 10/1/01

Pump with vibration at VPF William 10/1/01

Re: Pump with vibration at VPF Sasaki 10/1/01

Re: Pump with vibration at VPF William to Sasaki 10/4/01

Re: Pump with vibration at VPF Sasaki to Williams 10/10/01

Pump with vibration at VPF William 10/1/01

I look for alignment chain B. Rojas spain 9/30/01

Re: I look for alignment chain Dave G; dgallagher@ghg.net 10/1/01

Re: I look for alignment chain J-Marc 10/1/01

Oil Whirl and/or Oil Whip in fluid-film Ali Al-Shurafa: ashurafa@hotmail.com 9/27/01

Re: Oil Whirl and/or Oil Whip in fluid-film Dave G - dgallagher@ghg.net 9/27/01

Re: Oil Whirl and/or Oil Whip in fluid-film Alex J 9/27/01

Rubbing in fluid-film bearing Ali Al-Shurafa: ashurafa@hotmail.com 9/27/01

Low Frequency vibration (1.25Hz) on Turbo Alternator Ian McMillan (DEI) 9/26/01

Re: Low Frequency vibration (1.25Hz) on Turbo Alternator AT 9/3/02

Re: Low Frequency vibration (1.25Hz) on Turbo Alternator Marcel 2/2/02

Re: Low Frequency vibration (1.25Hz) on Turbo Alternator  9/28/01

Re: Low Frequency vibration (1.25Hz) on Turbo Alternator  9/28/01

centrifugal compressor-vibration samuelmk@rediffmail.com 9/26/01

Re: centrifugal compressor-vibration Sid B. 9/26/01

Re: centrifugal compressor-vibration Alex 9/27/01

Re: centrifugal compressor-vibration Sasaki 9/26/01

Re: centrifugal compressor-vibration russ 9/27/01

Re: centrifugal compressor-vibration russ 9/27/01

VFD Current Signatures Sid B. 9/22/01

Re: VFD Current Signatures Phil 1/12/04

Re: VFD Current Signatures Art M. 10/23/01

Machine Tool vibrations gmaha_lingam@hotmail.com 9/21/01

Re: Machine Tool vibrations nmendres@ix.netcom.com 10/1/01

Balancing machine sabu 9/20/01

Re: Balancing machine jclough 9/24/01

Re: Balancing machine Sid B. 9/21/01

Average of de vibration asso@netcoop.com.ar 9/19/01

Re: Average of de vibration C.Dostie 9/20/01

Fan Vibration C.Dostie 9/19/01

Re: Fan Vibration ibrahimhc@vibratek.com.tr 10/21/01

Re: Fan Vibration Sid B. 9/20/01

Re: Fan Vibration C.Dostie 9/21/01

Re: Fan Vibration Sid B. 9/21/01

CSI 4500 G-man 9/17/01

Re: CSI 4500 A.ALZowaid 3/15/04

Re: CSI 4500 G-man 3/22/04

Re: CSI 4500 intowarp@aol.com 2/19/02

PredictDLI DCX G-man 9/14/01

Re: PredictDLI DCX R. Selman 12/28/01

Re: PredictDLI DCX Gman 2/22/02

Axial Fastener Vibration Testing Ryan Kariniemi 9/14/01

Term For Vibration Induced Embrittlement Jim Oldach 9/14/01

Re: Term For Vibration Induced Embrittlement Alan Harper 9/18/01

Re: Term For Vibration Induced Embrittlement Sid B. 9/14/01

Re: Term For Vibration Induced Embrittlement Sasaki 9/16/01

Re: Term For Vibration Induced Embrittlement Sid B. 9/21/01

Re: Term For Vibration Induced Embrittlement Sid B. 9/21/01

Re: Term For Vibration Induced Embrittlement Ron Hartlen 9/14/01

Re: Term For Vibration Induced Embrittlement Sid b 9/15/01

Bearing voltage/currents koencools@yahoo.com 9/11/01

Re: Bearing voltage/currents Sid B 9/13/01

Re: Bearing voltage/currents Veera  A. 9/13/01

Re: Bearing voltage/currents Charlie cs2mh@msn.com 9/12/01

DC motors and SCR freq Shawn Vail 9/10/01

Re: DC motors and SCR freq Steve 9/27/01

Training Analysis II Keith 9/7/01

Yankee # 3 Posting Scott Andrews / Larry Jahsman  9/7/01

Re: Yankee # 3 Posting Alan Mundy. Sandwell Inc.  11/7/01

Re: Yankee # 3 Posting Shawn Vail 10/3/01

Yankee #2 Posting Scott Andrews / Larry Jashman 9/7/01

Re: Yankee #2 Posting Shawn Vail 9/7/01

Re: Yankee #2 Posting Scott Andrews 9/7/01

Re: Yankee #2 Posting Shawn.Vail@Fina.com 9/7/01

Re: Yankee #2 Posting  9/10/01

Re: Yankee #2 Posting Shawn Vail 10/3/01

Yankee Bearing Failures #1 posting Scott Andrews / Larry Jahsman 9/7/01

Gear vibration values at diferent speeds Ing. Javier Rodríguez 9/6/01

Re: Gear vibration values at diferent speeds Shawn Vail 9/7/01

Re: Gear vibration values at diferent speeds Ing. Javier Rodríguez 9/10/01

Re: Gear vibration values at diferent speeds Alex J 9/10/01

vibration of the buss rod stuffing box (beam pump) naamani saeed  9/5/01

Re: vibration of the buss rod stuffing box (beam pump) samon 9/7/01

Vibration spectrum K.soundararajan 9/2/01

Re: Vibration spectrum  9/5/01

Re: Vibration spectrum Sid B. 9/3/01

Re: Vibration spectrum Soundararajan 9/4/01

Electrical induced vibration D. Atkins 9/2/01

Re: Electrical induced vibration electricpete 9/4/01

Re: Electrical induced vibration Sid b. 9/3/01

Re: Electrical induced vibration Sid B 9/3/01

vibration analysers yahya alzafin 9/1/01

Re: vibration analysers ibrahimhc@vibratek.com.tr 10/21/01

Re: vibration analysers Joe Mc Cormack 9/21/01

Re: vibration analysers Arne Lindholm 9/5/01

enve yahya alzafin 9/1/01

vibration analysis of hand-held electronic equipment VIJAY 8/30/01

Worthington Chiller Marianne Deutsch 8/30/01

Half critical in a paper machine roll Terry Tomlinson   lttom@3rddoor.com 8/29/01

Re: Half critical in a paper machine roll Arne Lindholm 9/5/01

Re: Half critical in a paper machine roll ibrahimhc@vibratek.com.tr 8/31/01

Re: Half critical in a paper machine roll Terry Tomlinson 8/31/01

Cylindrical roller bearings R. Babwah 8/29/01

Re: Cylindrical roller bearings Shawn Vail 8/30/01

Re: Cylindrical roller bearings Alex J 8/29/01

Spherical Roller Bearing Break-In W.J.Porter III  8/29/01

Re: Spherical Roller Bearing Break-In Shawn Vail 8/29/01

laser vibration kasok@hotmail.com 8/28/01

Re: laser vibration ibrahimhc@vibratek.com.tr 8/31/01

Re: laser vibration Dave Miller (uk) 8/29/01

Re: laser vibration David Oliver 6/20/02

Pump vibration Sasaki 8/27/01

Re: Pump vibration ibrahimhc@vibratek.com.tr 8/28/01

Re: Pump vibration Alex J 8/28/01

GEAR BOX VIBRATION ANALYSIS BOTTGB1@BP.COM 8/27/01

cocked bearing skm_rao@rediffmail.com 8/27/01

Re: cocked bearing Donald Nice, JR. 8/27/01

Re: cocked bearing electricpete 8/30/01

Re: cocked bearing electricpete 8/30/01

Vibration & noise Measurement/Analysis, Condition Monitoring nvdynamics@rediffmail.com 8/27/01

Pump vibration Lea Jeen  8/25/01

Re: Pump vibration J-Marc 8/28/01

Re: Pump vibration ibrahimhc@vibratek.com.tr 8/27/01

Re: Pump vibration Sid B. 8/26/01

Re: Pump vibration RGF 11/26/01

Multiple harmonics on synchronous motor steve.norris@bhpbilliton.com 8/24/01

Re: Multiple harmonics on synchronous motor ibrahimhc@vibratek.com.tr 8/27/01

Re: Multiple harmonics on synchronous motor john.1.hamilton @gm.com 8/24/01

Cincinnati Vibration Institute Chapter Richard Burton (raburton@ra.rockwell.com) 8/20/01

dynamic balancing at variable electrical frequency of drive. p.k.pal   Email : prokumar@vsnl.in 8/19/01

Re: dynamic balancing at variable electrical frequency of drive. JClough 8/22/01

Re: dynamic balancing at variable electrical frequency of drive. Sid B 8/20/01

Re: dynamic balancing at variable electrical frequency of drive. ibrahimhc@vibratek.com.tr 8/20/01

BALL PASS FRECUENCY CARLO STEVES 8/17/01

Re: BALL PASS FRECUENCY Arne Lindholm 9/5/01

Re: BALL PASS FRECUENCY ibrahimhc@vibratek.com.tr 8/20/01

Re: BALL PASS FRECUENCY Sid B. 8/19/01

Re: BALL PASS FRECUENCY electricpete 8/23/01

Re: BALL PASS FRECUENCY Sid B 8/25/01

Re: BALL PASS FRECUENCY J-Marc 8/28/01

Re: BALL PASS FRECUENCY Sid b 8/29/01

Re: BALL PASS FRECUENCY Sid B. 8/28/01

Motor high vibration sganesaan@hotmail.com 8/15/01

Re: Motor high vibration ibrahimhc@vibratek.com.tr 8/20/01

Re: Motor high vibration  8/16/01

Re: Motor high vibration Richard Burton (raburton@ra.rockwell.com) 8/16/01

Re: Motor high vibration Shawn Vail 8/16/01

Re: Motor high vibration Parsifal.delyon@csd.de 8/16/01

Re: Motor high vibration sganesaan@hotmail.com 8/16/01

Re: Motor high vibration Ian Kinnaird 8/27/01

Level 1 Certification Exam Mike Boutin 8/12/01

Re: Level 1 Certification Exam Donna Denny 8/17/01

Re: Level 1 Certification Exam Mike Boutin 8/17/01

Re: Level 1 Certification Exam Alex J 8/13/01

Re: Level 1 Certification Exam GarryG 8/15/01

Harmonics  and Sidebands vibro@usa.net 8/11/01

Re: Harmonics  and Sidebands Sid Booksh 8/11/01

Installation of Eddy Current Probes Ian Kinnaird 8/8/01

Re: Installation of Eddy Current Probes Steve Schultheis 8/10/01

Re: Installation of Eddy Current Probes Dave G., dgallagher@ghg.net 8/8/01

Re: Installation of Eddy Current Probes Donald Nice, JR. 8/8/01

CSI 1800 Analyzer Krzysztof Kowalski, kowalskikt@wp.pl 7/30/01

Re: CSI 1800 Analyzer Alex J 8/1/01

Vibration measurement on non rotating machinery Krzysztof Kowalski, kowalskikt@wp.pl 7/30/01

Re: Vibration measurement on non rotating machinery Alex J 8/1/01

Re: Vibration measurement on non rotating machinery Alex J  alexjabl@qwestinternet.net 7/31/01

Cost-Benefit Analysis of installing Condition Monitoring (Temp & Vibr) Equipment john.fortin@mwra.state.ma.us 7/27/01

Re: Cost-Benefit Analysis of installing Condition Monitoring (Tem... J-Marc 7/27/01

Sound and Vibration Magazine Galip 7/27/01

Re: Sound and Vibration Magazine rurias@sandia.gov 7/27/01

VIBRATION  STUDY SURESH 7/26/01

Re: VIBRATION  STUDY Sushil Chandra, Senior Manager ( Maintenance), MRPL, Mangalore, India, ( Email : sushilchandra@mrplindia.com) 8/1/01

Re: VIBRATION  STUDY ibrahimhc@vibratek.com.tr 7/28/01

stinger joed@ufl.edu 7/20/01

Aerodynamic Flow-Induced Vibrations Roberto Jimenez 7/20/01

Re: Aerodynamic Flow-Induced Vibrations Pete. 7/25/01

Air Hammer Force Calculation Question c-lash@texas.net 7/20/01

Re: Air Hammer Force Calculation Question ibrahimhc@vibratek.com.tr 7/28/01

Frequency response of complex composites kfields@texascomposite.com 7/20/01

Re: Frequency response of complex composites Tom Irvine, tomirvine@aol.com 7/20/01

Frequency response of complex composites kfields@texascomposite.com 7/20/01

Pneumatic Mounts ( Non-ContinuousAir) jbryant 7/19/01

Re: Pneumatic Mounts ( Non-ContinuousAir) ibrahimhc@vibratek.com.tr 7/28/01

Replacement of BNC 3300 and DDM WCShin 7/18/01

Re: Replacement of BNC 3300 and DDM Parsifal de Lyon 8/6/01

Re: Replacement of BNC 3300 and DDM dgallagher@ghg.net 7/19/01

Requirements won.chul.shin@bchydro.com 7/19/01

Re: Replacement of BNC 3300 and DDM dgallagher@ghg.net 7/19/01

Statistical Data on Rotating Equipment Failures pcoseno@ti.com 7/17/01

Re: Statistical Data on Rotating Equipment Failures David Hansen, LAFE, AOSD Shell Oilsands 8/16/01

Re: Statistical Data on Rotating Equipment Failures Ben Rothrock 7/19/01

Re: Statistical Data on Rotating Equipment Failures pcoseno@ti.com 7/31/01

Bearing information : 6311 / 7309  ADB Galip 7/16/01

Re: Bearing information : 6311 / 7309  ADB 7309 7/30/01

Re: Bearing information : 6311 / 7309  ADB  7/16/01

Fmax  Value Confusion in CSI 2110 Analyzer Galip 7/16/01

Re: Fmax  Value Confusion in CSI 2110 Analyzer Don Lagasse 7/20/01

Re: Fmax  Value Confusion in CSI 2110 Analyzer Galip 7/27/01

Re: Fmax  Value Confusion in CSI 2110 Analyzer ibrahimhc@vibratek.com.tr 7/28/01

Re: Fmax  Value Confusion in CSI 2110 Analyzer ibrahimhc@vibratek.com.tr 7/28/01

ISO 10816 norms for Vertical machines AADHI AGILAN 7/13/01

Re: ISO 10816 norms for Vertical machines MDI-INDIA 7/16/01

ISO 10816 norms for Vertical machines AADHI AGILAN 7/13/01

Contactar con J.Marc J.Pasamar@fagorederlan.es 7/12/01

Linear Bearings Carlo Steves 7/11/01

Predictive maintenance & vibration analysis Mike Fitch 7/11/01

Re: Predictive maintenance & vibration analysis ibrahimhc@vibratek.com.tr 7/28/01

Re: Predictive maintenance & vibration analysis Sid 7/11/01

Re: Predictive maintenance & vibration analysis Shawn Vail 7/17/01

Re: Predictive maintenance & vibration analysis Dave  7/11/01

Resonances in SYNCHRONOUS machine Ing. Javier Rodríguez 7/11/01

Re: Resonances in SYNCHRONOUS machine  7/11/01

Re: Resonances in SYNCHRONOUS machine Ing. Javier Rodríguez 7/12/01

Re: Resonances in SYNCHRONOUS machine  7/13/01

Re: Resonances in SYNCHRONOUS machine ibrahimhc@vibratek.com.tr 7/28/01

Re: Resonances in SYNCHRONOUS machine Ing. Javier Rodríguez 7/16/01

Re: Resonances in SYNCHRONOUS machine ibrahimhc@vibratek.com.tr 7/28/01

Tampa, FL vibration IS TECO's Gannon Power Plant tired, too 7/11/01

Re: Tampa, FL vibration IS TECO's Gannon Power Plant 8/2/03

Lack of lubrication Marco Steves 7/10/01

Re: Lack of lubrication Jim F 7/11/01

DC Motor Vibration Duggie 7/10/01

Re: DC Motor Vibration ibrahimhc@vibratek.com.tr 7/28/01

Re: DC Motor Vibration Richard Burton 7/12/01

Re: DC Motor Vibration Richard Burton 7/12/01

Re: DC Motor Vibration Duggie 7/12/01

Re: DC Motor Vibration Richard Burton 7/13/01

Re: DC Motor Vibration Donald Nice, JR. 7/10/01

Re: DC Motor Vibration Duggie 7/11/01

Gas turbine vibration bearing housing traian41@yahoo.com 7/9/01

Re: Gas turbine vibration bearing housing autokast@satyam.net.in 1/5/03

Re: Gas turbine vibration bearing housing Alex J 7/10/01

Re: Gas turbine vibration bearing housing Sasaki 7/9/01

Pump vibration due to flow ratio K.K. 7/8/01

Re: Pump vibration due to flow ratio tws@somati.be 3/14/02

Re: Pump vibration due to flow ratio Javier Camacho 7/9/01

Re: Pump vibration due to flow ratio Alex J 7/9/01

Re: Pump vibration due to flow ratio  7/9/01

Re: Pump vibration due to flow ratio William 9/25/01

Re: Pump vibration due to flow ratio K.K. 7/10/01

Suspect high vibration due to flow  7/8/01

Condition Monitoring Dr AF Khan 7/7/01

High Axial on electric motor showing up on outer race frequencies Kevin 7/4/01

Re: High Axial on electric motor showing up on outer race frequen... Javier Rodríguez 7/11/01

High axial vane pass vib  on gear reducer Rick Ulrich RUlrich@LCRA.org  7/3/01

Re: High axial vane pass vib  on gear reducer  7/3/01

Re: High axial vane pass vib  on gear reducer Rick Ulrich 7/3/01

Vibracion a 1.26X en motor. J.Pasamar@fagorederlan.es 7/3/01

Re: Vibracion a 1.26X en motor. Javier Camacho 7/6/01

Re: Vibracion a 1.26X en motor.  7/3/01

Re: Vibracion a 1.26X en motor. J.Pasamar@fagorederlan.es 7/4/01

Re: Vibracion a 1.26X en motor.  7/4/01

Gas Turbine Blades. Pete. 7/3/01

Re: Gas Turbine Blades. David Hansen 8/16/01

Re: Gas Turbine Blades. steven.schultheis@equistarchem.com 7/3/01

Re: Gas Turbine Blades.  7/3/01

High Vertical Axis Vibration at 2XRPM artit.keamaratana@th.abb.com 7/2/01

Re: High Vertical Axis Vibration at 2XRPM Alex J 7/3/01

Re: High Vertical Axis Vibration at 2XRPM  7/2/01

High Vertical axis vibration at 2XRPM  7/2/01

High spectra at 2xRPM Vertical axis artit.keamaratana@th.abb.com 7/2/01

Vibration Measurement / Alarm generation - Pumps & discharge and suction lines m_rajendraprasad@hotmail.com 7/2/01

Vibration Analysis Benefits Juan Escobar 6/29/01

GE Turbine monitoring upgrade Rick Ulrich LCRA Rulrich@lcra.org  6/29/01

Re: GE Turbine monitoring upgrade Dave Gallagher, dgallagher@ghg.net 6/29/01

Re: GE Turbine monitoring upgrade Steven.schultheis@equistarchem.com 6/29/01

Re: GE Turbine monitoring upgrade steven.schultheis@equistarchem.com 6/29/01

Acceptable levels of g's lswaim@tielp.com 6/28/01

Re: Acceptable levels of g's norfleet 10/9/01

Re: Acceptable levels of g's Ian Fletcher 6/28/01

Re: Acceptable levels of g's Lesley Swaim 6/28/01

Re: Acceptable levels of g's Mike Fitch 7/11/01

Re: Acceptable levels of g's Ian Fletcher 6/29/01

Re: Acceptable levels of g's Lesley Swaim 6/29/01

Re: Acceptable levels of g's Ian Fletcher 6/29/01

Re: Acceptable levels of g's Shawn Vail 6/29/01

Re: Acceptable levels of g's mark fogarty 2/23/04

Re: Acceptable levels of g's Lesley Swaim 6/29/01

Re: Acceptable levels of g's Shawn Vail 7/9/01

Re: Acceptable levels of g's Lesley Swaim 6/29/01

Re: Acceptable levels of g's  6/29/01

Re: Acceptable levels of g's  6/28/01

Technology Trends - Let us discuss AADHI AGILAN 6/28/01

Re: Technology Trends - Let us discuss J-M Robert 6/28/01

Re: Technology Trends - Let us discuss Sasaki 6/28/01

Excesive vibration from a lube type blower. R. Jimenez 6/27/01

Re: Excesive vibration from a lube type blower. John Kuchler 7/2/01

Re: Excesive vibration from a lube type blower. Giovanni Araujo 6/30/01

Re: Excesive vibration from a lube type blower. G 6/30/01

Random vibration spikes in our Steam Turbine Sushil Chandra, Senior Manager ( Maintenance), Mangalore Refinery & Petrochemicals Ltd, Mangalore, India, ( Email : sushilchandra@mrplindia.com) 6/27/01

Re: Random vibration spikes in our Steam Turbine Sasaki 6/28/01

Re: Random vibration spikes in our Steam Turbine Rup Chaudhuri 6/28/01

Re: Random vibration spikes in our Steam Turbine Javier Camacho 6/27/01

Re: Random vibration spikes in our Steam Turbine Sasaki 6/27/01

Gearbox energy Jnicklay@Ford.com 6/25/01

Re: Gearbox energy Franco 6/25/01

transforms between vibration signals High Sea-Sun 6/24/01

Re: transforms between vibration signals  6/25/01

Spectrum analysis of displacement signal AADHI AGILAN 6/22/01

Re: Spectrum analysis of displacement signal Sid 6/23/01

Re: Spectrum analysis of displacement signal ibrahimhc@vibratek.com.tr 6/23/01

Re: Spectrum analysis of displacement signal Richard Burton 6/26/01

Re: Spectrum analysis of displacement signal Ron Hartlen 6/23/01

Re: Spectrum analysis of displacement signal dgallagher@ghg.net 6/25/01

Re: Spectrum analysis of displacement signal MTS 6/26/01

Re: Spectrum analysis of displacement signal Ron Hartlen 6/26/01

Engine vibration that transfers to chasiss and it's effect on performance Richard E-Zade 6/22/01

Re: Engine vibration that transfers to chasiss and it's effect on... Richard E-Zade 8/3/01

High frequency vibe on pump motor with VFD Bill @ vibesrus@aol.com 6/22/01

Re: High frequency vibe on pump motor with VFD mh 6/29/01

Re: High frequency vibe on pump motor with VFD ibrahimhc@vibratek.com.tr 6/23/01

Re: High frequency vibe on pump motor with VFD Bill 7/20/01

settling pond colton@presys.com 6/20/01

FLUID COUPLING VIBRATION Angelo Gentile:  angelo_gentile@toraytpa.com 6/19/01

Re: FLUID COUPLING VIBRATION  6/19/01

Article 1575 araujogiovanni@hotmail.com  6/18/01

Terminology rnorton@tucsonelectric.com 6/14/01

Re: Terminology C. Hunter Cloud (CHC5E@Virginia.Edu) 6/15/01

Elliott Air Compressor Foxman 6/14/01

Tension Wire Modal Testing Dave Miller (uk) 6/13/01

Balance Rings rirayme@wcnoc.com 6/13/01

Re: Balance Rings Malcolm Leader 10/26/01

Generator Vibration takashirokeiji@altavista.com 6/12/01

Re: Generator Vibration ibrahimhc@vibratek.com.tr 6/23/01

sub-harmonics Shurafa, A. 6/9/01

Re: sub-harmonics vasanth 6/22/01

Motor Vibration gurski.rick@syncrude.com 6/8/01

Re: Motor Vibration Alex J 6/11/01

Re: Motor Vibration Sid 6/8/01

Calibration of Vibration Analysis Equipment Eddie 6/8/01

Re: Calibration of Vibration Analysis Equipment Trimetric Engineering 2/2/05

Re: Calibration of Vibration Analysis Equipment Calibration Made Easy Inc. 2/3/04

120 HZ. 2X LINE FREQ.?? T.TROW 6/7/01

Re: 120 HZ. 2X LINE FREQ.?? jbryant 6/8/01

Re: 120 HZ. 2X LINE FREQ.?? J-Marc 6/7/01

cooling tower vibration pin_ka@hotmail.com 6/6/01

Re: cooling tower vibration Dale Hagler Chiller Services, Inc  10/22/01

Re: cooling tower vibration Rup (rupchaudhuri@hotmail.com) 6/14/01

Re: cooling tower vibration jim powers 6/11/01

Re: cooling tower vibration Pin 6/12/01

Re: cooling tower vibration Dave Gallagher 6/7/01

Re: cooling tower vibration Pin 6/7/01

Gear Definition: Assembly Phase jlreeves@firstenergycorp.com 6/6/01

Re: Gear Definition: Assembly Phase danny@primac.net 7/13/01

Re: Gear Definition: Assembly Phase Dave Gallagher, dgallagher@ghg.net 6/7/01

Rotor Perturbation Test Sid Booksh (mts.ak@att.net) 6/6/01

Re: Rotor Perturbation Test Art M. 10/23/01

Re: Rotor Perturbation Test C. Hunter Cloud 6/6/01

Brush Seals-experience with Andy Conkey(apconkey@tamu.edu) 6/6/01

Re: Brush Seals-experience with Joe Collins 12/13/01

Knowing unbalance mass ajay_sg1111@hotmail.com 6/5/01

Re: Knowing unbalance mass Terry  Tomlilnson  7/22/01

Re: Knowing unbalance mass Terry  7/4/01

Re: Knowing unbalance mass William C. Foiles 6/7/01

Re: Knowing unbalance mass jclough 6/6/01

Re: Knowing unbalance mass Alex J 6/6/01

Re: Knowing unbalance mass Joy.P.F, Equate 6/5/01

Motor Rotor Bars J-M Robert 6/4/01

Re: Motor Rotor Bars  6/4/01

Journal bearing failures pengjukang@hotmail.com 6/1/01

Re: Journal bearing failures Sasaki 6/4/01

Re: Journal bearing failures Dave Gallagher 6/4/01

Re: Journal bearing failures pengjukang@hotmail.com 6/7/01

Re: Journal bearing failures Dave Gallagher 6/7/01

Re: Journal bearing failures Lim.Tze-Min@cognis.com 5/31/04

Re: Journal bearing failures ahmed.safwat@cemex. com 6/16/02

Re: Journal bearing failures Pin 6/8/01

Unusual Dry Coupling Failure/Turbine Damage Franco 6/1/01

Re: Unusual Dry Coupling Failure/Turbine Damage Sasaki 6/3/01

Re: Unusual Dry Coupling Failure/Turbine Damage Sid 6/1/01

Amplitude Value Xingm 6/1/01

Re: Amplitude Value Sasaki 6/1/01

Phase Readings Don Lagasse 5/31/01

Re: Phase Readings debashis_b123@rediffmail.com 6/1/01

Re: Phase Readings Dave Gallagher, dgallagher@ghg.net 5/31/01

Re: Phase Readings dgallagher@ghg.net 5/31/01

Re: Phase Readings Sasaki 5/31/01

plotting a graph janak 5/31/01

Re: plotting a graph WCFoiles 5/31/01

Root cause location of noise caused by metal rubbing matharu@hotmail.com 5/30/01

Re: Root cause location of noise caused by metal rubbing Donald Nice, JR. 5/31/01

Re: Root cause location of noise caused by metal rubbing Ron Hartlen 5/30/01

Re: Root cause location of noise caused by metal rubbing Sasaki 5/30/01

Signs of Roller Bearing Faults Kyoto 5/30/01

Re: Signs of Roller Bearing Faults David Stevens IEng F.I.diag.E 8/28/01

Re: Signs of Roller Bearing Faults Sasaki 5/30/01

Re: Signs of Roller Bearing Faults Sid 5/30/01

Re: Signs of Roller Bearing Faults J-M Robert 5/30/01

Re: Signs of Roller Bearing Faults Kyoto 5/31/01

Re: Signs of Roller Bearing Faults Dave Gallagher, dgallagher@ghg.net 5/31/01

Re: Signs of Roller Bearing Faults Alex J 5/31/01

Re: Signs of Roller Bearing Faults Kyoto 5/31/01

Re: Signs of Roller Bearing Faults J-Marc 5/31/01

Rotary Screw Compressors Dave Leach 5/29/01

Re: Rotary Screw Compressors Yogan Sathianathan 6/21/01

Plots for various values of spring constant 'K' janakraguraman@usa.net 5/29/01

Re: Plots for various values of spring constant 'K' UTK Grad 5/29/01

Still having problems with the graph!! janakraguraman 5/30/01

blade pass frequency diagnosis meng hee lim 5/27/01

FAN VIBRATION TTROW 5/25/01

Re: FAN VIBRATION ibrahimhc@vibratek.com.tr 6/23/01

Re: FAN VIBRATION jbryant 5/30/01

Re: FAN VIBRATION J-M Robert 5/29/01

Re: FAN VIBRATION Donald Nice, JR 5/25/01

Re: FAN VIBRATION Shawn Vail 5/26/01

Broken Rotor Bars larry.hajarysingh@mirant.com 5/24/01

Re: Broken Rotor Bars haris darmawan 7/21/01

Re: Broken Rotor Bars haris darmawan 7/21/01

Re: Broken Rotor Bars  7/21/01

Re: Broken Rotor Bars Sasaki 5/24/01

Re: Broken Rotor Bars Charlie 5/26/01

Re: Broken Rotor Bars Sasaki 5/28/01

Re: Broken Rotor Bars electricpete 9/20/01

Re: Broken Rotor Bars electricpete 9/20/01

Re: Broken Rotor Bars Charlie 5/29/01

CSI 2120 Analyzer Pricing rst@stetzerelectric.com 5/23/01

Re: CSI 2120 Analyzer Pricing rst@stetzerelectric.com 5/25/01

Re: CSI 2120 Analyzer Pricing ramiro_on_the_road@yahoo.com 5/25/01

'Wet'  and 'Dry' Resonance ajay_sg1111@hotmail.com 5/23/01

Re: 'Wet'  and 'Dry' Resonance Sid 5/24/01

Acceleration units Paul 5/23/01

Re: Acceleration units Richard Burton 5/23/01

Re: Acceleration units Ron Hartlen 5/23/01

Fourdrinier Vibration C.Dostie 5/21/01

Re: Fourdrinier Vibration Mr A Jensen  9/12/01

Re: Fourdrinier Vibration Don Lagasse 5/22/01

Re: Fourdrinier Vibration D.Porter 5/22/01

IRD-What does it mean. Keith 5/20/01

Re: IRD-What does it mean. Charles Hart 10/25/01

Re: IRD-What does it mean. Stan Riddle 5/23/01

Re: IRD-What does it mean. Dave Gallagher 5/21/01

Re: IRD-What does it mean. Sid 5/20/01

Re: IRD-What does it mean. Ed Gibson 12/3/01

CSI 2100 manual dhall@me.umn.edu 5/18/01

Re: CSI 2100 manual chad.chichester@dowcorning.com 9/27/01

Re: CSI 2100 manual chad.chichester@dowcorning.com 9/27/01

Multiplane Balancing skat@flask.com 5/16/01

Re: Multiplane Balancing Joy.P.F, Equate 5/21/01

Re: Multiplane Balancing franko 5/21/01

Re: Multiplane Balancing jclough 5/17/01

Re: Multiplane Balancing  5/17/01

Connecting an Utraprobe to a 2120 D. Stiteler 5/16/01

Re: Connecting an Utraprobe to a 2120 Ron, RMGC, Nevada 5/29/01

pre-owned accelerometer wanted michael wong 5/14/01

Re: pre-owned accelerometer wanted Dave Gallagher, dgallagher@ghg.net 5/15/01

Re: pre-owned accelerometer wanted Alex J 5/14/01

Gas Turbine Generator Vibration galt@163.net 5/12/01

Re: Gas Turbine Generator Vibration naeim_5@hotmail.com 3/1/05

Re: Gas Turbine Generator Vibration ibrahimhc@vibratek.com.tr 6/23/01

Re: Gas Turbine Generator Vibration Alex J 5/14/01

Re: Gas Turbine Generator Vibration Sid Booksh (mts.ak@att.net) 5/13/01

Bearing Data skm_rao@rediffmail.com 5/11/01

Re: Bearing Data J-M Robert 5/29/01

Re: Bearing Data Dave Gallagher, dgallagher@ghg.net 5/11/01

Re: Bearing Data Sid Booksh 5/11/01

Looking for UT Ultraprobe 2000 graphic recorder and printer Frederico A Rocha Almeida / Pernambuco-BRAZIL 5/11/01

IRD model 306 rfox57@netscape.net 5/10/01

Energy savings from balancing centrifugal fan Bob Curd 5/10/01

Re: Energy savings from balancing centrifugal fan Sid Booksh 5/11/01

Re: Energy savings from balancing centrifugal fan Sid Booksh 5/10/01

Re: Energy savings from balancing centrifugal fan Bob Curd 5/13/01

Re: Energy savings from balancing centrifugal fan Sid Booksh, Anchorage, AK 5/14/01

4 pole 50hZ 40 KW ELECT MOTOR VIBRATION PROBLEM ANDREW.CHARLETT@HEALTH.WA.GOV.AU 5/10/01

Re: 4 pole 50hZ 40 KW ELECT MOTOR VIBRATION PROBLEM electricpete 5/17/01

Alarm Limit setting David Terro 5/9/01

Re: Alarm Limit setting CSI User 5/9/01

Re: Alarm Limit setting CSI User 5/9/01

VIBRATION FAILURE ANALASYS PDM DEPT. @GFPI 5/8/01

Re: VIBRATION FAILURE ANALASYS Dave Gallagher, dgallagher@ghg.net 5/9/01

Reflective Tape Foxman 5/8/01

Re: Reflective Tape Malcolm Leader 10/26/01

Re: Reflective Tape ibrahimhc@vibratek.com.tr 6/23/01

Re: Reflective Tape TOM.HALL@FTSCLANT.NAVY.MIL 5/16/01

Re: Reflective Tape Steve Schultheis 5/9/01

Re: Reflective Tape Sasaki 5/8/01

Re: Reflective Tape Dave Miller (uk) 5/8/01

Discusion en español pesave@hotmail.com 5/8/01

Re: Discusion en español Manel 5/24/01

Re: Discusion en español  1/12/02

Re: Discusion en español Robert Vilardebo 5/8/01

Detection of the presence of washer in motor Tony Simon 5/8/01

Re: Detection of the presence of washer in motor Shawn Vail 5/8/01

slow speed  5/7/01

Re: slow speed  5/8/01

Impeller Balancing C. Dostie 5/7/01

Re: Impeller Balancing Syed Ibrahim 5/13/01

Re: Impeller Balancing Sid Booksh 5/7/01

Re: Impeller Balancing Bob Vilardebo engineering@vibra-analysis.com 5/7/01

Re: Impeller Balancing Shawn Vail 5/7/01

Does anyone notice the Tampa, FL  (Port Sutton) vibration? tired_resident 5/6/01

Re: Does anyone notice the Tampa, FL  (Port Sutton) vibration? Bob - Tampa resident 5/6/01

Re: Does anyone notice the Tampa, FL  (Port Sutton) vibration? tired_resident 5/21/01

Rel-Engr-Job Description Thomas Purackal<thomas_purackal@pic.com.kw> 5/5/01

Re: Rel-Engr-Job Description  5/7/01

Re: Rel-Engr-Job Description Thomas Purackal<thomas_purackal@pic.com.kw> 5/7/01

INFORMACION SOBRE ISO 4866 MANUEL VARGAS  mavagal@hotmail.com 5/3/01

Re: INFORMACION SOBRE ISO 4866 10/20/04

Cantiliver Fans Balancing Juan Escobar  5/3/01

Re: Cantiliver Fans Balancing Giovanni Araujo 6/30/01

Re: Cantiliver Fans Balancing Sid Booksh (mts.ak@att.net) 5/4/01

GEAR BOX VIBRATION ANALYSIS BOTTGB1@BP.COM 4/30/01

Re: GEAR BOX VIBRATION ANALYSIS GBOTT1@BP.COM 8/27/01

Re: GEAR BOX VIBRATION ANALYSIS Donald Nice, JR 5/1/01

Resonance Question? gary.banks@hscpoly.com 4/30/01

Re: Resonance Question? JDS 4/30/01

NON SINCRONOUS VIBRATION centenoj_ve@yahoo.com 4/27/01

Re: NON SYNCRONOUS VIBRATION Roberto 5/7/01

Re: NON SINCRONOUS VIBRATION josephmccormack@hotmail.com 5/1/01

Re: NON SINCRONOUS VIBRATION gary.banks@hscpoly.com 5/1/01

Re: NON SINCRONOUS VIBRATION Shawn Vail 4/30/01

Vibration Consultant in Boston Area jtpiskorowski@lilly.com 4/25/01

Re: Vibration Consultant in Boston Area jclough 5/16/01

Re: Vibration Consultant in Boston Area w_f_strong@msn.com 5/2/01

Re: Vibration Consultant in Boston Area Dave Gallagher, dgallagher@ghg.net 4/27/01

Re: Vibration Consultant in Boston Area Donald Nice, JR.  4/25/01

Antifriction Bearing Details skm_rao@rediffmail.com 4/24/01

Re: Antifriction Bearing Details ahmeddokki@quios.com 5/8/01

Re: Antifriction Bearing Details Alex J 4/24/01

Converting inches of amplitude to Gs Dan H 4/23/01

Re: Converting inches of amplitude to Gs  7/23/01

Re: Converting inches of amplitude to Gs J-M Robert 5/29/01

Re: Converting inches of amplitude to Gs Tom Irvine, tomirvine@aol.com 4/23/01

Re: Converting inches of amplitude to Gs electricpete 4/30/01

Re: Converting inches of amplitude to Gs Franko 4/23/01

Need help with Crankshaft AlexAER 4/21/01

Article 1822  8/29/01

Re: Need help with Crankshaft  8/16/01

Bearings and Rigid Coupling ELA 4/17/01

Re: Bearings and Rigid Coupling Sasaki 5/2/01

Re: Bearings and Rigid Coupling Alex J 4/17/01

Re: Bearings and Rigid Coupling Wayne Prescod 4/29/01

Vibracion en  Ventilador Pedro Sanchez   pesave@hotmail.com 4/12/01

Re: Vibracion en  Ventilador tqmser@telnor.net 5/16/04

Re: Vibracion en  Ventilador Roberto Vilardebo - www.engineering@vibra-analysis.com 5/7/01

Re: Vibracion en  Ventilador Javier Camacho 5/6/01

Calculating The fmax and the number of lines to use. Keith 4/12/01

Re: Calculating The fmax and the number of lines to use. Byron Martin 5/22/01

Re: Calculating The fmax and the number of lines to use. ahmeddokki@quios.com 4/14/01

Re: Calculating The fmax and the number of lines to use. Tom Irvine, tomirvine@aol.com 4/12/01

Passage of Electric Current through the Bearing Roberto Jimenez 4/11/01

Re: Passage of Electric Current through the Bearing David Stevens IEng F.I.Diag.E 8/28/01

Re: Passage of Electric Current through the Bearing C. Dostie 5/7/01

Re: Passage of Electric Current through the Bearing david.felker@gapac.com 4/24/01

Re: Passage of Electric Current through the Bearing CHARLIE 4/19/01

Re: Passage of Electric Current through the Bearing Kenneth.rankin.b@bayer.com 4/13/01

Re: Passage of Electric Current through the Bearing C. Hunter Cloud 4/12/01

Re: Passage of Electric Current through the Bearing James Ketchum 4/11/01

Re: Passage of Electric Current through the Bearing rurias@sandia.gov 4/11/01

2-plane trim balancing cywong@singnet.com.sg 4/10/01

Re: 2-plane trim balancing ahmeddokki@quios.com 4/19/01

Re: 2-plane trim balancing Sid 4/10/01

Re: 2-plane trim balancing cywong@singnet.com.sg 4/10/01

Re: 2-plane trim balancing Sid 4/12/01

Vibration Test Stands Eddie 4/9/01

Waveform Information Dennis 4/9/01

Re: Waveform Information Sid 4/9/01

vibration & oscillation mechanical Eng. student 4/9/01

Re: vibration & oscillation Ron Hartlen 4/10/01

Re: vibration & oscillation ibrahimhc@vibratek.com.tr 4/9/01

Re: vibration & oscillation  4/9/01

Squared shaped orbit plot Samuel 4/6/01

Re: Squared shaped orbit plot trb 4/23/02

Re: Squared shaped orbit plot R.A. Shannon 8/7/01

Re: Squared shaped orbit plot Steve Schultheis 4/9/01

Re: Squared shaped orbit plot ibrahimhc@vibratek.com.tr 4/6/01

multi dof test spec help Rick Baird 4/5/01

Re: multi dof test spec help ibrahimhc@vibratek.com.tr 4/6/01

Re: multi dof test spec help Donald Nice, JR. 4/5/01

MANEL SANTIAGO msantiago@uniland.es 4/5/01

Re: MANEL SANTIAGO Ignacio Jimenez 5/11/02

Re: MANEL SANTIAGO pesave@hotmail.com 4/12/01

Re: MANEL SANTIAGO Pilqui 4/7/01

Vibration from blasting barutsan@barutsan.com.tr 4/5/01

Vibration benedetti@abase.com.br 4/4/01

Re: Vibration ibrahimhc@vibratek.com.tr 4/5/01

Re: Vibration  2/16/02

Bearing fluting Drhoda@aol.com 4/4/01

Re: Bearing fluting Abdullah 9/9/04

Re: Bearing fluting Dave s 4/11/01

Re: Bearing fluting rurias 4/10/01

Re: Bearing fluting rurias@sandia.com 4/10/01

Re: Bearing fluting electricpete 4/4/01

Re: Bearing fluting Shawn Vail 4/6/01

screw compressor with high vibration at 4X (frick) Pilqui 4/4/01

Re: screw compressor with high vibration at 4X (frick) RCSSHOP 8/7/01

Re: screw compressor with high vibration at 4X (frick) Richard Burton  raburton@ra.rockwell.com 4/6/01

Re: screw compressor with high vibration at 4X (frick) Pilqui 4/7/01

Re: screw compressor with high vibration at 4X (frick) Donald Nice, JR. 4/5/01

Re: screw compressor with high vibration at 4X (frick) Benedetti J.B> 4/5/01

Integration between vibration analysis & oil analysis Eng./ Mohamed Shahtout (Condition Monitoring Engineer - Alexandria National Iron&Steel Company) 4/4/01

Supersynchronous Multiples fkushner@elliott-turbo.com 4/4/01

Re: Supersynchronous Multiples Joe Mc Cormack 4/4/01

detecting insect movements sjtaylor@inhs.uiuc.edu 4/3/01

Re: detecting insect movements ibrahimhc@vibratek.com.tr 4/5/01

HIgher Studies in Rotor Dynamics ajay_sg1111@hotmail.com 4/1/01

Re: HIgher Studies in Rotor Dynamics C. Hunter Cloud 4/2/01

Re: HIgher Studies in Rotor Dynamics Steve Schultheis 4/2/01

Re: HIgher Studies in Rotor Dynamics Malcolm Leader 4/27/01

Bearing faults DRhoda@aol.com 3/30/01

Re: Bearing faults James Fowler 1/23/05

Re: Bearing faults Dan Gagne 3/31/01

Re: Bearing faults Allen Plymon 3/31/01

Re: Bearing faults raburton@ra.rockwell.com 4/2/01

Re: Bearing faults dr.becker@flender-cm.de 3/31/01

Dactron Photon Dynamic Signal Analyzer Joe Keckeisen 3/30/01

Re: Dactron Photon Dynamic Signal Analyzer Ed Gibson 8/19/04

Re: Dactron Photon Dynamic Signal Analyzer Ed Gibson 12/3/01

Re: Dactron Photon Dynamic Signal Analyzer Sami Grönstrand 6/26/01

Continuous caster bearings mtrstenjak@acroni.si 3/30/01

Re: Continuous caster bearings raburton@ra.rockwell.com 4/2/01

Accelerometers vs. Velocity meters adbutler       adbutler@my.reliabilityweb.com 3/29/01

Re: Accelerometers vs. Velocity meters  4/5/01

Re: Accelerometers vs. Velocity meters dr.becker@flender-cm.de 3/31/01

Re: Accelerometers vs. Velocity meters Dave Gallagher, dgallagher@ghg.net 3/30/01

Optimum Accelerometer Mounting ramin100@hotmail.com 3/29/01

Re: Optimum Accelerometer Mounting todd.dahling@manta-oh.com 3/30/01

Re: Optimum Accelerometer Mounting Ron Hartlen 3/30/01

Re: Optimum Accelerometer Mounting Dave Miller (uk) 3/30/01

Re: Optimum Accelerometer Mounting Sid 3/30/01

Re: Optimum Accelerometer Mounting Ron Hartlen 3/29/01

Re: Optimum Accelerometer Mounting Dave Gallagher 3/29/01

HORIZONAL PUMP MOTOR VIBS TOM584 pworthi@vicksburg.com 3/28/01

Re: HORIZONAL PUMP MOTOR VIBS: Followup Tom584 4/18/01

Re: HORIZONAL PUMP MOTOR VIBS pilqui 4/7/01

Re: HORIZONAL PUMP MOTOR VIBS Marcelo Salloumm (salloumm@bb.astra.com.ar) 3/29/01

Re: HORIZONAL PUMP MOTOR VIBS Marcelo Salloumm (salloumm@bb.astra.com.ar) 3/29/01

Re: HORIZONAL PUMP MOTOR VIBS electricpete 3/28/01

Gearbox Failure mhieatt@btinternet.com 3/27/01

Re: Gearbox Failure Andrew Tooke 5/16/01

Re: Gearbox Failure Andrew Tooke 5/16/01

Re: Gearbox Failure Andrew Tooke 5/16/01

Re: Gearbox Failure ibrahimhc@vibratek.com.tr 4/6/01

Re: Gearbox Failure dr.becker@flender-cm.de 3/31/01

Re: Gearbox Failure Marcelo Salloum (salloumm@bb.astra.com.ar) 3/28/01

Re: Gearbox Failure ahmeddokki@quios.com 3/27/01

Mechanical Seal Sasaki 3/25/01

Re: Mechanical Seal James Routh 4/17/01

Re: Mechanical Seal Alex J 3/27/01

Re: Mechanical Seal Sid Booksh 3/26/01

Re: Mechanical Seal Charlie 3/26/01

Slotted cut-offs for reducing fan noise egibson@tltbabcock.com 3/20/01

Vibration from Wahing Machines in a multi dwelling building annoyed by vibraton :-( 3/18/01

Re: Vibration from Wahing Machines in a multi dwelling building ibrahimhc@vibratek.com.tr 4/5/01

Re: Vibration from Wahing Machines in a multi dwelling building Scott Alvey, alveysa@nnsy.navy.mil 3/28/01

Re: Vibration from Wahing Machines in a multi dwelling building Steve Schultheis 3/27/01

Re: Vibration from Wahing Machines in a multi dwelling building Marcelo Salloum (salloumm@bb.astra.com.ar) 3/20/01

Re: Vibration from Wahing Machines in a multi dwelling building Sid Booksh 3/20/01

Off-Road Vehicle Suspension Analysis pf@osite.com.br 3/15/01

DasyLab idiosyncracy Sid Booksh 3/15/01

Re: DasyLab idiosyncracy cj 4/12/01

Off-Road Suspension Vibration pf@osite.com.br 3/14/01

Re: Off-Road Suspension Vibration Rich Pratt 3/15/01

Re: Off-Road Suspension Vibration pf@osite.com.br 3/15/01

high pitch noise in 4 pole induction motors andrew.charlett@health.wa.gov.au 3/14/01

Re: high pitch noise in 4 pole induction motors kverspoor 3/22/01

Re: high pitch noise in 4 pole induction motors viblee@kps.co.kr 3/15/01

Re: high pitch noise in 4 pole induction motors electricpete 3/14/01

vibration on impeller computer program Ferry Purba 3/13/01

350 hp vertical motor vibrations siniaver@netvision.net.il 3/13/01

Re: 350 hp vertical motor vibrations viblee@netian.co.kr 3/15/01

Re: 350 hp vertical motor vibrations Sid Booksh 3/13/01

Re: 350 hp vertical motor vibrations electricpete 3/15/01

Turbine Casing Measurements cbris@aol.com 3/12/01

Re: Turbine Casing Measurements Dave Gallagher 3/13/01

Vibration Analysis Help B.J. Hughes 3/12/01

Re: Vibration Analysis Help  6/26/01

Re: Vibration Analysis Help Donald Nice, JR. 3/12/01

ELECTRIC INDUCTION MOTORS ANDREW.CHARLETT@HEALTH.WA.GOV.AU 3/12/01

Re: ELECTRIC INDUCTION MOTORS Phil Scott 3/12/01

Re: ELECTRIC INDUCTION MOTORS electricpete 3/12/01

Bearings?? college kid 3/8/01

Re: Bearings?? Sid Booksh (mts.ak@att.net) 3/8/01

vibration consultant ahmeddokki@quios.com 3/8/01

Re: vibration consultant ibrahimhc@vibratek.com.tr 4/6/01

4000 HP AC Motor C. Dostie 3/7/01

Re: 4000 HP AC Motor rob mooij - techno fysica BV netherlands 1/29/02

Re: 4000 HP AC Motor Dave Riggenbach @ Ideal Electric 3/13/01

Re: 4000 HP AC Motor greg_klein@huntsman.com 3/8/01

Re: 4000 HP AC Motor vasanth 3/7/01

Re: 4000 HP AC Motor electricpete 3/7/01

Re: 4000 HP AC Motor vasanth  3/8/01

Re: 4000 HP AC Motor electricpete 3/12/01

vibration calculations Mike B. 3/7/01

Re: vibration calculations Tom Irvine, tomirvine@aol.com 3/7/01

Publications on excessive belt tension rst@stetzerelectric.com 3/5/01

Re: Publications on excessive belt tension Dave Gallagher 3/7/01

Re: Publications on excessive belt tension Duane Dobson 3/9/01

vibration levels of lobe type blowers karthik 3/2/01

Re: vibration levels of lobe type blowers Jim Powers 3/10/01

Re: vibration levels of lobe type blowers vasanth  3/7/01

Re: vibration levels of lobe type blowers Alex J 3/6/01

Re: vibration levels of lobe type blowers Dragon 3/6/01

Vibration and historic 170 year old farmhouse Rich 2/28/01

Re: Vibration and historic 170 year old farmhouse Tom Irvine, tomirvine@aol.com 3/2/01

Re: Vibration and historic 170 year old farmhouse John.f.kuchler@jci.com 3/1/01

Diesel Generator Vibration levels Mike 2/28/01

Re: Diesel Generator Vibration levels 9/29/03

Re: Diesel Generator Vibration levels ahmeddokki@quios.com 3/9/01

Seeking Reliability Engineer vibsnd@singnet.com.sg 2/27/01

Hand held sound and vibration analyzer joe francis 2/27/01

Re: Hand held sound and vibration analyzer  5/17/01

Acoustics Emission measurement Danny Tang 2/25/01

Re: Acoustics Emission measurement Sid Booksh 2/25/01

Vibration analyzer  review/comparison sites joe francis 2/25/01

Re: Vibration analyzer  review/comparison sites Mike Barnett 2/26/01

Bearing vibration due to lubricant contamination Adam Gryl 2/25/01

On-line Mentoring system salamala@aramco.com.sa 2/23/01

Re: On-line Mentoring system danny@primac.net 7/13/01

Re: On-line Mentoring system ahmeddokki@quios.com 3/12/01

Help save my Computers from Vibration Dave Jarvis 2/22/01

Re: Help save my Computers from Vibration Sid Booksh (mts.ak@att.net) 2/22/01

Re: Help save my Computers from Vibration Alias 2/22/01

Vibration Measurement daniel.salvatore@baesystems.com 2/21/01

Re: Vibration Measurement Tom Irvine, tomirvine@aol.com 2/23/01

ppv bks@pelgel.com 2/21/01

frequency bks@pjelgel.com 2/20/01

Re: frequency Sid Booksh 2/21/01

Automotive Shaft Vibrations Tim Grossen 2/20/01

Re: Automotive Shaft Vibrations mhieatt@btinternet.com 3/27/01

Re: Automotive Shaft Vibrations Dnicejr 2/20/01

Need advice on residential vibration m_vita@yahoo.com 2/20/01

Re: Need advice on residential vibration  2/26/01

Re: Need advice on residential vibration  2/20/01

PIPE VIBRATIONS lbloom@fbm.hs-bremen.de 2/19/01

Wanted IRD fastrack software and probe cable Drew -> dperegrim@pridehealth.com 2/19/01

Re: Wanted IRD fastrack software and probe cable Amalco_2001@yahoo.com 2/22/01

Re: Wanted IRD fastrack software and probe cable 6/30/04

Another residential vibration problem m_vita@yahoo.com 2/18/01

Re: Another residential vibration problem  2/19/01

Re: Another residential vibration problem m_vita@yahoo.com 2/19/01

Re: Another residential vibration problem jclough 2/20/01

Rotordynamics Instability khalid172@hotmail.com 2/17/01

Re: Rotordynamics Instability Malcolm Leader 4/27/01

Acceleration limits dr.becker@flender-cm.de 2/17/01

Re: Acceleration limits Sid Booksh (mts.ak@att.net) 2/17/01

DAMPING FACTOR OF ALUMINUM N. D. TRAN 2/16/01

coupled vibration ****  urgent*** please help bijun@cusat.ac.in 2/16/01

coupled vibration bijun@cusat.ac.in 2/16/01

Looking for Dynamic (Tuned) Absorber Kits jhuff6@ford.com 2/15/01

Fiber optics heerkens@hetnet.nl 2/15/01

Riley Pulverizers  2/14/01

Compact self powered Vibration sensors Naveen Kolli 2/14/01

Re: Compact self powered Vibration sensors dons@jumpgate.net 1/16/03

Increased amplitude in permanent probe and decreased amplitude in portable analyzer Monday 2/13/01

Re: Increased amplitude in permanent probe and decreased amplitud... Shawn 2/15/01

Re: Increased amplitude in permanent probe and decreased ampl... Shawn 2/15/01

Re: Increased amplitude in permanent probe and decreased amplitud... ramiro_on_the_road@yahoo.com 2/15/01

Increased amplitude in permanent probe and decreased amplitude in portable analyzer Monday 2/13/01

Re: Increased amplitude in permanent probe and decreased amplitud... Joy.P.F, Equate 2/15/01

Bently Nevada vibration parts Tm Mack 2/13/01

Re: Bently Nevada vibration parts parsifal.delyon@csd.de 4/2/01

Re: Bently Nevada vibration parts George English 2/25/01

Safety Of Portable Vibration Data Collection Phil Scott 2/11/01

Re: Safety Of Portable Vibration Data Collection Tom Irvine 2/12/01

Onlinesystem for Gearbox monitoring dr.becker@flender-cm.de 2/11/01

Damping the vibration salamala@aramco.com.sa 2/10/01

Re: Damping the vibration electricpete 2/27/01

Vibration modeling Leith 2/8/01

Re: Vibration modeling Ron Hartlen 2/10/01

Re: Vibration modeling Malcolm Leader 2/9/01

Axial flow pumps John Smith 2/8/01

Re: Axial flow pumps juanebustamante@aol.com 6/29/01

Re: Axial flow pumps Arne Lindholm, arnelind/spam/@algonet.se 2/13/01

Inner Race Spinning on Shaft C.Dostie 2/8/01

Re: Inner Race Spinning on Shaft jbryant 5/3/01

Re: Inner Race Spinning on Shaft Joe McCormack 2/11/01

Re: Inner Race Spinning on Shaft Shawn Vail 2/8/01

Re: Inner Race Spinning on Shaft C. Dostie 2/20/01

Re: Inner Race Spinning on Shaft Shawn Vail 3/1/01

Re: Inner Race Spinning on Shaft Dave Gallagher 2/8/01

Re: Inner Race Spinning on Shaft Dave Gallagher` 2/8/01

Re: Inner Race Spinning on Shaft michael.mys@gm.com 12/18/02

Re: Inner Race Spinning on Shaft dragan@bearingtrans.com 2/8/01

Vibration, accleration measurements Ian McMillan 2/8/01

Re: Vibration, accleration measurements Tom Irvine, tomirvine@aol.com 2/8/01

Boiler Feedwater Pump Vibrations Fulzer 2/8/01

Re: Boiler Feedwater Pump Vibrations Alex J 2/8/01

vibration diagnosis swx 2/6/01

Re: vibration diagnosis Alan Friedman 5/17/01

Shaker Table Clive Silva - leacm001@students.unisa.edu.au 2/6/01

WANTED Portable balancer nlcbalac@powerup.com.au 2/5/01

Re: WANTED Portable balancer carlos_510@yahoo.com 3/20/01

Re: WANTED Portable balancer Dave Gallagher 2/6/01

Industrial Motor Vibration Monitoring Market Size Will Davies 2/5/01

Re: Industrial Motor Vibration Monitoring Market Size Donald Nice, JR. 4/5/01

Re: Industrial Motor Vibration Monitoring Market Size electricpete 3/2/01

Re: Industrial Motor Vibration Monitoring Market Size  3/6/01

Re: Industrial Motor Vibration Monitoring Market Size Dnicejr 2/6/01

Re: Industrial Motor Vibration Monitoring Market Size Dave Gallagher 2/6/01

Air piston vibrators leising@slb.com 2/2/01

9X vibration on Centrifugal Compressor wiwik 2/1/01

Re: 9X vibration on Centrifugal Compressor franko 4/4/01

Re: 9X vibration on Centrifugal Compressor George English 2/25/01

Re: 9X vibration on Centrifugal Compressor Jerry Stokes 2/9/01

Re: 9X vibration on Centrifugal Compressor George English 2/25/01

Re: 9X vibration on Centrifugal Compressor wiwik 2/9/01

Re: 9X vibration on Centrifugal Compressor Alex J 2/6/01

Re: 9X vibration on Centrifugal Compressor George English 2/25/01

Generator vibrations Roberto Jimenez  crobertojimenez@prodigy.net.mx 2/1/01

Re: Generator vibrations  3/1/01

Re: Generator vibrations Arne Lindholm, arnelind/spam/@algonet.se 2/13/01

!!!!!!!!HELP¡¡¡¡¡¡¡¡¡¡¡¡¡ centenoj@pdvsa.com 2/1/01

Re: !!!!!!!!HELP¡¡¡¡¡¡¡¡¡¡¡¡¡ ahmeddokki@hotmail.com 2/2/01

FFT Analysers Pete 2/1/01

Re: FFT Analysers Malcolm Leader 2/9/01

Re: FFT Analysers ahmeddokki@hotmail.com 2/2/01

Re: FFT Analysers  2/2/01

Re: FFT Analysers Sid Booksh 2/1/01

Re: FFT Analysers Sid Booksh 2/1/01

Re: FFT Analysers Dave Miller (uk) 2/1/01

Re: FFT Analysers Carl Bosson 2/1/01

Re: FFT Analysers Dave Miller (uk) 2/1/01

High vibration on Screw Compressor Monday 1/31/01

Re: High vibration on Screw Compressor John.f.kuchler@jci.com 2/1/01

Non sincronous vibration centenoj@pdvsa.com 1/31/01

1/2 Power Method for Calculating Amplification Factor Allen Plymon 1/30/01

Re: 1/2 Power Method for Calculating Amplification Factor Sid Booksh 2/1/01

Re: 1/2 Power Method for Calculating Amplification Factor Tom Irvine, tomirvine@aol.com 1/31/01

vibrations of crane's frame structure due to moving load Nenad Zrnic 1/28/01

Re: vibrations of crane's frame structure due to moving load ismail esen Msc, mech.Eng 2/14/01

Vibrations in Mixed flow (canister) type pumps John Smith (UK) 1/26/01

Re: Vibrations in Mixed flow (canister) type pumps Dave Miller (uk) 1/31/01

Re: Vibrations in Mixed flow (canister) type pumps Sid booksh 1/26/01

Re: Vibrations in Mixed flow (canister) type pumps John Smith 2/6/01

Power Spectral Density curve for wind J. Burget 1/25/01

Re: Power Spectral Density curve for wind Sid Booksh 1/25/01

Low frecuency analisys vibromon@epm.net.co 1/24/01

Re: Low frecuency analisys prashanthande@hotmail.com 1/28/01

Rotating Imbalance oce@bellatlantic.net 1/24/01

Re: Rotating Imbalance skm_rao@rediffmail.com 4/24/01

Re: Rotating Imbalance ahmeddokki@hotmail.com 1/31/01

Re: Rotating Imbalance Sid Booksh 1/24/01

OOPS - an error Sid Booksh 1/24/01

Rotor bar problems. Danny 1/23/01

Re: Rotor bar problems. electricpete 2/12/01

Re: Rotor bar problems. Byron Martin 1/31/01

Re: Rotor bar problems. viblee@netian.com 1/28/01

Re: Rotor bar problems.  1/24/01

Re: Rotor bar problems. Allen Plymon, allenp@burfordinc.com 1/23/01

Vibration Sampling Question jbenzie@ti.L-3com.com 1/23/01

Re: Vibration Sampling Question Tom Irvine, tomirvine@aol.com 1/23/01

Joy Centrifugal Impellers Foxman 1/19/01

Re: Joy Centrifugal Impellers sasaki.0125@plantech.co.jp 1/26/01

Re: Joy Centrifugal Impellers Alex J 1/22/01

Re: Joy Centrifugal Impellers Sid Booksh (mts.ak@att.net) 1/22/01

Re: Joy Centrifugal Impellers Foxman 1/26/01

Re: Joy Centrifugal Impellers Sid Booksh (mts.ak@att.net) 1/28/01

Re: Joy Centrifugal Impellers Foxman 1/29/01

Re: Joy Centrifugal Impellers George English 2/25/01

Re: Joy Centrifugal Impellers sasaki.0125@plantech.co.jp 1/31/01

DASYLab - PSD Magnitudes Steve Zeise (steve.zeise@flir.com) 1/19/01

Re: DASYLab - PSD Magnitudes Sid Booksh 1/21/01

Re: DASYLab - PSD Magnitudes 6/4/04

Re: DASYLab - PSD Magnitudes Erik Concha   eaconcha@equilon.com 1/20/01

RBMWare josephmccormack@hotmail.com 1/18/01

Re: RBMWare Rpratt@hii.com 1/23/01

Re: RBMWare Charlie 1/22/01

Rotary Screw Compressor ksy9059@yahoo.co.kr 1/17/01

Re: Rotary Screw Compressor RC&E, Inc. 3/7/02

Re: Rotary Screw Compressor 8/30/04

Road Vibrations attacking 200 year old home W. Hersee    hersee@yahoo.com 1/16/01

Re: Road Vibrations attacking 200 year old home E. Dussell 4/6/01

Re: Road Vibrations attacking 200 year old home amatuer scientist 1/17/01

Re: Road Vibrations attacking 200 year old home steve 1/16/01

Re: Road Vibrations attacking 200 year old home  1/17/01

High 2X Vibration C. Dostie 1/16/01

Re: High 2X Vibration C.Dostie 1/22/01

Re: High 2X Vibration rinlts@itpvis.ap.nic.in 1/19/01

Re: High 2X Vibration Dnicejr 1/17/01

Re: High 2X Vibration HAP SING 1/17/01

Re: High 2X Vibration electricpete 1/16/01

To "Mike Barnett" Centrifugal Compressor High 3X RPM Vibration ksy9059@yahoo.co.kr 1/16/01

Vibration Imaging diklas@bezeqint.net.il 1/15/01

IQ 2000 software MetaVib 1/15/01

Re: IQ 2000 software Bill  6/22/01

vibration in home midwestern_us@yahoo.com 1/14/01

Re: vibration in home Steve 1/16/01

Machine downtime bin95@bin95.com 1/12/01

!/8" Drop Vibration Machine lance.kaczorowski@grote.com 1/11/01

Permanent Probes for electric motors Keith 1/10/01

Re: Permanent Probes for electric motors dgallagher@ghg.net 1/16/01

Re: Permanent Probes for electric motors Frank Tapper (frankt@jdmairpower.com) 1/11/01

Clamp-on current probe use Sid Booksh, (mts.ak@att.net) Anchorage, AK 1/9/01

Re: Clamp-on current probe use electricpete 1/16/01

Re: Clamp-on current probe use Sid Booksh 1/16/01

Clamp-on current probe use Sid Booksh, (mts.ak@att.net) Anchorage, AK 1/9/01

frequency analysis of pump recirculation B Henry APM 1/8/01

Re: frequency analysis of pump recirculation Sid booksh 1/9/01

Vibration at High Frequency of motor fan assembly Rod       nlcbalanc@powerup.com.au 1/8/01

Re: Vibration at High Frequency of motor fan assembly prashanthande@hotmail.com 1/9/01

Re: Vibration at High Frequency of motor fan assembly Ron Stiemsma 1/9/01

Re: Vibration at High Frequency of motor fan assembly Rod       nlcbalanc@powerup.com.au 1/9/01

Centrifugal Compressor High 3X RPM Vibration ksy9059@yahoo.co.kr 1/8/01

Re: Centrifugal Compressor High 3X RPM Vibration Mike Barnett 1/10/01

Band splitting John Chmielewski 1/8/01

Wanted Vibration Case Histories Joe Petersen 1/5/01

Piping Vibration - Recip. Compressor sajeevk@hotmail.com 12/28/00

Re: Piping Vibration - Recip. Compressor duncanp@tundraeng.com 7/4/02

Re: Piping Vibration - Recip. Compressor Sid Booksh, mts.ak@att.net 1/3/01

dynamic analysis of piping S.R.LAGU (srl@epc.ltindia.com) 12/27/00

Re: dynamic analysis of piping prashant hande@hotmail.com 1/8/01

electrical savings from reducing motor imbalance paul.sharpe@ispat.com 12/20/00

Re: electrical savings from reducing motor imbalance MILIND VAIDYA 1/13/01

Some test results Sid Booksh 1/9/01

Re: Some test results jclough 1/10/01

Re: Some test results Sid Booksh 1/10/01

Re: Found article on energy loss from unbalance Sid Booksh 12/27/00

Energy savings from balancing centrifugal fan Bob Curd 5/9/01

Re: electrical savings from reducing motor imbalance Sid Booksh 12/20/00

Re: electrical savings from reducing motor imbalance Jclough 12/22/00

Re: electrical savings from reducing motor imbalance electricpete 1/3/01

Re: electrical savings from reducing motor imbalance jclough 1/4/01

Re: electrical savings from reducing motor imbalance Sid Booksh 1/4/01

Re: electrical savings from reducing motor imbalance electricpete 12/29/00

Re: electrical savings from reducing motor imbalance Sid Booksh 12/22/00

residential vibration problem -- possibly from an electrical transformer mcstock@enquery.com 12/12/00

Re: residential vibration problem -- possibly from an electrical ... ibrahimhc@vibratek.com.tr 4/6/01

Re: residential vibration problem -- possibly from an electrical ... Sid Booksh, Anchorage, AK 12/14/00

Re: residential vibration problem -- possibly from an electrical ... James-David 12/13/00

Re: residential vibration problem -- possibly from an electrical ... ron.hartlen@sympatico.ca 12/13/00

Diagnostic Chart Steve Ferry 12/12/00

Re: Diagnostic Chart ernie 1/25/01

Re: Diagnostic Chart rurias@sandia.gov 1/23/01

Re: Diagnostic Chart Don  Lagasse 1/3/01

Re: Diagnostic Chart electricpete 12/15/00

Re: Diagnostic Chart Sid Booksh, anchorage, AK 12/14/00

Re: Diagnostic Chart - problem finding Steve Ferry 1/2/01

Re: Diagnostic Chart - problem finding pwshar@ispat.com 1/16/01

Re: Diagnostic Chart Sid Booksh, Anchorage, AK 12/14/00

Re: Diagnostic Chart Roy Carter       Tulsa, Oklahoma 12/18/00

expert system songwenxin2000@sina.com 12/9/00

Modal Analysis - DasyLab - IOtech Jim Q 12/8/00

Re: Modal Analysis - DasyLab - IOtech Erik Concha 12/20/00

Re: Modal Analysis - DasyLab - IOtech Erik Concha       eaconcha@equilon.com  12/28/00

Re: need your email address Sid Booksh  12/21/00

Re: Modal Analysis - DasyLab - IOtech Sid Booksh, (mts.ak@att.net) Anchorage, AK 12/14/00

Re: Modal Analysis - DasyLab - IOtech Art M 12/11/00

Machinexpert continous monitoring system jcaldwe5@ford.com 12/8/00

Re: Machinexpert continous monitoring system John.f.Kuchler@jci.com 12/29/00

Subway vibrations in private home LeatherMet 12/7/00

LUBRICATION FAILURE OF ROLLING ELEMENT BEARING prashanthande@hotmail.com 12/6/00

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING Byron Martin 12/12/00

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING Lee Jaegeun 12/7/00

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING carlos_510 12/6/00

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING prashanthande@hotmail.com 12/17/00

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING DH 1/19/01

Re: LUBRICATION FAILURE OF ROLLING ELEMENT BEARING  2/10/01

Tire pressure&Vibration mehmet kahraman 12/6/00

Excessive Noise from Roots Blower Jim Powers 12/5/00

Re: Excessive Noise from Roots Blower Joe Doddy 5/12/04

Re: Excessive Noise from Roots Blower Joe Doddy 5/12/04

Re: Excessive Noise from Roots Blower Roger Bernhardt 3/28/04

Re: Excessive Noise from Roots Blower pomocanthus 1/2/04

Re: Excessive Noise from Roots Blower Mark Tarbet 12/12/00

Re: Excessive Noise from Roots Blower Jim Powers 12/15/00

Re: Excessive Noise from Roots Blower Lesley_ Swaim@Huntsman.com 12/6/00

Re: Excessive Noise from Roots Blower Alex J 12/6/00

Re: Excessive Noise from Roots Blower Roger Bernhardt 3/28/04

Re: Excessive Noise from Roots Blower Roger Bernhardt 3/28/04

"Rigid" vs. "Stiff" Keith Verspoor 12/4/00

Re: "Rigid" vs. "Stiff" Terry  1/6/01

Re: "Rigid" vs. "Stiff" Sid Booksh, Anchorage, AK 12/7/00

Re: "Rigid" vs. "Stiff" P.F.Joy, EQUATE 1/12/01

Re: "Rigid" vs. "Stiff" Lee Jaegeun 12/5/00

Re: "Rigid" vs. "Stiff" Frank Tapper 12/4/00

HAGGLUNDS DRIVES VIBRATION MTALMEIDA BRAZIL 12/3/00

Re: HAGGLUNDS DRIVES VIBRATION Paul Schumann at SIRN South Africa 10/15/03

Re: HAGGLUNDS DRIVES VIBRATION Arne Lindholm 1/4/01

Water in oil causing high vibration George Black 12/1/00

Re: Water in oil causing high vibration Alex J 12/5/00

Re: Water in oil causing high vibration kverspoor 12/4/00

Article 884  12/1/00

Re: Article 884 kverspoor 12/4/00

Re: Article 884  12/6/00

AC Electric Motor (with A/F Bearings) Axial vibration Kevin Seyler 11/28/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Sid Booksh 12/20/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Don  Lagasse 3/1/01

Re: AC Electric Motor (with A/F Bearings) Axial vibration Shawn.Vail@Fina.com 11/29/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Kevin Seyler 11/30/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Shawn Vail 12/4/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Kevin Seyler 12/10/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Byron Martin 12/12/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Kevin Seyler 12/12/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Byron Martin 12/13/00

Re: AC Electric Motor (with A/F Bearings) Axial vibration Kevin Seyler 12/13/00

As promised - Diagnostic chart Steve Ferry - s.ferry@efftek.co.uk 11/24/00

Diagnostic chart - an update Steve Ferry 11/28/00

Re: Diagnostic chart - an update Sajeevk@hotmail.com 4/9/01

Re: expert system salloumm@bb.astra.com.ar 11/24/00

Overhung Blower vibspecs 11/21/00

Re: Overhung Blower Frank Tapper 12/4/00

Re: Overhung Blower Tom Dominowski SMCO GM  11/30/00

Cooper Split Bearings Dostie 11/20/00

Re: Cooper Split Bearings Kenneth C. Ruiz 1/25/05

Re: Cooper Split Bearings Randal Doss 3/2/01

Re: Cooper Split Bearings Frank Tapper 12/4/00

Re: Cooper Split Bearings Steve Ferry mailto:steve@efftek.co.uk 11/23/00

Re: Cooper Split Bearings rupjhula@satyam.net.in 11/21/00

Re: Cooper Split Bearings rupjhula@satyam.net.in 11/21/00

Re: Cooper Split Bearings carlos_510@yahoo.com 11/21/00

Incorporating point damping / nonproportional damping Austin 11/20/00

RPM TROUBLES Carlos Mora carlmor@intoconsult.com 11/15/00

Re: RPM TROUBLES debashis_b@hotmail.com 12/15/00

Re: RPM TROUBLES Alex J 11/22/00

Re: RPM TROUBLES emile_78@hotmail.com 11/19/00

RPM information Yaciles Perez 11/14/00

catalog requestion naghsh74@netscape.net 11/13/00

operational modal analysis on electric motor Marco 11/13/00

Re: First and second order vibrations generated from crankshaft m... Lee Jaegeun 11/12/00

Need information on Vibration Analysis rjr_611@rediffmail.com 8/10/02

Re: First and second order vibrations generated from cranksha... rjr_611@rediffmail.com 8/10/02

school question radzim@ig.pwr.wroc.pl 11/10/00

diagnostic chart jon armstrong 11/10/00

Re: diagnostic chart MTALMEIDA 12/6/00

Re: diagnostic chart Steve Ferry 11/14/00

Re: diagnostic chart Reeves J. 5/4/01

Re: diagnostic chart reevesjl 5/4/01

Re: diagnostic chart on the net Steve Ferry 11/16/00

Re: diagnostic chart Duane Dobson 11/15/00

Re: diagnostic chart NaLeo 12/6/00

Re: diagnostic chart Brian_Cannon@FO.Cytec.com 12/7/00

tutorials Mohamrd omar 11/10/00

IRD Mechanalysis modle345 carlos_510@yahoo.com 11/7/00

Re: IRD Mechanalysis modle345 janet@actrix.co.nz 1/5/04

Re: IRD Mechanalysis modle345 1/5/04

Re: IRD Mechanalysis modle345 rurias@sandia.gov 11/14/00

Re: IRD Mechanalysis modle345 Dostie 11/9/00

Re: IRD Mechanalysis modle345 stephen@camosun.bc.ca 1/8/05

Re: IRD Mechanalysis modle345 stephen@camosun.bc.ca 1/8/05

Re: IRD Mechanalysis modle345 James Biven <jimb@specificsystems.com> 7/29/03

Re: IRD Mechanalysis modle345 James Biven <jimb@specificsystems.com> 7/29/03

Re: IRD Mechanalysis modle345 carlos_510@yahoo.com 11/10/00

Re: IRD Mechanalysis modle345 James Biven <jimb@specificsystems.com> 7/29/03

Non linear vibration J BURGET 11/7/00

Solenoid Type Jackhammer nk_oboser@commnet.edu 11/6/00

Re: Solenoid Type Jackhammer Gabriel Calos De Vit- e-mail: gdevit@argosmail.com.ar 11/7/00

vibration of water elada58@hotmail.com 11/6/00

Re: vibration of water mark 4/25/01

Re: vibration of water Frank Tapper 12/4/00

Article 827 naghsh74@netscape.net 11/4/00

cup isolator Gabriel Calos De Vit- e-mail: gdevit@argosmail.com.ar 11/2/00

Re: cup isolator 7/23/04

Re: cup isolator lsafford@adamanufacturing.com 10/3/03

Re: cup isolator mbritton 8/20/03

Re: cup isolator mbritton 8/20/03

calibration of  vibraton probes Prashant.Hande@skf.com 10/30/00

Re: calibration of  vibraton probes Art Miller 2/23/01

Vertical High Speed Gear Driven Pump Problems J. Pustay 10/27/00

Re: Vertical High Speed Gear Driven Pump Problems Alex J 10/27/00

high 8x vibration on 4 wheel refrgerant compressor rjones@magnesiumcorp.com 10/27/00

Re: high 8x vibration on 4 wheel refrgerant compressor Alex J 10/27/00

Re: high 8x vibration on 4 wheel refrgerant compressor Sid Booksh 10/27/00

Re: high 8x vibration on 4 wheel refrgerant compressor rjones@magnesiumcorp.com 10/31/00

Vibration Certification written standards Rick 10/26/00

Re: Vibration Certification written standards Steffen Bühler 11/8/00

Re: Vibration Certification written standards Chris 10/27/00

Re: Vibration Certification written standards  10/27/00

Re: Vibration Certification written standards James-David 10/27/00

Re: Vibration Certification written standards Thomas Purackal.<thomas_purackal@pic.com.kw> 11/10/00

Measurements on pump casing Zbigniew.Korendo@pl.abb.com 10/26/00

Re: Measurements on pump casing Frank Tapper 12/4/00

Re: Measurements on pump casing Alex J 10/26/00

Re: Measurements on pump casing John Kuchler 10/26/00

Slip-Sync strobe replacement Toby Paddock 10/25/00

Re: Slip-Sync strobe replacement Bob Miller 10/27/00

Impeller Balancing C. Dostie 10/23/00

Re: Impeller Balancing greg_hammers@hotmail.com 9/4/01

Re: Impeller Balancing Sid Booksh, mts.ak@att.net 10/24/00

Re: Impeller Balancing C. Dostie 10/25/00

Damping of a Spring  10/23/00

scalar values to determine machine cond. versus wv´s and spectra A. M. Schmitz 10/21/00

Re: scalar values to determine machine cond. versus wv´s and spe... John Kuchler, Johnson Controls 10/26/00

Re: scalar values to determine machine cond. versus wv´s and spe... Sid Booksh 10/24/00

Re: scalar values to determine machine cond. versus wv´s and spe... Sid Booksh 10/24/00

Re: scalar values to determine machine cond. versus wv´s and... Joe McCormack; josephmccormack@hotmail.com 10/24/00

Gun fire shock John Chmielewski 10/20/00

Significant vibration step increase on a 11 stage centrifigul charging pump in the horizontal direction Rick 10/20/00

Rick - Call me if you still have this problem. Talmadge Ward 1/10/01

Re: Significant vibration step increase on a 11 stage centrifigul... rupjhula@satyam.net.in 11/18/00

Re: Significant vibration step increase on a 11 stage centrifigul... A.W. Miller 10/30/00

Re: Significant vibration step increase on a 11 stage centrifigul... paul g. kozlowski @ first energy corp 10/24/00

Re: Significant vibration step increase on a 11 stage centrifigul... Brian 10/23/00

fan vibration Francesco 10/20/00

Re: fan vibration C. Dostie 10/25/00

Re: fan vibration FRANCESCO 10/26/00

Re: fan vibration Dostie 11/9/00

Need suggestions - vibrations in pad mounted reciprocating pumps P Chakravorty          pcpwr@ltecd.ltindia.com 10/20/00

Re: Need suggestions - vibrations in pad mounted reciprocating pumps debashis_b@hotmail.com 12/15/00

vibrations in pad mounted reciprocating pumps P Chakravorty          pcpwr@ltecd.ltindia.com 10/20/00

Re: vibrations in pad mounted reciprocating pumps C. Dostie  10/25/00

Re: vibrations in pad mounted reciprocating pumps Alex J 10/20/00

Re: vibrations in pad mounted reciprocating pumps P Chakravorty 10/26/00

vibrations in pad mounted reciprocating pumps P Chakravorty 10/20/00

vibrations in pad mounted reciprocating pumps P Chakravorty          pcpwr@ltecd.ltindia.com 10/20/00

high vibration in elliott PAPPLUS  compressor  10/20/00

Re: high vibration in elliott PAPPLUS  compressor Alex J 10/20/00

Re: high vibration in elliott PAPPLUS  compressor  11/14/00

DAMPENING A WIRE WHEEL BRUSH AS IT WEARS Bill Liptak 10/19/00

Re: DAMPENING A WIRE WHEEL BRUSH AS IT WEARS Joseph Gomez 12/20/00

Re: DAMPENING A WIRE WHEEL BRUSH AS IT WEARS B Wieting 10/23/00

Re: DAMPENING A WIRE WHEEL BRUSH AS IT WEARS B Wieting 10/23/00

Frequency Margin of Bladed Disk Wheel Modes? Ray Bream 10/18/00

inches/sec to MILS conversion Ian Hurrell 10/18/00

Re: inches/sec to MILS conversion electricpete@technologist.com 12/5/00

Re: inches/sec to MILS conversion Alex J 10/18/00

Random vibration - Sinodical vibration Jonas Nilsson Sweden 10/17/00

Re: Random vibration - Sinodical vibration Alex J 10/17/00

Re: Random vibration - Sinodical vibration Jonas 10/18/00

Screw Pumps vibration Gopi 10/11/00

Re: Screw Pumps vibration Alex J 10/16/00

0.40-0.47 x Solo Motor Vibration rjeubank@southernco.com 10/11/00

Re: 0.40-0.47 x Solo Motor Vibration mikep@mainlandinternet.net 8/14/02

Re: 0.40-0.47 x Solo Motor Vibration viblee@netian.com 10/19/00

Re: 0.40-0.47 x Solo Motor Vibration viblee@netian.com 10/19/00

Re: 0.40-0.47 x Solo Motor Vibration Sid booksh (mts.ak@att.net) 10/13/00

Vibration analysis, Tutorial! JS 10/10/00

Re: Vibration analysis, Tutorial! Tom Irvine, tomirvine@aol.com 10/17/00

Re: Vibration analysis, Tutorial! electricpete 12/15/00

Vibration of fan FS 10/10/00

Wireless accelerometer? Vibslab@netzero.net 10/9/00

Re: Wireless accelerometer? Techkor Instrumentation 12/30/03

Re: Wireless accelerometer?  10/18/00

Re: Wireless accelerometer? Alex J 10/16/00

HIGH 1/2 TIMES VIBRATION KEEDWARD@SOUTHERNCO.COM 10/9/00

Re: HIGH 1/2 TIMES VIBRATION MELeader@MSN.COM 12/10/00

Re: HIGH 1/2 TIMES VIBRATION HHACKETT@PECO-ENERGY.COM 10/16/00

Re: HIGH 1/2 TIMES VIBRATION Sid Booksh (mts.ak@att.net) 10/13/00

Vibration Monitoring v/s Reliability Centred Maintenance Joe Mc Cormack 10/8/00

Rating Vibration Velocity kverspoor 10/6/00

Re: Rating Vibration Velocity Rob K Riley rileyrk@basf-corp.com 10/18/00

Re: Rating Vibration Velocity Sid Booksh 10/13/00

Bump Testing Mike Hale 10/5/00

Re: Bump Testing Dnicejr 1/17/01

Re: Bump Testing Mike Hale 1/29/01

1st Critical Speed Excitation. Thomas Purackal. 10/3/00

Re: 1st Critical Speed Excitation. C. Hunter Cloud 10/13/00

Re: 1st Critical Speed Excitation. Sid Booksh (mts.ak@att.net) 10/13/00

Sourcing a Bump Tester Mike Hale 9/29/00

Pedro Bedolla Suástegui. Instituto de Vibración. 9/28/00

Re: Pedro Bedolla Suástegui. Giovanni Araujo 6/30/01

Bearing Fault Frec Radzim 9/28/00

Re: Bearing Fault Frec Sid Booksh (mts.ak@att.net) 10/13/00

Bearing freq equation error Sid Booksh 10/14/00

what instrument are use to measure vibration?? ric chuah 9/27/00

Re: what instrument are use to measure vibration?? mfi 5/29/01

Re: what instrument are use to measure vibration?? Michael Tuxworth at loughborough university England 10/20/00

Strange 2*FL Vibration Of induction motor essesslee 9/25/00

Re: Strange 2*FL Vibration Of induction motor Shawn Vail 9/29/00

Re: Strange 2*FL Vibration Of induction motor Joe Mc Cormack 10/16/00

Re: Strange 2*FL Vibration Of induction motor Scott Raithby 9/29/00

Lighting Pole Vibration Fantino (Tino) Violi 9/24/00

Re: Lighting Pole Vibration Sid booksh (mts.ak@att.net 10/2/00

Re: Lighting Pole Vibration dwight.d.albright@philips.com 9/28/00

Re: Lighting Pole Vibration Sid Booksh (mts.ak@att.net) 9/26/00

re:WANTED CSI 2110 MANUAL DITTRICH@ECE.ORST.EDU 9/21/00

re:WANTED CSI 2110 MANUAL Foxman 1/30/01

ISO/NIST bkmartin@camtech.net.au 9/21/00

Balancing below & running above the first critical of a rotor! Mike Fitch 9/18/00

Re: Balancing below & running above the first critical of a rotor! Neil Wig 2/20/02

Re: Balancing below & running above the first critical of a rotor! Terry Tomlinson 11/25/00

Re: Balancing below & running above the first critical of a rotor! Joe Paulsen 10/24/00

Re: Balancing below & running above the first critical of a r... shreearihant 6/25/04

Re: Balancing below & running above the first critical of a rotor! nede@setcousa.com 10/6/00

Re: Balancing below & running above the first critical of a rotor! Byron martin 9/29/00

Re: Balancing below & running above the first critical of a rotor! Alex J 9/28/00

Re: Balancing below & running above the first critical of a rotor! Allen Plymon 9/27/00

Re: Balancing below & running above the first critical of a rotor! Allen Plymon 9/27/00

Re: Balancing below & running above the first critical of a rotor! viblee@netian.com 9/26/00

Re: Balancing below & running above the first critical of a rotor! Sid Booksh (mts.ak@att.net) 9/26/00

Infra Red Imaging ekwik@rtimail.com 9/14/00

Re: Infra Red Imaging dwight.d.albright@philips.com 9/28/00

Paper Machine Natural Frequency Chris Dostie 9/13/00

Re: Paper Machine Natural Frequency Michael Tuxworth at Loughborough Uni England 10/20/00

Re: Paper Machine Natural Frequency Mark E. Blake 10/9/00

Re: Paper Machine Natural Frequency Alex J 9/19/00

Cracked Rotor Bars Chris Dostie  9/13/00

Re: Cracked Rotor Bars Tony Croucher 3/11/01

Re: Cracked Rotor Bars kverspoor 9/22/00

Re: Cracked Rotor Bars JDS 9/22/00

Re: Cracked Rotor Bars Alex J 9/19/00

Re: Cracked Rotor Bars kverspoor 9/18/00

Re: Cracked Rotor Bars  9/15/00

Re: Cracked Rotor Bars  9/15/00

Re: Cracked Rotor Bars  9/14/00

Re: Cracked Rotor Bars anonymous 9/15/00

Dryer can balancing (in place) Terry Tomlinson  9/12/00

Re: Dryer can balancing (in place) bgbiby@ispat.com 10/9/00

Re: Dryer can balancing (in place) rdoss 9/14/00

Re: Dryer can balancing (in place) 4/30/04

Re: Dryer can balancing (in place) dbales@usg.com 4/30/04

Re: Dryer can balancing (in place) dbales@usg.com 4/30/04

Re: Dryer can balancing (in place) Sid Booksh (mts.ak@att.net) 9/14/00

Buffalo F.D.Fan 3X vibration essesslee 9/8/00

Re: Buffalo F.D.Fan 3X vibration Byron Martin 9/29/00

Re: Buffalo F.D.Fan 3X vibration Mike Barnett 9/18/00

Re: Buffalo F.D.Fan 3X vibration Mike Barnett 9/14/00

Re: Buffalo F.D.Fan 3X vibration Donald Nice Jr. 9/15/00

Tricky Problem vikash@tosl.com 9/8/00

Re: Tricky Problem BGBIBY@ispat.com 10/9/00

Re: Tricky Problem verspoor@hotmail.com 9/22/00

Re: Tricky Problem JDS 9/22/00

Re: Tricky Problem Alex J 9/19/00

Re: Tricky Problem viblee@netian.com 9/15/00

Re: Tricky Problem Shawn.Vail@Fina.com 9/15/00

Re: Tricky Problem viblee@netian.com 9/15/00

Re: Tricky Problem rdoss 9/14/00

high frequency spindle dave 9/7/00

Re: high frequency spindle Dan Timberlake 10/3/00

Very high directional vibration on a ventilator JM Tejera 9/7/00

Re: Very high directional vibration on a ventilator Sid booksh (mts.ak@att.net) 9/14/00

Looking for a Vibration Monitoring Instrument Nilton Barron - Tetra Pak Peru 9/5/00

BALANCING Hassan 9/4/00

Re: BALANCING Alex J 10/10/00

Re: BALANCING Rstiemsma@dteenergy.com 9/14/00

Re: BALANCING paul g. kozlowski 9/8/00

Re: BALANCING R. Stiemsma 9/14/00

Vibration Over range nicleo 9/2/00

Re: Vibration Over range Alex J 10/10/00

Vibration analysers for small ships. Murray Armstrong. 9/2/00

Re: Vibration analysers for small ships. rob mooij - techno fysica b.v. Netherlands 1/29/02

Re: Vibration analysers for small ships. J Lawrence 9/10/00

Re: Vibration analysers for small ships. Sid Booksh (mts.ak@att.net) 9/5/00

Vibration Signature Difference between normal and C3 Bearings ramiro_on_the_road@yahoo.com 9/1/00

Re: Vibration Signature Difference between normal and C3 Bearings MEBlake 9/12/00

Re: Vibration Signature Difference between normal and C3 Bear... bkmartin@camtech.net.au 9/21/00

Re: Vibration Signature Difference between normal and C3 Bearings Shawn.Vail@Fina.com 9/11/00

Re: Vibration Signature Difference between normal and C3 Bear... bob bracher 4/10/01

Re: Vibration Signature Difference between normal and C3 Bearings josephmccormack@hotmail.com 9/6/00

Intrinsically Safe Data collector Nasir Naqvi 9/1/00

Re: Intrinsically Safe Data collector josephmccormack@hotmail.com 9/6/00

Re: Intrinsically Safe Data collector Rich Pratt 9/5/00

Acceleration -> Velocity -> displacement benoit.picoux@ec-nantes.fr 8/31/00

Re: Acceleration -> Velocity -> displacement Tom Irvine, tomirvine@aol.com 9/7/00

Vibration Listening Devices philip_cybolsky@abicon.com 8/30/00

German translation paulek 8/30/00

Re: German translation Stokesjw@bp.com 9/7/00

Vibration Research Resources Ilanko@mech.canterbury.ac.nz 8/29/00

Estimating Critical Speed from Speed Sweep Data???? Joe DiVito 8/29/00

Re: Estimating Critical Speed from Speed Sweep Data???? EJY 9/12/00

Effect of Sweep Rate on Resonance Amplitude??????? Joe DiVito 8/28/00

Re: Effect of Sweep Rate on Resonance Amplitude???????  10/15/00

Re: Effect of Sweep Rate on Resonance Amplitude??????? Nikos N.   nnikol@tee.gr  9/5/00

Data Collector & Safe Operation Nasir Naqvi 8/26/00

Re: Data Collector & Safe Operation 12/5/03

Airbourne ultrasonics Stephen Malec 8/25/00

Fluctuation Vibration of GAsTurbine F6 phiennhct 8/23/00

Re: Fluctuation Vibration of GAsTurbine F6 Alex J 10/10/00

Re: Fluctuation Vibration of GAsTurbine F6 Alex J 9/11/00

Controlling Piping Vibration Luís Santos 8/23/00

Electrical Motor Analysis MEBlake 8/22/00

Side Bands rennie 8/21/00

Re: Side Bands Steffen Bühler 9/7/00

Re: Side Bands Sid Booksh (mts.ak@att.net) 9/5/00

mils conversion Randall Phelps 8/21/00

CSI Mastertrend plotting Randall Phelps 8/21/00

Re: CSI Mastertrend plotting rst@stetzerelectric.com 10/11/00

Vibration Anaylsis (chassis) Soap Box Derby racer ryansean@ix.netcom.com 8/19/00

Re: Vibration Anaylsis (chassis) Soap Box Derby racer Sid Booksh (mts.ak@att.net) 9/1/00

Re: Vibration Anaylsis (chassis) Soap Box Derby racer AJ 8/24/00

vibration level and standard of servo motor w.m.chen 8/18/00

Vibration in diesel engines Ong H 8/17/00

Re: Vibration in diesel engines Steffen Bühler 8/18/00

aluminium sanding rich hulls 8/16/00

Material compaction by vibration Marc Allard 8/16/00

Re: Material compaction by vibration R. Lenz 11/27/00

Re: Material compaction by vibration sugeng widodo 3/29/01

Sensitivity of accelerometers John Chmielewski 8/15/00

Re: Sensitivity of accelerometers ghamrm0c@aramco.com 8/2/04

Re: Sensitivity of accelerometers Steffen Bühler 8/16/00

Re: Sensitivity of accelerometers John Chmielewski 8/16/00

Wavelet for vibration analysis gluo01@bcuc.ac.uk 8/15/00

Accelerometer Nasir Naqvi 8/15/00

Re: Accelerometer james.b.carrel@jci.com 8/18/00

Re: Accelerometer Steffen Bühler 8/24/00

Re: Accelerometer viblee@netian.com 8/17/00

Re: Accelerometer Steffen Bühler 8/16/00

Any experience with SKF Vibration Pens? gmihala@apexmail.com 8/14/00

Re: Any experience with SKF Vibration Pens? C. Dostie 10/25/00

What is Order of Enviromental Stresses - Vibration or Thermal  during ESS Dave 8/14/00

Tubular vibrational feeder final year engineering student 8/10/00

effects of faults in bearing rudi 10/8/2000 8/9/00

Re: effects of faults in bearing Nikos Nikolaou 9/2/00

Re: effects of faults in bearing Sid Booksh 8/11/00

Sidebands Giao Lan Phuong 8/9/00

Re: Sidebands james.b.carrel@jci.com 8/18/00

Re: Sidebands Nasir Naqvi 8/15/00

Sidebands Giao  8/9/00

screw compressors dslytle 8/8/00

Re: screw compressors james.b.carrel@jci.com 8/18/00

Re: screw compressors dslytle 8/24/00

Balance without the impeller? Joe B 8/8/00

Re: Balance without the impeller? Sid Booksh (mts.ak@att.net) 8/11/00

Re: Balance without the impeller? Sid Booksh (mts.ak@att.net) 8/11/00

Wanted to buy an used Ultrasound detector UE 2000 & Vibration analyzing complete sistem like SKF and others townsend@hotlink.com.br 8/5/00

Gear  Box  Problem Nasir  Naqvi 8/2/00

Re: Gear  Box  Problem manoj 8/16/00

Re: Gear  Box  Problem mulyono T 8/3/00

Re: Gear  Box  Problem Nasir  Naqvi 8/4/00

Re: Gear  Box  Problem james curl 1/27/02

Re: Gear  Box  Problem ramiro_on_the_road@yahoo.com 8/8/00

Re: Gear  Box  Problem NASIR 8/4/00

harmonic couple mulyono T 8/2/00

requirements for a human rated vibration(shaker table) Dammond Barkel Barkel@ttc-usa.com 8/2/00

Re: requirements for a human rated vibration(shaker table) Tom Irvine, tomirvine@aol.com 8/2/00

Re: requirements for a human rated vibration(shaker table) fte@skynet.be 5/4/04

Vibration critera of sensitive electronic equipment Fülöp Augusztinovicz 7/28/00

Re: Vibration critera of sensitive electronic equipment B Wieting 8/9/00

What is the conversion formula for acceleration rms (cm/sec^2) to velocity rms (m/s) scot.seifert@alfalaval.com 7/26/00

Re: What is the conversion formula for acceleration rms (cm/sec^2... mulyono T 8/2/00

Re: What is the conversion formula for acceleration rms (cm/sec^2... steffen.buehler@pruftechnik.com 7/27/00

Re: What is the conversion formula for acceleration rms (cm/sec^2... viblee@netian.com 7/26/00

Predict DLI equipment feedback Shannon Craig 7/25/00

Re: Predict DLI equipment feedback Robert Nichol, Halliburton Company 8/25/00

Control shakers with PC antonio.garcia@seat.es 7/21/00

Vibration on Overhead Cranes Manoj 7/20/00

Re: Vibration on Overhead Cranes joeburchett@home.com 2/4/01

Re: Vibration on Overhead Cranes Dr. K. Sarh 7/23/00

Re: Vibration on Overhead Cranes 12/11/03

Predictive maintenance in Surface mount processes francisco_pico@hp.com 7/18/00

120 Hz Freq. (.08 in/sec) on different motors, same compressor donnie.meadows@alcoa.com 7/18/00

Re: 120 Hz Freq. was actually 4x donnie.meadows@alcoa.com 7/19/00

Re: 120 Hz Freq. (.08 in/sec) on different motors, same compressor MSMITH 7/18/00

Re: 120 Hz Freq. (.08 in/sec) on different motors, same compressor Sid Booksh (mts.ak@att.net) 7/18/00

Are there any standards for intensity of hand-held massagers Diwakar Vashishat 7/17/00

vibration readings of bfwpump drive turbine vibkare@usa.net 7/17/00

Re: vibration readings of bfwpump drive turbine Shawn Vail 7/25/00

Drive-Belt's Problems Giao Lan Phuong 7/17/00

Re: Drive-Belt's Problems Nasir Naqvi 8/16/00

Re: Drive-Belt's Problems NAsir 8/16/00

High vibration of overhung blower dasgupta_debasish@hotmail.com 7/17/00

Re: High vibration of overhung blower mulyono 8/2/00

Re: High vibration of overhung blower viblee@netian.com 7/26/00

Dasylab VIT with Iotech wavebook 14  vibration worksheets Erik Concha   (eaconcha@equilon.com) 7/14/00

Re: Dasylab VIT with Iotech wavebook 14  vibration worksheets Art Miller, awmiller@cmsenergy.com 10/30/00

Re: Dasylab VIT with Iotech wavebook 14  vibration worksheets Phil Taylor, Suffolk, England. 8/12/00

Re: Dasylab VIT with Iotech wavebook 14  vibration worksheets Jim Rescheske 7/17/00

Re: Dasylab VIT with Iotech wavebook 14  vibration worksheets Erik Concha  (eaconcha@equilon.com) 7/21/00

To Jim - Re: IOTech and DasyLab Sid Booksh, Anchorage Alaska 7/17/00

Re: To Jim - Re: IOTech and DasyLab Graham Holbrook,  Vancouver Island (gholbro@telus.net) 7/28/00

Re: To Jim - Re: IOTech and DasyLab Erik Concha (eaconcha@equilon.com) 7/30/00

Re: To Jim - Re: IOTech and DasyLab Sid Booksh (mts.ak@att.net) 8/11/00

4.26 X Vibration of a Turbine's Gearbox M. Baamer 7/13/00

Re: 4.26 X Vibration of a Turbine's Gearbox Sid Booksh 7/16/00

Re: 4.26 X Vibration of a Turbine's Gearbox viblee@netian.com 7/13/00

4.26 X Vibration of a Turbine's Gearbox  7/13/00

vibration monitoring of lobe type blowers vibkare@usa.net 7/12/00

Re: vibration monitoring of lobe type blowers SVsailboat@Aol.com 7/21/00

Re: vibration monitoring of lobe type blowers vibkare@usa.net 7/21/00

Re: vibration monitoring of lobe type blowers ber 7/12/00

vibration monitoring of lobe type blowers  7/12/00

Re: vibration monitoring of lobe type blowers bernard charlesworth 7/12/00

wavelet algorithms gaoyong luo 7/11/00

Re: wavelet algorithms gafa12@yahoo.com 7/16/00

Re: wavelet algorithms  7/11/00

vibration standards vibkare@usa.net 7/10/00

Re: vibration standards Steffen Buehler 7/18/00

Re: vibration standards stiemsmar@dteenergy.com 7/10/00

contribution of hydraulic forces to vibration vibkare@usa.net 7/10/00

Re: contribution of hydraulic forces to vibration Erik Concha   (eaconcha@equilon.com) 7/16/00

Using Entek software/hardware Bernard Charlesworth 7/10/00

Re: Using Entek software/hardware Jim Rescheske 7/17/00

Re: Using Entek software/hardware Bob P 10/24/00

Re: Using Entek software/hardware Matthew Hornby 7/17/00

Re: Using Entek software/hardware manoj 7/16/00

Re: Using Entek software/hardware Sid Booksh 7/10/00

vibration in pumps vibkare@usa.net 7/9/00

Re: vibration in pumps ronpeck01@msn.com 5/17/04

Re: vibration in pumps ronpeck01@msn.com 5/17/04

Re: vibration in pumps Dr. K. Sarh 7/23/00

Re: vibration in pumps rdoss 7/10/00

Re: vibration in pumps Jorge Arca 9/14/00

Re: vibration in pumps rdoss 7/10/00

MATLAB program for rotative machine condition monitoring RPJ 7/8/00

Re: MATLAB program for rotative machine condition monitoring gaoyong luo 7/11/00

Re: MATLAB program for rotative machine condition monitoring  2/22/02

Re: MATLAB program for rotative machine condition monitoring gaoyong luo 7/11/00

vibration on reciprocating machinery vibkare@usa.net 7/4/00

Re: vibration on reciprocating machinery ramiro_on_the_rod@yahoo.com 7/5/00

Vibration across Wires Jason 7/3/00

Re: Vibration across Wires Jim 7/18/00

Literature on motor Current Analysis Chandra 6/30/00

Re: Literature on motor Current Analysis  7/28/00

Re: Literature on motor Current Analysis viblee@netian.com 7/4/00

Re: Literature on motor Current Analysis Debasish Dasgupta 7/1/00

vibration in Archery equipment Dave 6/28/00

Re: vibration in Archery equipment scottandkarens@aol.com 12/5/01

Re: vibration in Archery equipment Dave Draper, d.draper@tesco.net 7/6/00

Re: vibration in Archery equipment Dave 7/9/00

Re: vibration in Archery equipment Tom Irvine, tomirvine@aol.com 6/29/00

Rotordynamic Books Andy Conkey 6/28/00

Calibration smorris@buehlermotor.com 6/28/00

Re: Calibration James-David 7/2/00

NEED ACCEPTANCE CRITERIA, NEW INSTALLATION SPECS. Glen@machinediagnostics.com 6/28/00

Re: NEED ACCEPTANCE CRITERIA, NEW INSTALLATION SPECS. bgbiby@ispat.com 6/30/00

Bearing Fault Frec. Neftaly Moreno 6/28/00

Re: Bearing Fault Frec. MSMITH 7/18/00

Re: Bearing Fault Frec. Francisco Ballesteros 6/29/00

Re: Bearing Fault Frec. greg_klein@huntsman.com 6/29/00

Locking Capability of a Nyloc Nut Dave Draper 6/28/00

Vibration signature of rubbing in vacuum pump Debasish Dasgupta,  cm@spl.co.in,  dasgupta_debasish@hotmail.com 6/28/00

Re: Vibration signature of rubbing in vacuum pump M. Baamer 7/19/00

Screw Compressor Monitoring Debasish Dasgupta 6/28/00

PC based Vibration Analyzer Kusaywwa@pssch.ps.ge.com 6/27/00

Re: PC based Vibration Analyzer  8/25/00

Re: PC based Vibration Analyzer Sid Booksh, Anchorage AK 7/4/00

Re: PC based Vibration Analyzer Francisco Ballesteros 6/29/00

Vibration in a Hand Held Power Tool peter_lane@mil_elect_tool.com 6/27/00

Re: Vibration in a Hand Held Power Tool seniorvibe@aol.com 6/27/00

Re: Vibration in a Hand Held Power Tool  6/28/00

Re: Vibration in a Hand Held Power Tool seniorvibe@aol.com 6/28/00

Re: Vibration in a Hand Held Power Tool peter_lane@mil_elect_tool.com 6/28/00

Re: Vibration in a Hand Held Power Tool Todd Dahling, todd.dahling@manta-oh.com 7/5/00

7X vibration in a Cooling Tower Pump Motor Ali Abrar (aliabra@brain.net.pk) 6/27/00

Re: 7X vibration in a Cooling Tower Pump Motor Rup 7/2/00

Re: 7X vibration in a Cooling Tower Pump Motor Rup 7/2/00

Re: 7X vibration in a Cooling Tower Pump Motor Ali Abrar aliabra@brain.net.pk 7/2/00

Re: 7X vibration in a Cooling Tower Pump Motor seniorvibe@aol.com 6/27/00

Vibration measurement Adrian 6/24/00

VIBRATION LIMITS FRANCISCO JAVIER jolivare@www.imp.mx 6/23/00

Re: VIBRATION LIMITS Steffen Buehler 6/30/00

vibration measurement on hand held equipment Adrian 6/23/00

Re: vibration measurement on hand held equipment theyanith@yahoo.com.my 4/16/04

Axial Float of motor Manoj 6/22/00

Re: Axial Float of motor R Chaudhuri 6/27/00

DasyLab data reduction software Sid Booksh (mts.ak@att.net) 6/22/00

Multi-stage pump vibration after impeller trimming essess@skcorp.com 6/22/00

Re: Multi-stage pump vibration after impeller trimming viblee@netian.com 6/27/00

CSI RBMware verses MasterTrend / I would like to hear about your experiences and recommendations. rirayme@wcnoc.com 6/22/00

Re: CSI RBMware verses MasterTrend / I would like to hear about y... atmcgreevy@toast.net 9/9/00

Re: CSI RBMware verses MasterTrend / I would like to hear about y... Bernard charlesworth 7/13/00

Re: CSI RBMware verses MasterTrend / I would like to hear abo...  10/16/01

CSI RBMware verses MasterTrend / I would like to hear about y... manoj 6/22/00

Re: CSI RBMware verses MasterTrend / I would like to hear about y...  6/23/00

Motor Vibration Problem Manoj 6/22/00

Re: Motor Vibration Problem Found the Problem 7/17/00

Re: Motor Vibration Problem  9/21/00

Re: Motor Vibration Problem Ali Abrar aliabra@brain.net.pk 6/27/00

Re: Motor Vibration Problem stiemsmar@dteenergy.com 6/26/00

Re: Motor Vibration Problem manoj 6/27/00

Re: Motor Vibration Problem seniorvibe@aol.com 6/22/00

Re: Motor Vibration Problem Manoj 6/22/00

Re: Motor Vibration Problem manoj 6/22/00

Re: Motor Vibration Problem Manoj 6/22/00

Re: Motor Vibration Problem seniorvibe@aol.com 6/26/00

Re: Motor Vibration Problem Sid Booksh 6/22/00

Re: Motor Vibration Problem MANOJ 6/22/00

Re: Motor Vibration Problem vasanth Bhat 6/22/00

Re: Motor Vibration Problem manoj 6/22/00

Re: Motor Vibration Problem manoj 6/22/00

Re: Motor Vibration Problem vasanth Bhat 6/23/00

Re: Motor Vibration Problem Manoj 6/23/00

Re: Motor Vibration Problem vasanth Bhat 6/23/00

Re: Motor Vibration Problem MANOJ 6/27/00

Re: Motor Vibration Problem Rup Chaudhuri 7/3/00

Transformer Vibration Testing Mike Boskell 6/20/00

Hot Oil Pump High Vibration Mike Boskell 6/20/00

Sensodec On-Line System Mike Chandler 6/20/00

Re: Sensodec On-Line System 9/28/04

TEST BED RESONANCE IN A PLANETARY GEARBOX OF 1.3MW Ing. Javier Rodríguez 6/20/00

About vibration readings narayananvenkatesan@hotmail.com 6/16/00

Re: About vibration readings Efren Fabula 7/8/04

Re: About vibration readings S.T.ANBUKKANI, mdi-india@consultant.com 9/9/00

Re: About vibration readings khalifapasha@usa.net 6/20/00

IR Thermography Training Matthew Hornby 6/16/00

Automobile Shock & Vibration Tom Passetti 6/14/00

Re: Automobile Shock & Vibration Tom Irvine, tomirvine@aol.com 6/14/00

Rooftop fans Jbalko 6/12/00

Re: Rooftop fans Vasanth Bhat 6/15/00

urgent please Vibration on Reciprocating compressor nazeer_hussain@usa.net 6/12/00

Re: urgent please Vibration on Reciprocating compressor vinod_n_bhatt@dresser-rand.com 10/1/03

Re: urgent please Vibration on Reciprocating compressor Rup Chaudhuri 7/3/00

Re: urgent please Vibration on Reciprocating compressor Ray Kelm 6/14/00

Re: urgent please Vibration on Reciprocating compressor Ramiro Leon 6/20/00

Re: urgent please Vibration on Reciprocating compressor Sarafian Salleh 7/11/04

HP Hydraulic Pump Info Needed Tony Rynearson 6/10/00

Re: HP Hydraulic Pump Info Needed Harris effendy 8/20/02

vibration white finger - survey Steve Howarth 6/9/00

Re: vibration white finger - survey 0141941@student.ul.ie 1/25/05

Re: vibration white finger - survey N.HEFFERNAN. 8/23/00

Re: vibration white finger - survey Steve Howarth 10/25/00

Locating "A Torsional Vibration Handbook", Nestorides, E.J. dennis.greenlee@bakerhughes.com 6/8/00

VIBROTIP MADE BY PRUFTECHNIK AG TOM TROW  I.P. TICONDEROGA N.Y. 6/7/00

Re: VIBROTIP MADE BY PRUFTECHNIK AG Matthew Hornby 6/20/00

Ever hear of CML out of UK, Sentinel 3000 VibAlarm system? Darren Kennedy, Canadian Coast Guard 6/7/00

Re: Ever hear of CML out of UK, Sentinel 3000 VibAlarm system? Gerd Rech 11/1/00

hydraulic pumps gerjes@maltanet.net 6/5/00

Re: hydraulic pumps Yen Cat nvyencat.yahoo.com 6/6/00

Orbital data analysis  6/5/00

Vibration on Hot gas Blower nazeer_hussain@usa.net 6/5/00

Re: Vibration on Hot gas Blower vasanth bhat 6/15/00

ayuda sobre rodamientos trucho@uol.cl 6/3/00

Re: ayuda sobre rodamientos automind@entelchile.net 8/1/00

VIBRATIONS ON A RECIPROCATING DIAPHRAM GAS COMPRESSOR(CORBLIN MODEL A2) KOZLOWSKIP@FIRSTENERGYCORP.COM 6/1/00

Vibrating table used to insert .005 dia pins tcashman@innocore.com 5/30/00

Can you help about my investigation?. I working about Balancing Machine Walter Gomez, mechanical's engeeniers student from Venezuela 5/26/00

Re: Can you help about my investigation?. I working about Balanci... ahmeddokki@hotmail.com 1/31/01

Re: Can you help about my investigation?. I working about Balanci... paul lunn GE 11/14/00

Ingersol Rand SHP 350 Rotary Screw Compressors. Robert.Headley@OPC.Com 5/22/00

Re: Ingersol Rand SHP 350 Rotary Screw Compressors. 11/13/03

Re: Ingersol Rand SHP 350 Rotary Screw Compressors. 11/13/03

Re: Ingersol Rand SHP 350 Rotary Screw Compressors. 11/13/03

Re: Ingersol Rand SHP 350 Rotary Screw Compressors. 11/13/03

Re: Ingersol Rand SHP 350 Rotary Screw Compressors. Mike Barnett 5/29/00

Average Salary for a Vibration Institute Certified Vibration Analyst Robert.Headley@OPC.Com 5/22/00

Re: Average Salary for a Vibration Institute Certified Vibration ... Terrence O'Hanlon 9/9/00

Re: Average Salary for a Vibration Institute Certified Vibration ... Don Nice, jr. 6/23/00

Re: Average Salary for a Vibration Institute Certified Vibration ... collierm@flash.net 6/15/00

Re: Average Salary for a Vibration Institute Certified Vibration ... rjb 6/2/00

Re: Average Salary for a Vibration Institute Certified Vibration ... Allen Plymon 5/23/00

Re: Average Salary for a Vibration Institute Certified Vibration ... Keith Kasinger 5/22/00

Re: Average Salary for a Vibration Institute Certified Vibrat... Donald Nice, Jr. 7/6/00

Re: Average Salary for a Vibration Institute Certified Vibrat... Roy Carter 6/1/00

Re: Average Salary for a Vibration Institute Certified Vibrat...  5/23/00

Re: Average Salary for a Vibration Institute Certified Vibrat... John Chmielewski 5/25/00

Vibration guidlines pdvech@danet.net 5/22/00

gearbox vibration monitoring eknyeboah@aol.com 5/20/00

Re: gearbox vibration monitoring vasanth bhat 6/15/00

new motor with high vibrations jose.hidalgo@navegalia.com 5/18/00

Re: new motor with high vibrations Alex J 5/24/00

new motor with high vibrations  5/18/00

Rolling Mill Vibration Analysis Les Dorwart @ SIEMENS-Westinghouse 5/18/00

Re: Rolling Mill Vibration Analysis 1/5/03

Re: Rolling Mill Vibration Analysis Doug Smithman 7/7/00

Re: Rolling Mill Vibration Analysis info@sensorscript.com 11/19/01

Re: Rolling Mill Vibration Analysis 8/4/04

Re: Rolling Mill Vibration Analysis Ned Endres - TMS 6/23/00

Re: Rolling Mill Vibration Analysis Don Nice, Jr 6/21/00

Fixtures with Compound Angles-Ligitimate? Soozyq8131@aol.com 5/15/00

Re: Fixtures with Compound Angles-Ligitimate? Tom Irvine 5/16/00

Expert systems for machinery failure prediction eeintvdm@puknet.puk.ac.za 5/15/00

Automotive Vibration/Mechanical Shock Requirements TJP 5/15/00

Re: Automotive Vibration/Mechanical Shock Requirements Tom Irvine, tomirvine@aol.com 5/15/00

VIBRATION TEST EQUIPMENT FOR MONITORING SPINUP AND COASTDOWN OF A TURBINE GENERATOR SET rirayme@wcnoc.com 5/15/00

Re: VIBRATION TEST EQUIPMENT FOR MONITORING SPINUP AND COASTDOWN ... viblee@netian.com 5/31/00

Re: VIBRATION TEST EQUIPMENT FOR MONITORING SPINUP AND COASTDOWN ... Alex J 5/17/00

Re: VIBRATION TEST EQUIPMENT FOR MONITORING SPINUP AND COASTDOWN ... Yen Cat 5/16/00

Re: VIBRATION TEST EQUIPMENT FOR MONITORING SPINUP AND COASTD... Ian Kinnaird 8/27/01

Motor Current Analysis / Collection Spec ? greg_klein@huntsman.com 5/13/00

Help on Muffler Vibration  5/11/00

Re: Help on Muffler Vibration Todd Dahling, todd.dahling@manta-oh.com 5/25/00

Re: Help on Muffler Vibration Yen Cat 5/12/00

Predicting Ballscrew Failure Charles.Stephens@CAT.com 5/10/00

Re: Predicting Ballscrew Failure PAUL MITCHELL 11/8/04

Re: Predicting Ballscrew Failure PAUL MITCHELL 11/8/04

Re: Predicting Ballscrew Failure PAUL MITCHELL 11/8/04

Re: Predicting Ballscrew Failure atm3@daimlerchrysler.com 9/9/00

Re: Predicting Ballscrew Failure B Wieting 6/9/00

Vibration data sets required eeintvdm@puknet.puk.ac.za 5/9/00

FFT Spectrum Analysis Giao Lan Phuong 5/4/00

Re: FFT Spectrum Analysis TJP 5/15/00

Re: FFT Spectrum Analysis vibinst@anet-chi.com 5/8/00

Re: FFT Spectrum Analysis Hugo van Tienhoven   vtao2@cistron.nl 5/4/00

Laser alignment B. Coates 5/3/00

Re: Laser alignment Dave Gallagher 1/4/01

Re: Laser alignment Roy Carter 5/9/00

Re: Laser Belt Alignment Duane A. Dobson 9/12/00

Re: Laser Belt Alignment Byron Martin 10/5/00

Re: Laser Belt Alignment duanedobson@yahoo.com 10/17/00

VANE PASS FREQS OF IMPELLER/DIFFUSER COMBINATIONS bob_kaplan@fpl.com 5/2/00

Re: VANE PASS FREQS OF IMPELLER/DIFFUSER COMBINATIONS Zbigniew.Korendo@pl.abb.com 5/5/00

2nd Pivotal Mode of an Axial Air Compressor Andy Conkey apconkey@tamu.edu 4/28/00

Cumlative Fatigue Damage Andy Conkey(apconkey@tamu.edu 4/28/00

Re: Cumlative Fatigue Damage Hugo van Tienhoven   vtao2@cistron.nl 5/1/00

Fault diagnostic parameters on turbine blades a.Katumba-Kigongo@herts.ac.uk 4/27/00

Re: Fault diagnostic parameters on turbine blades Hugo van Tienhoven   vtao2@cistron.nl 5/1/00

Re: Fault diagnostic parameters on turbine blades Alex J 5/1/00

Re: Fault diagnostic parameters on turbine blades Marcelo Salloum (salloumm@bb.astra.com.ar) 4/28/00

Identifying a Cracked Shaft wilsond@FirstEnergyCorp.com 4/27/00

Re: Identifying a Cracked Shaft fkushner@elliott-turbo.com 6/2/00

Re: Identifying a Cracked Shaft Marcelo Salloum (salloumm@bb.astra.com.ar 5/3/00

Re: Identifying a Cracked Shaft Marcelo Salloum (salloumm@bb.astra.com.ar) 5/2/00

Peak and harmonics at line frequency Giao Lan Phuong 4/27/00

Re: Peak and harmonics at line frequency Steffen Bühler 4/28/00

Re: Peak and harmonics at line frequency H. van Tienhoven  vtao2@cistron.nl 4/27/00

Re: Peak and harmonics at line frequency Giao Lan Phuong 4/28/00

Re: Peak and harmonics at line frequency greg_klein@huntsman.com 4/27/00

vibration monitoring g_nims@hotmail.com 4/26/00

Re: vibration monitoring Marcelo Salloum (salloumm@bb.astra.com.ar) 4/26/00

SV3X  Experience Sid Booksh, MTS Anchorage, AK 4/24/00

Chiller Vibration Analysis Lyle Scott 4/24/00

Re: Chiller Vibration Analysis Keith Kasinger 4/27/00

Re: Chiller Vibration Analysis RAMANATHAN.P.S 5/8/00

Re: Chiller Vibration Analysis Sid Booksh 4/24/00

Possible Rotor Bar Problem on Large Vertical Pump Motor jack_cadogan@fpl.com 4/19/00

Re: Possible Rotor Bar Problem on Large Vertical Pump Motor k.s.murthy 8/17/00

Re: Possible Rotor Bar Problem on Large Vertical Pump Motor Frank Kushner - Elliott Co. 6/2/00

Re: Possible Rotor Bar Problem on Large Vertical Pump Motor Mike Snodgrass, U.S. Electrical Motors 5/19/00

Re: Possible Rotor Bar Problem on Large Vertical Pump Motor DonDeStaso@vibration-trending.com 4/28/00

Re: Possible Rotor Bar Problem on Large Vertical Pump Motor Gavin Shell  gavrrr@iaa.com.au 4/25/00

Justification of vibration analysis & increasing efficiency of maintenance colin@vhsp.com.au 4/16/00

Re: Justification of vibration analysis & increasing efficiency o... Hugo van Tienhoven 4/27/00

Re: Justification of vibration analysis & increasing efficiency o... Hugo van Tienhoven   vtao2@cistron.nl 4/27/00

Re: Justification of vibration analysis & increasing efficiency o... vibra7@pdq.net 4/19/00

Justification of vibration analysis colin@vhsp.com.au 4/16/00

Re: Justification of vibration analysis lesley_swaim@huntsman.com 4/18/00

Applying finite element analysis to vibrations Jeremy Jewell  <jwjewell@juno.com> 4/15/00

Re: Applying finite element analysis to vibrations C. Hunter Cloud 4/28/00

WAVEFORM ANALYSIS SOFTWARE David Bolton ; bodaanme@eatel.net 4/13/00

Re: WAVEFORM ANALYSIS SOFTWARE Jim 4/19/00

gear mesh vibration Ed Yetter 4/12/00

Re: gear mesh vibration  2/10/01

Re: gear mesh vibration vasanth bhat 4/21/00

spectrum armonics at  3 times running velocity Jose M. Otero - PREPA 4/11/00

Re: spectrum armonics at  3 times running velocity jbalko8888@yahoo.com 4/18/00

Re: spectrum armonics at  3 times running velocity Gary Warner 4/17/00

Re: spectrum armonics at  3 times running velocity Marcelo Salloum (salloumm@bb.astra.com.ar) 4/13/00

RE:Penstock Oscillation François Léonard, IREQ, Hydro-Québec 4/6/00

Vibration calibration Patrick Sandoval 4/5/00

Re: Vibration calibration Hugo van Tienhoven   vtao2@cistron.nl 4/27/00

Acceptance Criteria & Testing Hugo van Tienhoven 4/3/00

Re: Acceptance Criteria & Testing 2maintain 4/6/00

Vibration of alternative compressors salloumm@bb.astra.com.ar 3/31/00

Re: Vibration of alternative compressors ramiro_on_the_rad@yahoo.com 5/3/00

Re: Vibration of alternative compressors vasanth Bhat 4/21/00

predicting anisotropic circular fixed plate vibrational modes kawika@ilhawaii.net 3/30/00

positive effects of vibration mattswifty@hotmail.com 3/30/00

Re: positive effects of vibration Mark Tarbet 3/30/00

Vibration Analysis equipment R. Tollasepp 3/30/00

Re: Vibration Analysis equipment Ian Kinnaird 4/18/00

Re: Vibration Analysis equipment Don  Lagasse 3/30/00

Re: Vibration Analysis equipment Ron Stiemsma 3/30/00

Data Plotting Software Kusaywwa@pssch.ps.ge.com 3/29/00

Re: Data Plotting Software Donald Nice, Jr. 7/6/00

Re: Data Plotting Software brian.wieting@hs.utc.com 4/4/00

Vibration of a Horseshoe Denise McLain 3/28/00

Re: Vibration of a Horseshoe Mark Tarbet 4/3/00

Re: Vibration of a Horseshoe  3/30/00

Re: Vibration of a Horseshoe Ron Stiemsma 3/29/00

Re: Vibration of a Horseshoe  3/30/00

Re: Vibration of a Horseshoe Ron Stiemsma 3/30/00

Re: Vibration of a Horseshoe  4/2/00

Re: Vibration of a Horseshoe Denise 4/3/00

Urgent " vibration cyclic" salamala@yahoo.com 3/27/00

Re: Urgent " vibration cyclic" Mark Tarbet 3/30/00

Re: Urgent " vibration cyclic" Alex Jablonski 3/28/00

Re: Urgent " vibration cyclic"  3/28/00

Re: Urgent " vibration cyclic" Joe Francz @ Eastman Kodak 3/29/00

Re: Urgent " vibration cyclic" salamala@yahoo.com 4/2/00

Re: Urgent " vibration cyclic"  4/2/00

Cycling Vibration salamala@yahoo.com 3/26/00

ANALOGY AND RELATION BETWEEN VIBRATION AND ELECTRICAL SYSTEM Debraj Dey 3/24/00

Re: ANALOGY AND RELATION BETWEEN VIBRATION AND ELECTRICAL SYSTEM  4/4/00

Re: ANALOGY AND RELATION BETWEEN VIBRATION AND ELECTRICAL SYSTEM Jim Quigley 3/30/00

Vibration Specialty Corp. Tom 3/23/00

Re: Vibration Specialty Corp. Jeff 4/7/00

Bearing Signal Analysis of Good vs. Bad Bearing B. Wieting 3/17/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Vinayak Patwardhan 6/6/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Vinayak Patwardhan 6/6/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Hugo van Tienhoven 4/3/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Byron Martin 3/22/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing greg_klein@huntsman.com 3/22/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing B Wieting 3/22/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing MILO SHAW 3/22/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing  3/19/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing B Wieting 3/20/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Joe Francz @ Eastman Kodak 3/20/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing B. Wieting 3/20/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Joe Francz @ Eastman Kodak 3/20/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing ian.kinnaird@scottishpower.plc.uk 3/21/00

Re: Bearing Signal Analysis of Good vs. Bad Bearing Joe Francz @ Eastman Kodak 3/20/00

Penstock Oscillation Ian Kinnaird 3/17/00

Who wants inexpensive equipment for motor current analysis efftek@bicne.co.uk 3/16/00

Can Packing affect Vibration on a pump Bubba Beck 3/15/00

Re: Can Packing affect Vibration on a pump Joe Francz @ Eastman Kodak 3/20/00

Re: Can Packing affect Vibration on a pump Don Lag 3/24/00

Impacts in a bearing of a pump at LF and harmonics JM Tejera 3/8/00

Re: Impacts in a bearing of a pump at LF and harmonics Sid Booksh, MTS Anchorage, AK 3/9/00

Re: Impacts in a bearing of a pump at LF and harmonics JM Tejera 3/13/00

Re: Impacts in a bearing of a pump at LF and harmonics  3/19/00

Re: Impacts in a bearing of a pump at LF and harmonics JM 6/20/00

Industry Trends Jbalko888@aol.com 3/8/00

Montoring Wet Stator BWCPs Rick Ulrich 3/8/00

Re: Montoring Wet Stator BWCPs Sid Booksh ,MTS (mts.ak@att.net), Anchorage, AK 3/9/00

Article 199  3/8/00

Current analysis on generator Steve Ferry - efftek@bicne.co.uk 3/8/00

Askania Vibrometer Tom Grant 3/7/00

acceleration monitoring Ed Gibson 3/6/00

Re: acceleration monitoring Steffen Bühler 4/28/00

How to Design & Construct a Vibration-proof Concrete Floor billy.law@kamyuen.com.hk 3/5/00

WNTB used Cincinnati TVS-110 or NEC /MIKRON TH 5104 or Avio Neo Thermo TVS 610 Jaques 3/4/00

Re: WNTB used Cincinnati TVS-110 or NEC /MIKRON TH 5104 or Avio N... mohamed elshaer 2/13/01

vibration in remote controll helicopter ccmackin@home.com 2/28/00

Re: vibration in remote controll helicopter darrinric@webtv.net 2/9/01

Prox probe DC offset reduction to tape recorder Sid booksh, MTS, Anchorage, AK (mts.ak@att.net) 2/28/00

Re: Prox probe DC offset reduction to tape recorder MG Womack 3/3/00

Re: Prox probe DC offset reduction to tape recorder Saeed 6/21/00

Rotary Screw Compressor w/ High Lobe Mesh Freq. greg_klein@huntsman.com 2/26/00

Re: Rotary Screw Compressor w/ High Lobe Mesh Freq. Hugo van Tienhoven 4/3/00

Re: Rotary Screw Compressor w/ High Lobe Mesh Freq. John_Harrison@fmc.com 3/2/00

Use of Dynamic Absorbers on Variable Speed Equipment greg_klein@huntsman.com 2/26/00

Re: Use of Dynamic Absorbers on Variable Speed Equipment  4/17/00

Re: Use of Dynamic Absorbers on Variable Speed Equipment rbrunick@smoky.echobay.com 3/20/00

Re: Use of Dynamic Absorbers on Variable Speed Equipment B. Wieting 2/29/00

Widespread VPF Problem greg_klein@huntsman.com 2/26/00

Re: Widespread VPF Problem Alex Jablonski 2/29/00

Establishing a Vib Program with Reputable Vendor sprenk@hbci.com 2/25/00

Re: Establishing a Vib Program with Reputable Vendor Ibrahim H Caglayan, PhD 4/4/00

Re: Establishing a Vib Program with Reputable Vendor Bill Gonser, Sr. Reliability Engineer, Disneyland Resort 3/9/00

Re: Establishing a Vib Program with Reputable Vendor Sid Booksh, MTS  Anchorage, AK   (mts.ak@att.net) 2/28/00

Re: Establishing a Vib Program with Reputable Vendor ian.kinnaird@scottishpower.plc.uk 3/17/00

Roll paper vibration Candi Jordan 2/25/00

Re: Roll paper vibration Peter Burgess 7/19/00

Use of a microphone Matthew Hornby, thew@cwcom.net 2/23/00

High vibration on gearbox, but not at gear mesh frequency Brad B. 2/22/00

Re: High vibration on gearbox, but not at gear mesh frequency Hugo van Tienhoven 4/3/00

Re: High vibration on gearbox, but not at gear mesh frequency sajeev 3/2/00

Re: High vibration on gearbox, but not at gear mesh frequency kiurtxi@wanadoo.es 10/3/01

Re: High vibration on gearbox, but not at gear mesh frequency B. Wieting 2/25/00

Re: High vibration on gearbox, but not at gear mesh frequency greg_klein@huntsman.com 2/24/00

Máquina para ensayos de velocidad crítica en ejes Bogotá, Colombia 2/16/00

Re: Máquina para ensayos de velocidad crítica en ejes Manel Montesinos  E-mail : mgeorgi@teleline.es 2/18/00

How to connect strain gage to PCB? ham_iza@hotmail.com 2/16/00

Measuring vibration frequencies in pagers hamsatun@hotmail.com 2/15/00

Re: Measuring vibration frequencies in pagers 4/12/04

Re: Measuring vibration frequencies in pagers 4/12/04

Re: Measuring vibration frequencies in pagers B Wieting 2/18/00

Dasylab 5.0 wanted: Matt Ebben 2/12/00

Vibration in neonatal transport Jcloherty@srht.nwest.nhs.uk 2/10/00

Re: Vibration in neonatal transport jay Pleckham 9/15/04

Re: Vibration in neonatal transport Andy Leslie, Neonatal Unit, Nottingham 6/13/00

Re: Vibration in neonatal transport Sid Booksh    MTS  Anchorage, AK   mts.ak@att.net 2/28/00

Information on design of shock and vibration isolaters specially those made of elastomers on the Internet khusrau7@hotmail.com 2/3/00

Re: Information on design of shock and vibration isolaters specia... B. Wieting 2/15/00

Re: Information on design of shock and vibration isolaters sp... khusrau7@hotmail.com 2/17/00

Re: Information on design of shock and vibration isolaters sp... B Wieting 2/18/00

Gear Box - Vibrtion Ashok Sundara Raman 2/2/00

Re: Gear Box - Vibrtion ahmeddokki@hotmail.com 2/13/00

Re: Gear Box - Vibration sajeevk@hotmail.com 2/3/00

Re: Gear Box - Vibration ashok sundararaman 2/10/00

Generator  exciter assembly failure G.  Williams 1/31/00

Re: Generator  exciter assembly failure Dan Timberlake 10/3/00

Life prediction of Shock and vibration mounts made of aRubber MA Khan, khusrau7@hotmail.com 1/31/00

Vibraciones en tres direcciones. Manel Montesinos ; mgeorgi@teleline.es 1/30/00

Re: Vibraciones en tres direcciones. Ibrahim H Caglayan, PhD 4/4/00

Re: Vibraciones en tres direcciones. sajeevk@hotmail.com 2/11/00

Change over Clancy 1/29/00

Reciprocating equipment. jvickery@petro-canada.ca 1/28/00

Re: Reciprocating equipment. Sid Booksh  MTS Anchorage, AK        mts.ak@att.net 2/28/00

Re: Reciprocating equipment. Mark_Hensley@udscorp.com 2/3/00

Even Harmonics of Bearing Fault Frequency Rex Kirkland 1/27/00

Re: Even Harmonics of Bearing Fault Frequency Matthew Hornby 2/23/00

Re: Even Harmonics of Bearing Fault Frequency byron.martin@skf.com 1/28/00

Re: Even Harmonics of Bearing Fault Frequency greg_klein@huntsman.com 1/28/00

Vibration Analysis Software gatgscs@yahoo.com 1/27/00

Re: Vibration Analysis Software Don Lag 3/24/00

Re: Vibration Analysis Software Don Bloyd  (debloyd@ppco.com) 3/22/00

Re: Vibration Analysis Software Mark_Hensley@udscorp.com 2/3/00

Re: Vibration Analysis Software Jim Taylor 12/14/01

Small Armature Balancer Info Needed Tom   englhar@ulink.net 1/26/00

Re: Small Armature Balancer Info Needed wafa 12/3/04

Re: Small Armature Balancer Info Needed Iran 5/12/04

Random vibration control Oded Dancygier 1/26/00

Vibration Screening of production instruments Greg B. 1/25/00

Current Analisis sajeevk@hotmail.com  1/25/00

Re: Current Analisis Keith 1/28/00

Re: Current Analisis Jeff 2/9/00

Overall Velocity (RMS or Peak?) Shannon Craig 1/24/00

Re: Overall Velocity (RMS or Peak?) vasanth bhat 4/16/00

Re: Overall Velocity (RMS or Peak?) Wilton Costa 1/25/00

Re: Overall Velocity (RMS or Peak?) Alex J 1/25/00

Re: Overall Velocity (RMS or Peak?) Byron Martin 1/25/00

Vibration readings on reciprocating pumps david.schellang@ssc.nasa.gov 1/7/00

Re: Vibration readings on reciprocating pumps jvickery@petro-canada.ca 1/28/00

Building Vibration Criteria donn@facilities.rocherster.edu 1/6/00

Re: Building Vibration Criteria Sid Booksh (Machinery Technical Support,  mts.ak@att.net) 1/6/00

Re: Building Vibration Criteria  1/21/00

vibration as power Sarah:  odobel@ne.netscape.net 1/4/00

Re: vibration as power Gavin Shell gavrrr@iaa.com.au 2/21/00

Engineer Needed 1/8/04

Engineer Needed 1/8/04

Re: vibration as power 1/8/04

High 1x in a RotoJet pump mcmll5@bellsouth.net 1/3/00

Vibration Transmissions From Tractor Trailers to Pavement mbruno@wpi.edu 12/30/99

Re: Vibration Transmissions From Tractor Trailers to Pavement Edward Mosch emosch@harris.com 12/30/99

BENEFITS OF VIBRATION ANALYSIS EDITTBR@MAIL.DREAMSCAPE.COM 12/20/99

Re: BENEFITS OF VIBRATION ANALYSIS Sid Booksh  (Machinery technical Support)  mts.ak@att.net 1/5/00

Re: BENEFITS OF VIBRATION ANALYSIS jdshinn@bellsouth.net 12/23/99

Request for Vibration and Consulting assistance Rob Robinson 12/17/99

Re: Request for Vibration and Consulting assistance Aimmee Hagler 1/9/01

Re: Request for Vibration and Consulting assistance cpowell@structuraltechnology.com 12/31/99

Re: Request for Vibration and Consulting assistance Byron Martin@skf.com 12/23/99

Vibration and acoustic isolation chamber Rob Robinson 12/17/99

Re: Vibration and acoustic isolation chamber cpowell@structuraltechnology.com 12/31/99

Re: Vibration and acoustic isolation chamber Ray Kelm, P.E. - Kelm Engineering 12/27/99

frequency of minerals impjade@island.net 12/13/99

Fair Market Value jjohnson@kenai.net 12/13/99

Re: Fair Market Value Sid Booksh, Machinery Technical Support, mts.ak@att.net 1/5/00

Any natural frequency detecting equipment Wee Yew Yee 12/10/99

Re: Any natural frequency detecting equipment Andy Conkey 12/12/99

NTN Bearings website. With frequency data. Gavin Shell   gshell1@ford.com 12/9/99

Re: NTN Bearings website. With frequency data. jdshinn@bellsouth.net 12/9/99

Re: NTN Bearings website. With frequency data. byron martin@skf.com 12/23/99

Re: NTN Bearings website. With frequency data. Gavin Shell 12/15/99

space damper s7526004@yahoo.com 12/7/99

help me to find "space damper " article s7526004@yahoo 12/7/99

 

Natural frequency of a Bottle of Wine Timothy Coltzau 12/2/99

Re: Natural frequency of a Bottle of Wine Trevor Huf 3/3/00

Re: Natural frequency of a Bottle of Wine Ray Kelm - rkelm@flash.net 12/27/99

Re: Natural frequency of a Bottle of Wine Gavin Shell   gavrrr@iaa.com.au 12/6/99

3000 Hz peak on an NC Machine Gavin Shell.  gshell1@ford.com 12/1/99

Re: 3000 Hz peak on an NC Machine Scoobygpc@aol.com 1/1/00

Re: 3000 Hz peak on an NC Machine Ray Kelm - Kelm Engineering 12/27/99

Re: 3000 Hz peak on an NC Machine B Wieting 12/8/99

Re: 3000 Hz peak on an NC Machine Gavin Shell 12/9/99

Bandwidth change on HP3561A Andy Conkey(apconkey@tamu.edu) 11/30/99

Re: Bandwidth change on HP3561A MG Womack 12/9/99

PM/CM Ratio Mike Lee 11/29/99

Re: PM/CM Ratio Ray Beebe 12/19/99

what's the practical applications of tuned absorber technique Li Zhou 11/27/99

Re: what's the practical applications of tuned absorber technique Viktor718@aol.com 12/1/03

Re: what's the practical applications of tuned absorber technique Ray Kelm - Kelm Engineering 12/27/99

Re: what's the practical applications of tuned absorber technique Ray Beebe 12/19/99

Re: what's the practical applications of tuned absorber technique Todd Dahling, dahling.todd@orbital-lsg.com 12/7/99

Re: what's the practical applications of tuned absorber techn... Khalid Sarh 12/15/99

Re: what's the practical applications of tuned absorber technique Edward Mosch 11/29/99

Re: what's the practical applications of tuned absorber technique jdshinn@bellsouth.net 11/28/99

Software Development Request WMcKCE@aol.com 11/23/99

Re: Software Development Request Ron Palmer 7/21/00

Phase Shift through Resonance Tony Alex - Sr. Engineer, EquiStar Chemicals 11/23/99

Re: Phase Shift through Resonance William C. Foiles 12/12/99

Re: Phase Shift through Resonance Rusty Castleman 12/10/99

Re: Phase Shift through Resonance Rusty Castleman 12/10/99

Re: Phase Shift through Resonance Todd Dahling; dahling.todd@orbital-lsg.com 12/7/99

Re: Phase Shift through Resonance Edward Mosch 11/29/99

Vibration Specifications for Rack mounted Computer and Electronics Equipment Michael O'Connell   mdoconn@us.ibm.com 11/23/99

Re: Vibration Specifications for Rack mounted Computer and Electr... Edward Mosch 11/29/99

IMPACT TESTING HAMMER dmckay@smurtit.com 11/23/99

Re: IMPACT TESTING HAMMER jdshinn@bellsouth.net 11/24/99

Re: IMPACT TESTING HAMMER bpkoltvedt@shellus.com 12/13/99

Re: IMPACT TESTING HAMMER bhairgrove@csw.com 3/2/00

Re: IMPACT TESTING HAMMER jdshinn@bellsouth.net 12/15/99

Re: IMPACT TESTING HAMMER jdshinn@bellsouth.net 11/24/99

vibration from construction jan.kris.e.na@prodigy.com 11/21/99

Re: vibration from construction drabkin@consela.com 3/30/00

used vibration equipment gordie lane 11/18/99

Re: used vibration equipment Carl Bosson 12/24/00

Re: used vibration equipment Ron Hartlen 11/18/99

laser vibration measurement Anthony Bliss (anthony.bliss@edwards.boc.com) 11/15/99

Re: laser vibration measurement Tim Wechsler 12/15/99

Re: laser vibration measurement David Oliver 6/20/02

Re: laser vibration measurement Byron Martin - SKF Service 11/23/99

Re: laser vibration measurement Anthony Bliss 12/2/99

Help me select a hand held collector Shannon Craig 11/11/99

Re: Help me select a hand held collector hasan6567@yahoo.com 2/3/05

Re: Help me select a hand held collector esc@net-one.it 4/5/01

Re: Help me select a hand held collector Sid Booksh, Machinery Technical Support,  mts.ak@att.net 1/5/00

Re: Help me select a hand held collector hasan6567@yahoo.com 2/3/05

Re: Help me select a hand held collector Rich Pratt 12/9/99

Re: Help me select a hand held collector Christopher Merritt Vibration  Analyst -Tesoro Alaska 11/29/99

Re: Help me select a hand held collector Christopher Merritt Vibration  Analyst -Tesoro Alaska 11/29/99

Re: Help me select a hand held collector Byron Martin - SKF Service 11/23/99

Re: Help me select a hand held collector jdshinn@bellsouth.net 11/12/99

Re: Help me select a hand held collector BP Amoco Vib. Analyst: JW Stokes 11/12/99

Re: Help me select a hand held collector Gary F. 8/13/01

Re: Help me select a hand held collector jdshinn@bellsouth.net 11/11/99

Re: Help me select a hand held collector Shannon Craig 11/12/99

Re: Help me select a hand held collector David Zimny 1/24/00

Re: Help me select a hand held collector George Johnston - ARCO Alaska 12/16/99

Torsional Vibrations Andy Conkey(apconkey@tamu.edu) 11/9/99

Re: Torsional Vibrations Ibrahim H Caglayan, PhD 4/4/00

Re: Torsional Vibrations jdshinn@bellsouth.net 11/9/99

Re: Torsional Vibrations vtao2@cistron.nl 4/3/00

Please tell me about new information Gordon@reliability.com.tw 11/8/99

vibration testing jennifer badham <badhamja@cardiff.ac.uk> 11/4/99

Re: vibration testing test 9/4/03

Re: vibration testing W. C. Foiles 11/8/99

Diesel Generator Vibration Bill Powell 11/3/99

Re: Diesel Generator Vibration rob mooij - Techno Fysica bv 1/29/02

Re: Diesel Generator Vibration vietijg@oriantek.com 8/16/01

Re: Diesel Generator Vibration ahmeddokki@hotmail.com 2/12/00

thickener rake vibration cowhert@ohioedison.com 10/30/99

Re: thickener rake vibration Sid Booksh (Machinery technical Support) mts.ak@att.net 1/6/00

Re: thickener rake vibration cowhert@firstenergycorp.com 2/16/01

Welcome Vibration Institute 10/23/99

Re: WelCome test 3/26/02